{"title":"5 Lug Wheel Spacers","description":"\u003ch2\u003e5 Lug Wheel Spacers by Bolt Pattern: 5x114.3, 5x120, 5x4.75\", 5x5\", 5x5.5\", 5x100, 5x112 and More\u003c\/h2\u003e\n\u003cp\u003e5 lug wheel spacers matched by bolt pattern, hub and thread: 5x114.3 pairs and slip-ons for the Civic 2006–2026 (not the Type R), Camry 1996–2023, Altima 2002–2025, Mustang 1994–2026 and Wrangler TJ 1997–2006; 5x127 pairs for the Wrangler JK 2007–2018 and Grand Cherokee 1999–2023; 5x100 pairs for the base Subaru Impreza 1993–2004.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/how-to\/are-wheel-spacers-safe-understanding-their-safety-features\"\u003eBolt-on or slip-on, and are they safe? Read our wheel spacer guide →\u003c\/a\u003e\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003e5 lug spacer fitment guide \u0026amp; common questions\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch3\u003e5x114.3 (5x4.5\") wheel spacers: pick by hub bore and thread\u003c\/h3\u003e\n\u003cp\u003e5x114.3 is the most common 5 lug pattern, but the hub bore and stud thread change from make to make, so match both:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e64.1mm hub, 12x1.5:\u003c\/strong\u003e Honda Civic 2006–2026 (not the Type R), Accord 2003–2026, US CR-V 1997–2026 and HR-V 2016–2026 and Acura TSX 2004–2014 and RDX 2007–2024 take the 5x4.5\" bolt-on pair with 12x1.5 studs (73mm center bore, 0.75\" to 2\"); the Hondas and the TSX and RDX, which its listing names, also take the Honda 15mm hub centric slip-on pair (installed with its included extended studs, with a 64mm centering lip your wheel's center bore must accept), and all of these cars, the cars its listing names, also take the 5x4.5\" hub centric Honda and Acura bolt-on pair (64.1mm bore, 12x1.5 studs, 1\", for factory wheels with a 64.1mm center bore). Never shorten the studs on a slip-on; keep the thread engagement required by the vehicle, wheel and fastener manufacturers, fit suitable longer studs if they fall short, and check that closed-end lug nuts do not bottom out. See \u003ca href=\"\/collections\/honda-wheel-spacers\"\u003eHonda\u003c\/a\u003e and \u003ca href=\"\/collections\/acura-wheel-spacers\"\u003eAcura wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e66.1mm hub, 12x1.25:\u003c\/strong\u003e Nissan 350Z 2003–2009, 370Z 2009–2020, Altima 2002–2025, Maxima 1989–2023 and Rogue 2008–2026 and Infiniti G35 2003–2008, G37 2008–2014 and Q50 2014–2022 take the Nissan and Infiniti 10mm and 15mm hub centric slip-on pairs (each with a 66.1mm centering lip your wheel's center bore must accept); all of them, the cars its listing names, also take the 5x4.5\" hub centric Nissan and Infiniti bolt-on pair (66.1mm bore, 12x1.25 studs, 1\" or 1.25\", for factory wheels with a 66.1mm center bore). Never shorten the studs on a slip-on; keep the thread engagement required by the vehicle, wheel and fastener manufacturers, fit suitable longer studs if they fall short, and check that closed-end lug nuts do not bottom out. See \u003ca href=\"\/collections\/nissan-wheel-spacers\"\u003eNissan\u003c\/a\u003e and \u003ca href=\"\/collections\/infiniti-wheel-spacers\"\u003eInfiniti wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60.1mm hub, 12x1.5:\u003c\/strong\u003e Toyota Camry 1996–2023, RAV4 1996–2026, Highlander 2001–2026, Avalon 1995–2022 and Sienna 1998–2026 take the 5x4.5\" bolt-on pair with 12x1.5 studs (73mm center bore, 0.75\" to 2\"); all five, the cars its listing names, also take the 5x4.5\" hub centric Lexus and Toyota pair (60.1mm bore, 12x1.5 studs, 1\", for factory wheels with a 60.1mm center bore). See \u003ca href=\"\/collections\/toyota-wheel-spacers\"\u003eToyota wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e67.1mm hub, 12x1.5:\u003c\/strong\u003e Mazda3 2004–2026, CX-5 2013–2026 and MX-5 Miata 2006–2015, Hyundai Elantra 2007–2023, Sonata 2006–2023 and Genesis Coupe 2010–2016, Kia Forte 2010–2022, Mitsubishi Lancer 2008–2017 and Lancer Evolution 2003–2015, Ford Escape 2001–2012 and Fusion 2006–2012 and the first-generation Jeep Compass 2007–2017 and Patriot 2007–2017 take the 5x4.5\" hub centric pair with a 67.1mm bore (12x1.5 studs, 1\", for factory wheels with a 67.1mm center bore; on a 2017 Compass, measure the bolt pattern first, because a second-generation Compass was also sold as a 2017) or the 5x4.5\" bolt-on pair with 12x1.5 studs (73mm center bore, 0.75\" to 2\").\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e56.1mm hub, 12x1.25:\u003c\/strong\u003e Subaru Forester 2019–2026, Outback 2015–2026, Legacy 2015–2025, WRX 2015–2026, WRX STI sedan 2005–2007, WRX STI 2008–2021 and Crosstrek 2024–2026 use 5x114.3 with a 56.1mm hub and a 12x1.25 thread. The 5x4.5\" hub centric Subaru pair (56.1mm bore, 12x1.25 studs, 1\", for factory wheels with a 56.1mm center bore) is listed for all of them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70.5mm hub:\u003c\/strong\u003e Ford Mustang 1994–2014 (1\/2\"-20) takes the 5x4.5\" hub centric Mustang pair (70.6mm bore, 1\/2\" studs, 1\" to 2\"), whose listing covers original wheels and, for vehicles not on its list, a factory hub shaped like its diagram and no taller than 20mm; the Mustang 2015–2026 (14x1.5) takes the 5x4.5\" bolt-on pair with 14x1.5 studs (73mm center bore, 1\"). See \u003ca href=\"\/collections\/ford-wheel-spacers\"\u003eFord wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e71.5mm hub, 1\/2\"-20:\u003c\/strong\u003e Jeep Wrangler YJ 1987–1995 and TJ 1997–2006, Cherokee XJ 1984–2001, Grand Cherokee ZJ 1993–1998 and US Liberty 2002–2012 take the 5x4.5\" hub centric Jeep pair (71.5mm bore, 1\/2\" studs, 1.5\" or 2\"), listed for original wheels and, for vehicles not on its list, a factory hub shaped like its diagram and no taller than 20mm. See \u003ca href=\"\/collections\/jeep-wheel-spacers\"\u003eJeep wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e64.1mm hub, 14x1.5:\u003c\/strong\u003e Tesla Model Y 2020–2026 and Model 3 2017–2023 take the 5x4.5\" bolt-on pair with 14x1.5 studs (73mm center bore, 1\"), which clears the hub and centers on the studs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e5x120 wheel spacers: BMW, Honda, Acura, GM, Tesla and Land Rover\u003c\/h3\u003e\n\u003cp\u003eThe Honda Pilot 2009–2026, Odyssey 2005–2026 and Ridgeline 2006–2014 and 2017–2026, the Acura MDX 2007–2013, 2017–2020 and 2022–2024 and TLX 2021–2025, the Tesla Model S 2012–2026 and Model X 2016–2026, the Chevy Camaro 2010–2024 and the Cadillac CTS 2008–2019 and CT5 2020–2026 use 5x120 with a 14x1.5 thread; the Hondas, Acuras and Teslas have a 64.1mm hub and the Camaro, CTS and CT5 a 66.9mm hub. The Hondas, Acuras, Camaro, CTS and CT5 fit the 5x120 pair with a 72.56mm center bore (14x1.5 studs, 1.25\" or 1.5\"), which clears the hub and centers on the studs (the Teslas share the pattern, thread and hub, but neither 5x120 pair's listing names them); the 5x120 pair with a 67.1mm center bore (14x1.5 studs, 1\") is listed for the same cars but not the Teslas. The Land Rover Discovery 1999–2004 and US Range Rover 1996–2002 (P38A, 70.1mm hub) take the 72.56mm-bore pair. BMWs on 5x120 have a 72.6mm or 74.1mm hub and lug bolts in 12x1.5, 14x1.25 or 14x1.5: see \u003ca href=\"\/collections\/bmw-wheel-spacers\"\u003eBMW wheel spacers\u003c\/a\u003e for the spacers matched to them.\u003c\/p\u003e\n\u003ch3\u003e5x120.65 (5x4.75\") wheel spacers for GM cars and classic Jaguars\u003c\/h3\u003e\n\u003cp\u003e12x1.5 thread and a 70.3mm hub: Chevy Corvette 1984–2019, Camaro 1982–2002, S10 1982–2004 and Blazer 1995–2005 and GMC Envoy 1998–2000. Choose the 5x4.75\" hub centric Corvette pair (70.3mm bore, 12x1.5 studs, 1\" to 2\"), whose listing covers original wheels and, for vehicles not on its list, a factory hub shaped like its diagram and no taller than 20mm; all of them, the cars its listing names, can also take the 5x4.75\" bolt-on pair with 12x1.5 studs (74.1mm center bore, 0.75\" to 3\"), which its listing describes for aftermarket 5x4.75\" wheels. On the Camaro 1982–2002, use the hub centric pair on the front axle only, and before fitting the 74.1mm-bore pair on the rear, measure the rear hub pilot: the center bore must clear it. 7\/16\"-20 thread: Chevy Camaro 1967–1981, Impala 1958–1970, Bel Air 1955–1970 and Pontiac Firebird 1967–1981 fit the 5x4.75\" bolt-on pair with 7\/16\" studs (73.1mm center bore, 1\" to 2\"). Some 1955–1970 full-size wagons and heavy-duty cars may be 5x127, so on one of those measure the bolt pattern first. On the Firebird 1982–2002 the hub centric pair goes on the front axle only, and the rear pilot is confirmed at 74.1mm only on some years, so see our Pontiac page before ordering. The Jaguar XJ6 1970–1997 and US XK8 1997–2006 are 5x4.75\" with a 1\/2\"-20 thread: see \u003ca href=\"\/collections\/jaguar-wheel-spacers\"\u003eJaguar wheel spacers\u003c\/a\u003e. More GM cars: \u003ca href=\"\/collections\/chevy-wheel-spacers\"\u003eChevy\u003c\/a\u003e and \u003ca href=\"\/collections\/pontiac-wheel-spacers\"\u003ePontiac wheel spacers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e5x127 (5x5\") wheel spacers for Jeep and Dodge\u003c\/h3\u003e\n\u003cp\u003eEvery 5x127 Jeep below has a 71.5mm hub; the stud thread decides the pair. 1\/2\"-20: Wrangler JK 2007–2018, Grand Cherokee WJ 1999–2004 and WK 2005–2010 and Commander 2006–2010 fit the 5x5\" hub centric Jeep pair (71.5mm bore, 1\/2\" studs, 1.25\" or 2\"), whose listing covers original wheels and, for vehicles not on its list, a factory hub shaped like its diagram and no taller than 20mm; all of them, the applications its listing names, also fit the 5x5\" bolt-on pair with 1\/2\" studs (78.3mm center bore, 0.75\" to 2\"). 14x1.5: the Grand Cherokee 2011–2023, Wrangler JL 2018–2023, Gladiator 2020–2023 and Dodge Durango 2011–2022, the applications its listing names, fit the 5x5\" bolt-on pair with 14x1.5 studs (78.3mm center bore, 1\" to 2\"). On a 2018 Wrangler, confirm JK or JL first. For the older full-size Chevys on 5x127, see our \u003ca href=\"\/collections\/chevy-wheel-spacers\"\u003eChevy wheel spacers\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003e5x139.7 (5x5.5\") wheel spacers for Ram, Dodge, Jeep and older Ford trucks\u003c\/h3\u003e\n\u003cp\u003eOn these five-lug trucks the stud thread sets the pair: 1\/2\"-20 and a 77.8mm hub on the Ram 1500 1999–2001 (the 5x5.5\" pair with 1\/2\" studs, 1\" to 2\"); 9\/16\"-18 on the Ram 1500 2002–2011 (77.8mm hub), Dakota 2005–2011 and Durango 2004–2009 (the 5x5.5\" pair with 9\/16\" studs, 1\" to 2\", or the 5x5.5\" hub centric pair with 9\/16\" studs and a 78mm bore, 2\"); 14x1.5 and a 77.8mm hub on the Ram 1500 2012–2018 and Ram 1500 Classic 2019–2022 (the 5x5.5\" pair with 14x1.5 studs, 108mm center bore, 1.25\" to 2\"). The Jeep CJ-5 1955–1983, CJ-7 1976–1986 and CJ-8 Scrambler 1981–1986 and the Ford F-150 1987–1996 and Bronco 1966–1996 (not the Bronco II) use 5x139.7 with a 1\/2\"-20 thread and take the 5x5.5\" bolt-on pair with 1\/2\" studs (1\" to 2\"), whose listing names \"All Jeep\", the CJs of 1946–1985 and the 1986 CJ-7 and CJ-8 Scrambler. On a 1986 CJ-7 or CJ-8, and on any CJ, measure the 108mm hub against the pair's 108.2mm center bore before ordering, and since some early Jeeps have left-hand threads on the driver's side, check the thread direction on each side. See \u003ca href=\"\/collections\/dodge-wheel-spacers\"\u003eDodge and Ram wheel spacers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e5x115, 5x100, 5x110, 5x108, 5x135 and 5x150 wheel spacers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x115:\u003c\/strong\u003e Chrysler 300 2005–2023, Dodge Charger 2006–2023 and Challenger 2008–2023 use 5x115 with a 14x1.5 thread. Both 5x115 pairs are listed for all three: the hub centric pair (71.5mm bore, 14x1.5 studs, 1\") and the bolt-on pair (73.1mm center bore, 14x1.5 studs, 0.75\" to 2\"). See \u003ca href=\"\/collections\/chrysler-wheel-spacers\"\u003eChrysler wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x100:\u003c\/strong\u003e Subaru Impreza 1993–2023 (not the WRX STI), WRX 2002–2014 (not the STI), US Forester 1998–2018, Legacy 1990–2014, Outback 1995–2014, Crosstrek 2013–2023 and BRZ 2013–2020 and 2022–2026 and the Scion FR-S 2013–2016 use 5x100 with a 56.1mm hub and a 12x1.25 thread. The 5x100 hub centric Subaru pair (56.1mm bore, 12x1.25 studs, 1\", for factory wheels with a 56.1mm center bore) is listed for the base Impreza 1993–2004, the Impreza 2.5i and Outback Sport, the Impreza WRX Sport Wagon and TR sedan 2002–2007, the WRX 2008–2014, the Impreza 2009–2023 (not the WRX STI), the US Forester L, S, 2.5X and 2.5XT 1998–2008 and US Forester 2009–2018, the Legacy 1990–2014, Outback 1995–2014, Crosstrek 2013–2023 and BRZ 2013–2020 and 2022–2026 and the Scion FR-S 2013–2016; for another trim of these years, check that pair's listing first. The US Toyota Corolla sedan 2003–2026 (not the Cross, iM, GR or hatchback) and Prius 2004–2022 (54.1mm hub, 12x1.5; the Prius v and Prius c are not matched here) take the 5x100 bolt-on pair (57.1mm center bore, 1\" to 2\"); both also take the 5x100 hub centric Toyota and Scion pair (54.1mm bore, 1\", for factory wheels with a 54.1mm center bore), whose listing names the Corolla sedan through 2026 and the Prius through 2022. For VW and Audi 5x100 cars, see \u003ca href=\"\/collections\/vw-wheel-spacers\"\u003eVW wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x110:\u003c\/strong\u003e Saturn Sky 2007–2010, Pontiac G6 Base\/GT 2005–2010 and Solstice 2006–2010 and Chevy HHR 2006–2011 (65.1mm hub, 12x1.5) use 5x110. The 5x110 hub centric slip-on pair (65.1mm bore, 5mm) is listed for all four: check your hub diameter before ordering it. On studs, never shorten the studs on a slip-on; keep the thread engagement required by the vehicle, wheel and fastener manufacturers, fit suitable longer studs if they fall short, and check that closed-end lug nuts do not bottom out. It is flat: a flat spacer centers itself on the hub; the wheel still needs enough factory hub pilot beyond the spacer to engage its center bore. The 5x110 bolt-on pair (65.1mm bore, 12x1.5 studs, 1\" or 1.25\") is listed for all four too. See \u003ca href=\"\/collections\/saturn-wheel-spacers\"\u003eSaturn\u003c\/a\u003e and \u003ca href=\"\/collections\/saab-wheel-spacers\"\u003eSaab wheel spacers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x108:\u003c\/strong\u003e Ford Taurus 1986–2007, Focus 2012–2018, Escape 2013–2022 and Bronco Sport 2021–2023 and the Jaguar XF 2009–2024 (63.4mm hub, 12x1.5) take the 5x4.25\" bolt-on pair (70.7mm center bore, 12x1.5 studs, 1\" or 1.25\").\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x135:\u003c\/strong\u003e the five-lug Ford F-150 2001–2003 (87.1mm hub, 14x2.0; the heavy-duty 7700 payload package has seven-lug wheels and a different pattern, so count the lugs) takes the 5x135 hub centric pair (87.1mm bore, 14x2.0 studs, 1\" to 2\") or the 5x135 bolt-on pair (87.2mm center bore, 14x2.0 studs, 1\" to 2\"). A five-lug 2000 F-150 built before November 27, 1999 has a 12x1.75 thread, which these pairs do not match, and one built on or after that date has 14x2.0, so on a 2000 check the thread before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x150:\u003c\/strong\u003e Toyota Tundra 2007–2021 and Land Cruiser 1998–2021 (110mm hub, 14x1.5) take the 5x150 bolt-on pair (110.1mm center bore, 14x1.5 studs, 1\" to 2\"); both also take the 5x150 hub centric Tundra pair (110mm bore, 14x1.5 studs, 1.5\" or 2\", for factory wheels with a 110mm center bore), whose listing names both.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMany Mercedes, Audi and VW cars on 5x112 and many Porsches on 5x130 (five-lug hubs only, never center-lock wheels) hold their wheels with lug bolts, and some use lug nuts on studs, so check yours. On a lug-bolt car, bolt-on spacers do not include lug bolts: the pair mounts to the hub with hub-side lug bolts in the vehicle's required thread and the pair's required seat, bought separately. Those hub-side bolts must reach full thread engagement in the hub, with their heads fully recessed below the pair's wheel-side face so the wheel seats flush. See \u003ca href=\"\/collections\/mercedes-wheel-spacers\"\u003eMercedes\u003c\/a\u003e, \u003ca href=\"\/collections\/audi-wheel-spacers\"\u003eAudi\u003c\/a\u003e and \u003ca href=\"\/collections\/porsche-wheel-spacers\"\u003ePorsche wheel spacers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003e5 lug universal slip-on rings\u003c\/h3\u003e\n\u003cp\u003eThe 3mm and 5mm rings are slotted for 4 and 5 lug patterns from 100mm to 120mm, the 3\/16\" and 5\/16\" rings for 5x100 to 5x120 (the 5\/16\" ring is not for a 5x100 hub with 14x1.5 studs), the 1\/4\", 3\/16\" and 1\/2\" rings for 5x4.5\" to 5x5\", the 1\/2\" ring for 5x108 to 5x127 and the 1\/4\" ring for 5x150 and 7x150. They are not hub centric, so check that the ring's center opening clears your hub and that your studs or bolts keep full thread engagement at that thickness. On studs, never shorten the studs on a slip-on; keep the thread engagement required by the vehicle, wheel and fastener manufacturers, fit suitable longer studs if they fall short, and check that closed-end lug nuts do not bottom out.\u003c\/p\u003e\n\u003ch3\u003eHow to choose a 5 lug spacer: slip-on or bolt-on, thread, hub bore and thickness\u003c\/h3\u003e\n\u003cp\u003eSlip-on spacers slide over existing wheel studs like a thick washer, ideal for thin adjustments. Bolt-on spacers bolt directly to factory studs using separate hardware and feature their own integrated studs to mount the wheel, ideal for wider setups. Hub centric is an attribute of both types: a hub centric spacer is bored to the hub diameter, so the hub, not the studs, centers it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e a bolt-on pair's studs must carry your vehicle's thread. On a hub with wheel studs, lug nuts in your vehicle's stud thread and the pair's required seat clamp the pair to the hub. On a hub with lug bolts, bolt-on spacers do not include lug bolts: the pair mounts to the hub with hub-side lug bolts in the vehicle's required thread and the pair's required seat, bought separately. Those hub-side bolts must reach full thread engagement in the hub, with their heads fully recessed below the pair's wheel-side face so the wheel seats flush. The wheel then mounts on the pair's studs with lug nuts that match both the pair's stud thread and your wheels' seat (check whether the listing includes nuts).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub bore:\u003c\/strong\u003e a hub centric spacer's bore matches the hub; a lug centric pair's center bore only has to clear it. A bore smaller than your hub will not seat. If your vehicle is not named above, measure the hub, or \u003ca href=\"\/pages\/how-to-measure-wheel-adapter-bolt-patterns\"\u003emeasure your bolt pattern\u003c\/a\u003e if you are unsure of it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness available:\u003c\/strong\u003e slip-on 3mm to 20mm; bolt-on 0.75\" to 3\" depending on the pair. Start with the thinnest that clears; on a thin bolt-on pair whose listing says so, factory studs that stand proud of its face and stop the wheel seating flush need shortening, most often at 1\"; never shorten the studs on a slip-on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque:\u003c\/strong\u003e torque to your vehicle maker's specification and check the nuts or bolts again after the first 50 to 100 miles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich 5 lug spacers fit a Jeep Wrangler?\u003c\/strong\u003e Wrangler YJ 1987–1995 and TJ 1997–2006: the 5x4.5\" hub centric Jeep pair (original wheels; if not on its list, a hub shaped like its diagram and no taller than 20mm). Wrangler JK 2007–2018: the 5x5\" hub centric Jeep pair (original wheels; if not on its list, a hub shaped like its diagram and no taller than 20mm), or the 5x5\" pair with 1\/2\" studs. Wrangler JL 2018–2023 (5x127, 14x1.5 studs, 71.5mm hub): the 5x5\" pair with 14x1.5 studs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich spacers fit a Ford Mustang?\u003c\/strong\u003e Mustang 1994–2014: the 5x4.5\" hub centric Mustang pair (70.6mm bore, 1\/2\" studs; original wheels; if not on its list, a hub shaped like its diagram and no taller than 20mm). Mustang 2015–2026: the 5x4.5\" pair with 14x1.5 studs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich spacers fit a Subaru?\u003c\/strong\u003e On 5x100, the base Impreza 1993–2004, the WRX 2002–2007 Sport Wagon and TR sedan (not the STI), the WRX 2008–2014 (not the STI), the Impreza 2009–2023 (not the WRX STI), the US Forester 1998–2008 in L, S, 2.5X and 2.5XT trim and US Forester 2009–2018, the Legacy 1990–2014, Outback 1995–2014, Crosstrek 2013–2023 and BRZ 2013–2020 and 2022–2026, the cars and trims its listing names: the 5x100 hub centric Subaru pair (for factory wheels with a 56.1mm center bore); for another trim of these years, check that pair's listing first. On 5x114.3, the WRX STI sedan 2005–2007, WRX STI 2008–2021, WRX 2015–2026, Forester 2019–2026, Outback 2015–2026, Legacy 2015–2025 and Crosstrek 2024–2026, the cars its listing names: the 5x4.5\" hub centric Subaru pair (for factory wheels with a 56.1mm center bore).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need longer studs with a slip-on spacer?\u003c\/strong\u003e Usually. A slip-on takes its own thickness out of the thread engagement, so measure what is left and fit longer studs or bolts if it is short. On studs, never shorten the studs on a slip-on; keep the thread engagement required by the vehicle, wheel and fastener manufacturers, fit suitable longer studs if they fall short, and check that closed-end lug nuts do not bottom out. On lug bolts, use longer lug bolts in your vehicle's thread and your wheel's seat, long enough for the thread engagement required by the vehicle, wheel and fastener manufacturers at the spacer thickness you choose, and check that they do not contact brake or other components.\u003c\/p\u003e\n\u003ch3\u003eMore wheel spacers\u003c\/h3\u003e\n\u003cp\u003eBrowse all \u003ca href=\"\/collections\/wheel-spacers\"\u003ewheel spacers\u003c\/a\u003e, \u003ca href=\"\/collections\/hub-centric-slip-on-wheel-spacers\"\u003ehub centric slip-on wheel spacers\u003c\/a\u003e, \u003ca href=\"\/collections\/hub-centric-bolt-on-wheel-spacers\"\u003ehub centric bolt-on wheel spacers\u003c\/a\u003e and \u003ca href=\"\/collections\/bolt-on-wheel-spacers\"\u003ebolt-on wheel spacers\u003c\/a\u003e, or other lug counts: \u003ca href=\"\/collections\/4-lug-wheel-spacers\"\u003e4 lug\u003c\/a\u003e and \u003ca href=\"\/collections\/6-lug-wheel-spacers\"\u003e6 lug wheel spacers\u003c\/a\u003e. For a different wheel pattern, see \u003ca href=\"\/collections\/wheel-adapters\"\u003ewheel adapters\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003eFree US shipping on all bolt-on spacers.\u003c\/p\u003e","products":[{"product_id":"wheel-adapters-5x4-5-to-5x4-5-with-1-2-studs","title":"5x4.5\" Wheel Spacers | Bolt-On, 1\/2\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e0.75\", 1\", 1.25\", 1.5\", 2\", 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e6061 T6 aircraft billet\u003c\/li\u003e\n\u003cli\u003ewheel bolt pattern same\u003c\/li\u003e\n\u003cli\u003eworks as wheel spacers\u003c\/li\u003e\n\u003cli\u003ewith open end lug nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWheel adapters 5x4.5 to 5x4.5 bolt pattern in 1\/2\" studs. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eThis type of adapter is used for 5 lug 4.5\" (114.3mm) bolt pattern hubs to fit 5 lug 4.5\" (114.3mm) wheels. CNC machined billet aluminum and thickness options are 1\", 1.25\", 1.5\" and 2\" . New wheel studs and lug nuts are included. These adapters can be used on the following cars, among others:\u003c\/span\u003e\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003e\u003cb\u003eFord\u003c\/b\u003e: Mustang (94-2014), Cobra (97-on), Explorer (90-on), Ranger (81-on, not the 2019-2026 Ranger, which is 6x139.7), Bronco II (82-90), Full size (Galaxie, T-Bird, etc) (57-72, not the 1972 T-Bird, which is 5x127), Probe (88-97)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003e\u003cb\u003eJeep\u003c\/b\u003e: Cherokee (80-on, not the 1980-1983 Cherokee, which is six-lug, or the 2014-2023 Cherokee, which is 5x110), Wrangler (80-06), Grand Cherokee (93-98), Liberty (02-on)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e\n\u003cspan class=\"s2\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"s3\"\u003e\u003cb\u003eDodge\u003c\/b\u003e: Grand Caravan, Caravan LE (87-on, not the 1987-1995 front-wheel-drive Caravan, which is 5x100), Dakota (87-90), Stratus (02-on, not the 2002-2006 Stratus sedan, which is 5x100), Stealth (91-96), Magnum (05-on, not the 2005-2008 Magnum, which is 5x115), Intrepid (93-on)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"li2\"\u003eIf your listed vehicle has 12x1.5 or 14x1.5 hub studs (for example the Ford Probe 1989-1997 or Explorer 2020-2026, or the Dodge Stealth 1991-1996, Grand Caravan 2001-2007 or Intrepid 1999-2004), mount the adapter with lug nuts in your hub-stud thread and the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 1\/2\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 1\/2\" \/ 73mm","offer_id":45768607007001,"sku":"5450-5450F-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 1\/2\" \/ 73mm","offer_id":45768607039769,"sku":"5450-5450F-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 1\/2\" \/ 73mm","offer_id":45768607072537,"sku":"5450-5450F-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 73mm","offer_id":45768607105305,"sku":"5450-5450F-20","price":84.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 1\/2\" \/ 73mm","offer_id":48123324137753,"sku":"5450-5450F-30","price":89.95,"currency_code":"USD","in_stock":true},{"title":"0.75\" \/ 1\/2\" \/ 73mm","offer_id":48123324170521,"sku":"5450-5450F-075","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_75b4cc41-34d9-4528-99d9-93d87fe997c3.png?v=1747179843"},{"product_id":"hub-centric-wheel-adapter-5-lug-100-toyota-scion-pair","title":"5x100 Hub Centric Wheel Spacers | Bolt-On, 54.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e54.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eThese hub centric adapters are used for 5 lug 100mm bolt pattern with 54.1mm hub to fit 5 lug 100mm factory wheels (54.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.5 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLexus: ES 250 (90-91)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePontiac: Vibe 1.8L (03-10)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eScion: TC (05-08), XD (08)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eToyota: Camry (83-91), Celica (86-05, not the 1986-1993 base model, which is 4x100), Corolla (03-08), Corolla sedan (09-26, US models), Corona (91-97), Matrix (03-08), Matrix 1.8L (09-13), Prius (04-22, not Prius v or Prius c)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e5-lug 5x100mm hub side to 5x100mm wheel side\u003c\/li\u003e\n\u003cli\u003eHub centric design for a centered, balanced fit\u003c\/li\u003e\n\u003cli\u003eMatching pattern in and out, so this set pushes the wheels outward to add track width\u003c\/li\u003e\n\u003cli\u003eFits the Toyota and Scion applications listed in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount each adapter on a clean hub and seat it flat before torquing to your vehicle's factory specification. If your factory studs protrude past the adapter face they must be shortened so the wheel seats flush. Use the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat against a clean hub, are torqued to spec with full stud and thread engagement, and are re-torqued after the first 50 to 100 miles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. They keep the same 5x100mm pattern on both sides and simply add track width for a wider, more planted stance.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x100mm-hub-wheel-adapters\"\u003e5x100 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 54.1mm","offer_id":47734609543449,"sku":"5100-5100HL-10","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_792fea3c-80a6-477d-915d-752e2e08d318.png?v=1708041961"},{"product_id":"hub-centric-wheel-adapter-5-lug-100-subaru-pair","title":"5x100 Hub Centric Wheel Spacers | Bolt-On, 56.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e56.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 100mm bolt pattern Subaru models Baja, Impreza (not for WRX STI Sedan 05-07), Forester, Legacy, Outback with 56.1mm hub to fit 5 lug 100mm factory wheels (56.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.25 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSubaru\u003c\/strong\u003e: Baja (03-06), Impreza (Base) (93-04), Impreza Wrx Sport Wagon, TR Sedean (02-07), Impreza 2.5i, Outback Sport, Wrx (2008), Forester L, S, 2.5x, 2.5xt (98-08), Forester (US, 09-18), Legacy (90-14), Outback (95-14), Impreza (09-23, not WRX STI), WRX (09-14), Crosstrek (13-23), BRZ (13-20, 22-26)\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScion\u003c\/strong\u003e: FR-S (13-16)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eToyota\u003c\/strong\u003e: 86 (17-20), GR86 (22-23)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSaab\u003c\/strong\u003e: 9-2X (05-06)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x100mm-hub-wheel-adapters\"\u003e5x100 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.25","offer_id":47734609117465,"sku":"5100-5100HS-10","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01.png?v=1708041954"},{"product_id":"wheel-adapter-5x112-to-5x112-pair","title":"5x112 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x112mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x112mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\nThese adapters are used for 5 lug 112mm bolt pattern hub to fit 5 lug 112mm Mercedes wheels. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. Center bore is 66.5mm. Studs 14x1.5 thread size.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our premium quality adapters ensure durability and strength. Price is for a pair (2 adapters).\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\n\u003cp\u003eOn vehicles with lug bolts, use hub-side lug bolts in the vehicle's required thread and the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads, flush seating and clearance from brake or other components.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x112mm-hub-wheel-adapters\"\u003e5x112 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 14x1.5 \/ 66.56mm","offer_id":47734606823705,"sku":"5112-5112R-125","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_0d9f0a17-2e14-4ed6-9804-bb6cc7f4a20e.png?v=1711517674"},{"product_id":"hub-centric-wheel-adapter-5-lug-115-to-5-lug-115-pair","title":"5x115 Hub Centric Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e71.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of hub centric adapter is used for both 5 lug 115mm bolt pattern cars to fit 5 lug 115mm bolt pattern wheels. Center bore is 71.5mm. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Charger (06-on), Challenger (08-23), Magnum (05-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChrysler\u003c\/strong\u003e: 300, 300C\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensure durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e5x115mm hub side to 5x115mm wheel side\u003c\/li\u003e\n\u003cli\u003eHub centric build to help prevent vibration from an off-center fit\u003c\/li\u003e\n\u003cli\u003eSame pattern on both faces, so it works as a spacer that widens track\u003c\/li\u003e\n\u003cli\u003eFits the applications shown in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstall each piece against a clean hub, make sure it sits flat, then torque to your vehicle's factory specification. If factory studs protrude past the adapter face, shorten them so the wheel seats flush. Refer to the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes. With a flat seat on a clean hub, correct torque to spec, full stud and thread engagement, and a re-torque after the first 50 to 100 miles, they hold securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does this set actually do?\u003c\/strong\u003e\u003cbr\u003eIt keeps your 5x115mm pattern unchanged and pushes each wheel outward to add track width and fill the wheel well.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x115mm-hub-wheel-adapters\"\u003e5x115 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 71.5mm","offer_id":47734606758169,"sku":"5115-5115HC-10","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_81ee1ccd-0247-40ed-acbe-1906e3ebcb30.png?v=1708041973"},{"product_id":"wheel-adapter-5-lug-120-to-5-lug-120-pair","title":"5x120 Wheel Spacers | Bolt-On, 72.56mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e72.56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1.25\", 1.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eThis type of adapter is used for 5 lug 120 bolt pattern cars to fit 5 lug 120 bolt pattern wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included. Studs size 14x1.5.\u003cbr\u003e\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cp align=\"left\"\u003e\u003cspan\u003eLand Rover:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eDiscovery II (99-04), Discovery 4.6 (99-04), LR3 (05-on)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRange Rover: \u003c\/span\u003e\u003cspan\u003eRange Rover P38 (95-02), Range Rover (06-on)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBMW: All 5 Lug with 72.56mm bore (BMWs use lug bolts in 12x1.5, 14x1.25 or 14x1.5: mount the adapter with hub-side lug bolts in your BMW's thread and the adapter's required seat, bought separately; lug bolts are not included)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAcura: TL (09-14), RL (05-12), RLX (14-20), MDX (07-13, 17-20, 22-24), TLX (21-25), Integra Type S (24-26)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCadillac: CTS (08-19), CTS-V (09-19), ATS-V (16-19), CT4-V Blackwing (22-25), CT5 (20-26), CT6 (16-20), XTS (13-19), XT4 (19-25)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eChevrolet: Camaro (10-24), Caprice PPV (11-17), Corvette (20-22), Equinox (10-17), Impala (14-20, not the 14-16 Impala Limited), Malibu (13-15), SS (14-17)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHonda: Civic Type R (17-21, 23-26), Odyssey (05-26), Passport (19-26), Pilot (09-26), Ridgeline (06-14, 17-26)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePontiac: G8 (08-09)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSaab: 9-5 (10-11; requires hub-side M14x1.5 lug bolts in the adapter's required seat, bought separately; lug bolts not included; confirm full thread engagement, fully recessed heads and flush seating)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to your 5x120mm hub and keeps the same 5x120mm pattern on the wheel side\u003c\/li\u003e\n\u003cli\u003eSame-pattern design works as a bolt-on spacer that adds track width\u003c\/li\u003e\n\u003cli\u003eCNC machined billet aluminum\u003c\/li\u003e\n\u003cli\u003eNew 14x1.5 wheel studs and lug nuts included\u003c\/li\u003e\n\u003cli\u003eFits BMW 5 lug hubs with a 72.56mm bore, plus the Acura, Cadillac, Chevrolet, Honda, Pontiac and Saab models listed in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTorque the adapters to the hub first, then hang the wheel and torque the included lug nuts to spec. Values are in our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque everything after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhy run an adapter with the same pattern on both sides?\u003c\/strong\u003e\u003cbr\u003eIt does the job of a spacer. Each wheel sits outboard by the adapter's thickness for a wider stance, and you get fresh studs and lug nuts instead of reusing worn hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, installed correctly. Seat the adapter flat on the hub, torque every fastener to spec with full thread engagement, and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x120mm-hub-wheel-adapters\"\u003e5x120 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 14x1.5 \/ 72.56mm","offer_id":48118111830297,"sku":"5120-5120E-125","price":70.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 72.56mm","offer_id":48118111863065,"sku":"5120-5120E-15","price":75.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_75b4cc41-34d9-4528-99d9-93d87fe997c3.png?v=1747179843"},{"product_id":"wheel-adapter-5x100-to-5x100-pair","title":"5x100 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e57.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 100 bolt pattern cars to fit 5 lug 100mm bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eThese adapters can be used on the following cars, among others:\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eBuick\u003c\/strong\u003e: Century (80-89), Skyhawk (81-on), Skylark (81-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevrolet\u003c\/strong\u003e: Cavilier (80-on), Beretta (87-on), Celebrity (80-89), Citation (80-86), Corsica (87-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChrysler: \u003c\/strong\u003ePT Cruiser (00-on), Cirrus (95-97), Laser, GTS (86-89, 5x100 hubs only), Lebaron (85-on, 5x100 hubs only), New Yorker (85-93), Sebring Convertible, JX (96-on, not the 2007-2010 Sebring, which is 5x114.3), Town \u0026amp; Country Van (86-96, not the 1990-1996 Town \u0026amp; Country, which is 5x114.3)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge: \u003c\/strong\u003eCaravan (86-96, not the 1987-1995 AWD Caravan, which is 5x114.3), Aries (86-89), Daytona (85-93), Dynasty (88-93), Lancer (85-89), Lancer Turbo (86-89), Neon (94-on), Spirit (89-95), Stratus (95-on, not the 2001-2005 Stratus Coupe, which is 5x114.3)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLexus: \u003c\/strong\u003eES 250 (90-91)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOldsmobile: \u003c\/strong\u003eCutlass, Calais, Ciera (82-91), Achieva (92-on), Firenza (82-88), Omega (80-85)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePlymouth: \u003c\/strong\u003eVoyager (86-96), Acclaim (89-95), Breeze (96-on), Caravelle (85-89), Neon (96-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePontiac: \u003c\/strong\u003eGrand AM (85-98), Sunbird (85-97), Vibe (03-on, not the 2009-2010 Vibe 2.4 or AWD, which is 5x114.3), 6000 (82-89, 5x100 hubs only), Fiero (84-88)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSubaru: \u003c\/strong\u003eBaja\u003cstrong data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e(03-on), Impreza (93-on, not the 2024-2026 Impreza or the 2005-2021 WRX STI, which are 5x114.3), Impreza WRX (02-on, not the 2015-2026 WRX or the 2005-2021 WRX STI, which are 5x114.3), Forester (98-on, not the 2019-2026 Forester, which is 5x114.3), Legacy, Outback (90-on, not the 2015-2025 Legacy or the 2015-2026 Outback, which are 5x114.3)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eToyota: \u003c\/strong\u003eCamry (83-91), Celica (86-96, 00-on, not the 1986-1993 base model, which is 4x100), Corolla (03-on, 5x100 hubs only), Matrix (03-on, not the 2009 or 2013 Matrix 2.4L, which is 5x114.3)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eVolkswagon\u003c\/strong\u003e: Beetle Coupe (98-08), Corrado (93-94), Golf (99-06; on a 1999 model, confirm 5x100 before ordering), GTI (99-05), Jetta (93-04, not the 1993-1998 four-cylinder Jetta, which is 4x100; on a 1999 model, confirm 5x100 before ordering), Passat (90-97, 5x100 hubs only)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed vehicle has 12x1.25 hub studs (for example the Subaru Impreza 1993-2023, Forester 1998-2018, Legacy 1990-2014, Outback 1995-2014 or WRX 2002-2014), mount the adapter with 12x1.25 lug nuts in the adapter's required seat, bought separately; the adapter's own studs are 12x1.5. On a listed vehicle that uses lug bolts, mount the adapter with hub-side lug bolts in the vehicle's thread and the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads and flush seating. Examples using 14x1.5 lug bolts are the Volkswagen Mk4 Golf 1999-2006, GTI 1999-2005 and Mk4 Jetta 1999-2004.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to a 5x100mm hub\u003c\/li\u003e\n\u003cli\u003eKeeps the same 5x100mm wheel pattern\u003c\/li\u003e\n\u003cli\u003eIdentical pattern in and out, so it adds track width\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith matching 5x100mm patterns on both sides, this pushes the wheel outward to widen your track without altering the bolt pattern. Bed each one flat on a clean hub, torque the hardware to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after the first 50 to 100 miles. Trim any factory studs that poke past the adapter face so the wheel seats flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, as long as they sit flat against the hub, keep full stud and thread engagement, and are torqued to spec and re-torqued after the first 50 to 100 miles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a same-pattern adapter do?\u003c\/strong\u003e\u003cbr\u003eIt works as a spacer, adding track width for better clearance or a wider stance while keeping your 5x100mm pattern.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x100mm-hub-wheel-adapters\"\u003e5x100 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 57.1mm","offer_id":46073194021145,"sku":"5100-5100M-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 57.1mm","offer_id":49145816023321,"sku":"5100-5100M-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 12x1.5 \/ 57.1mm","offer_id":49145816056089,"sku":"5100-5100M-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 12x1.5 \/ 57.1mm","offer_id":49145816088857,"sku":"5100-5100M-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_d7a9aab5-b7da-4bdb-961f-90ae97870764.png?v=1708105625"},{"product_id":"hub-centric-wheel-adapter-5x120-bmw-pair","title":"5x120 Hub Centric Wheel Spacers | Bolt-On, 72.6mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 120mm bolt pattern BMW hub of 72.56mm to fit 5 lug 120mm BMW factory wheels with 72.56mm bore. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub as well as the wheel side.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThey fit the following models with factory hub height no more than 20mm\u003c\/strong\u003e (see the way to measure in the diagram below).\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensure durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003eOn vehicles with lug bolts, use hub-side lug bolts in the vehicle's required thread and the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads, flush seating and clearance from brake or other components.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x120mm-hub-wheel-adapters\"\u003e5x120 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 72.6mm","offer_id":47734605414681,"sku":"5120-5120HB-10","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_d4732267-9e05-4e18-ac06-ec2d9e05e484.png?v=1708042307"},{"product_id":"wheel-adapter-5x120-to-5x120-pair","title":"5x120 Wheel Spacers | Bolt-On, 67.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e67.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 120 bolt pattern cars to fit 5 lug 120 bolt pattern wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included. Studs size 14x1.5.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevy:\u003c\/strong\u003e Camaro (2010-on), Caprice PPV (11-17), Corvette (20-22), Equinox (10-17), Impala (14-20, not the 14-16 Impala Limited), Malibu (13-15), SS (14-17)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAcura\u003c\/strong\u003e: MDX (07-on, not the 2014-2016 MDX, which is 5x114.3), TL (09-14), RL (05-12), RLX (14-20), TLX (21-25), Integra Type S (24-26)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHonda:\u003c\/strong\u003e Ridgeline (06-on), Pilot (09-on), Civic Type R (17-21, 23-26), Odyssey (05-26), Passport (19-26)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCadillac:\u003c\/strong\u003e CTS (08-19), CTS-V (09-19), ATS-V (16-19), CT4-V Blackwing (22-25), CT5 (20-26), CT6 (16-20), XTS (13-19), XT4 (19-25)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePontiac:\u003c\/strong\u003e G8 (08-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSaab:\u003c\/strong\u003e 9-5 (10-11; requires hub-side M14x1.5 lug bolts in the adapter's required seat, bought separately; lug bolts not included; confirm full thread engagement, fully recessed heads and flush seating)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x120mm-hub-wheel-adapters\"\u003e5x120 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 67.1mm","offer_id":47734604398873,"sku":"5120-5120M-10","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_59b3315d-7fa6-4bc7-92b9-50cef8a57b22.png?v=1711517469"},{"product_id":"wheel-adapter-5x130-to-5x130-pair","title":"5x130 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e71.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 130mm bolt pattern Porsche 911, 924, 930, 944, Caynne to space out wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\nOur premium quality adapters ensures durability and strength. Price is for a pair (2 pieces)..\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x130mm-hub-wheel-adapters\"\u003e5x130 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 14x1.5 \/ 71.5mm","offer_id":47734603743513,"sku":"5130-5130X-125","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_dc6cd1b2-37b2-4e3b-9f70-0fae60fed29d.png?v=1708105713"},{"product_id":"wheel-adapter-5-lug-4-to-5-lug-4-pair","title":"5x4\" Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4\" (5x101.6mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4\" (5x101.6mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4\" (101.6mm) bolt pattern cars to fit 5 lug 4\" (101.6mm) bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Dart, Demon, Swinger (w\/o disc brakes) (63-72)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePlymouth\u003c\/strong\u003e: Barracuda, Cuda, Duster, Valiant (63-72); Scamp, Duster, Valiant (w\/o disc brakes) (71-75)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensure durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo avoid common mistake in bolt pattern measurement, please review\u003ca rel=\"noopener\" data-mce-fragment=\"1\" href=\"https:\/\/ezaccessory.com\/pages\/how-to-measure-wheel-adapter-bolt-patterns\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e How To Correctly Measure Bolt Pattern.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view torque reference document \u003ca rel=\"noopener\" data-mce-fragment=\"1\" href=\"https:\/\/ezaccessory.com\/pages\/torque-reference\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTorque Reference\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-101-6mm-hub-wheel-adapters\"\u003e5x4\" (5x101.6) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 73mm","offer_id":47734600892697,"sku":"5400-5400L-10","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_8789af92-c31e-406f-94fd-14775229999b.png?v=1708105174"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-5-honda-acura-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 64.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e64.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eThese hub centric adapters are used for 5 lug 4.5\" (114.3mm) bolt pattern for Acura CL (not the 4-lug 1997-1999 CL), TL (not the 4-lug 2.5TL or the 2009-2014 TL, which is 5x120), RSX, NSX (rear axle, not the 2017-2022 NSX, which is 5x120), 3.5RL (96-04), CSX (06-11), ILX (13-22), Integra Type R (97-01), Integra (23-26, not Type S), MDX (01-06, 14-16), RDX (07-24), TLX (15-20), TSX (04-14) and Honda Accord (5 lug), S2000 (not the front axle on 2000-2009 models), Civic (5 lug, not the 2017-2021 or 2023-2026 Type R, which is 5x120), CRV, CR-Z (11-16), Clarity (17-21), Crosstour (10-15), Element, HR-V (16-26), Insight (19-22), Odyssey (not the 2005-2026 Odyssey, which is 5x120), Pilot (03-08), Prelude (not the 1992-1996 Prelude, which is 4x114.3, or the 2026 Prelude, which is 5x120) with 64.1mm hub to fit 5 lug 4.5\" (114.3mm) factory wheels (64.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.5 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cp\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 64.1mm","offer_id":47734597943577,"sku":"5450-5450HA-10","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_2ae1e3db-2c0f-4dec-b90a-6fa822da65f1.png?v=1708041984"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-5-lexus-toyota-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 60.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e60.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 4.5\" (114.3mm) bolt pattern for all Lexus (except ES 250, LS 460, LS HL), Toyota Avalon, Camry (92-on), Solara, MR2 (90-95), Supra (87-on), RAV4 (96-26), Highlander (01-26), Sienna (98-26), Previa (91-97), Tacoma 2WD 5 lug (05-15), C-HR (18-22), Corolla Cross (22-26), Corolla iM (17-18), Cressida (89-92), Mirai (16-20), Prius v (12-17), Venza (09-15, 21-22) with 60.1mm hub to fit 5 lug 4.5\" (114.3mm) factory wheels (60.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.5 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 60.1mm","offer_id":47734597878041,"sku":"5450-5450HL-10","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_03a6d9c9-06af-4e02-9e9d-1ec83e2297fe.png?v=1708041995"},{"product_id":"hub-centric-wheel-adapter-5-lug-114-3-subaru-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 56.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e56.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp class=\"eza-dualname\"\u003e5x4.5\" bolt-on wheel spacer, also sold as a same-pattern wheel adapter.\u003c\/p\u003e\n\u003cp class=\"eza-formerly\"\u003e\u003csmall\u003eFormerly sold as: Hub Centric Wheel Adapter 5x4.5 For Subaru 56.1mm (Pair) · SKU 5450-5450HW-10\u003c\/small\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric spacers are used for 5 lug 114.3mm bolt pattern Subaru models Impreza WRX STI Sedan 05-07, WRX STI 08-21, WRX 15-26, Forester 19-26, Outback 15-26, Legacy 15-25, Crosstrek 24-26, SVX 92-97, TRIBECA 06-08 with 56.1mm hub to fit 5 lug 114.3mm factory wheels (56.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.25 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacers ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the spacer and prevent the wheels to sit flush on the spacer plates, it is required to shorten the factory studs. It happens most often on 1\" thick spacers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eFits 5x4.5\" (5x114.3mm) Subaru models with a 56.1mm hub bore: Impreza WRX STI Sedan 05-07, WRX STI 08-21, WRX 15-26, Forester 19-26, Outback 15-26, Legacy 15-25, Crosstrek 24-26, SVX 92-97, Tribeca 06-08\u003c\/li\u003e\n\u003cli\u003eHub centric design matched to factory wheels with a 56.1mm bore\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003ePre-installed 12x1.25 thread wheel studs and new open end lug nuts included\u003c\/li\u003e\n\u003cli\u003eSold as a pair (2 spacers); free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean the hub face, seat the spacer flat, and torque the spacer nuts and wheel lug nuts to the values in our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-torque after the first 50 to 100 miles. If the factory studs stick out past the spacer face, most common on 1\" thick spacers, shorten them so the wheel sits flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. The pattern stays 5x114.3mm on both sides, so these work as spacers: your factory Subaru wheels bolt back on, just moved outward for added track width.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel spacers safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed properly. Seat the spacer flat on the hub, torque everything to spec, re-torque after the first 50 to 100 miles, and confirm the lug nuts get full thread engagement on the studs.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/bolt-on-wheel-spacers\"\u003ebolt-on wheel spacers\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-wheel-spacers\"\u003e5 lug wheel spacers\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.25 \/ 56.1mm","offer_id":47734597845273,"sku":"5450-5450HW-10","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_cda0b0db-3b92-4e2b-ba66-00fd0b5357fc.png?v=1708041967"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-75-jaguar-pair","title":"5x4.75\" Hub Centric Wheel Spacers | Bolt-On, 74mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 4.75\" (120.7mm) bolt pattern cars with 74.1mm hub to fit 5 lug 4.75\" (120.7mm) wheels with 74.1mm bore. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They fit the following hub:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJaguar\u003c\/strong\u003e: XJ, XK All Models (69-03), XJ, XJ8, XJ8L, Vandan Plas (91-03), XKR (00-06)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-75-120-6mm-hub-hub-wheel-adapters\"\u003e5x4.75\" (5x120.65) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 1\/2\" \/ 74mm","offer_id":47734594470169,"sku":"5475-5475HG-125","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_b62101a3-6dcc-4ffe-ba71-e4cb7ef56950.png?v=1708042197"},{"product_id":"wheel-adapter-5-lug-4-75-to-5-lug-4-75-jaguar-pair","title":"5x4.75\" Wheel Spacers | Bolt-On, 1\/2\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e74.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4.75\" (120.7mm) bolt pattern cars to fit 5 lug 4.75\" (120.7mm) wheels. CNC machined billet aluminum and thickness options are 1.25\". New 1\/2\" thread size wheel studs and lug nuts are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJaguar\u003c\/strong\u003e: XJ, XK All Models (69-03), XJ, XJ8, XJ8L, Vandan Plas (91-03), XKR (00-06)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-75-120-6mm-hub-hub-wheel-adapters\"\u003e5x4.75\" (5x120.65) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 1\/2\" \/ 74.1mm","offer_id":47734594404633,"sku":"5475-5475U-125","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_b237834b-54b5-4e12-b105-62f7b9619726.png?v=1708105367"},{"product_id":"hub-centric-wheel-adapter-5-lug-5-5-to-5-lug-5-5-pair","title":"5x5.5\" Hub Centric Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of hub centric adapter is used for both 5 lug 5.5\" (139.7mm) bolt pattern cars to fit 5 lug 5.5\" (139.7mm) bolt pattern wheels. Center bore is 78mm. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Dakota (05-2011), Durango (04-2011, not the 2011 Durango, which is 5x127), Ram 1500 New Body 2\/4WD (02-2011)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e5x5.5\" (139.7mm) on both sides, so it works as a bolt-on spacer that adds track width\u003c\/li\u003e\n\u003cli\u003eHub centric design with a 78mm center bore\u003c\/li\u003e\n\u003cli\u003eCNC machined billet aluminum\u003c\/li\u003e\n\u003cli\u003eNew wheel studs and lug nuts included\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTorque the adapter to the hub with the supplied hardware, then torque the wheel onto the adapter studs, using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e for values. If the factory studs stick out past the adapter face, shorten them so the wheel sits flush. Re-torque both sets after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy an adapter with the same bolt pattern on both sides?\u003c\/strong\u003e\u003cbr\u003eIt functions as a spacer. Your 5x5.5 wheels bolt right back on, just pushed outward for extra clearance or a wider stance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed correctly. Seat the plate flat on the hub, torque to spec, confirm full thread engagement on every stud, and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-5-139-7mm-hub-hub-wheel-adapters\"\u003e5x5.5\" (5x139.7) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"2\" \/ 9\/16\" \/ 77.8mm","offer_id":47734587851033,"sku":"5550-5550HG-20","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_aebdc651-7735-44e8-9d8c-264d2cf305cb.png?v=1708042234"},{"product_id":"wheel-adapter-5-lug-6-5-to-5-lug-6-5-pair","title":"5x6.5\" Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x6.5\" (5x165.1mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x6.5\" (5x165.1mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e120.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e16x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 6.5\" bolt pattern cars to fit 5 lug 6.5\" bolt pattern wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included. Studs size 16x1.5.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLand Rover\/Range Rover:\u003c\/strong\u003eDefender (before 1999), Discovery(before 1999), Range Rover (before 1999)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to a 5x6.5\" (5x165.1mm) hub\u003c\/li\u003e\n\u003cli\u003eKeeps the same 5x6.5\" (5x165.1mm) wheel pattern\u003c\/li\u003e\n\u003cli\u003eSame pattern in and out, so it adds track width\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the hub and wheel patterns match, this spaces the wheel away from the hub to widen your stance without changing the bolt pattern. Seat each one flat on a clean hub, torque the hardware to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after the first 50 to 100 miles. If factory studs reach past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, provided they sit flat against the hub, have full stud and thread engagement, and are torqued to spec then re-torqued after the first 50 to 100 miles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. It keeps your 5x6.5\" pattern and simply adds track width for clearance or a wider look.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x6-5-165mm-hub-wheel-adapters\"\u003e5x6.5\" (5x165.1) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.5\" \/ 16x1.5 \/ 120.6mm","offer_id":47734587523353,"sku":"5650-5650C-15","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_f9e4d62c-ed02-411f-923a-870211154530.png?v=1711517135"},{"product_id":"wheel-adapter-5-lug-4-5-to-5-lug-4-5-pair-12x1-5","title":"5x4.5\" Wheel Spacers | Bolt-On, 12x1.5 Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e0.75\", 1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4.5\" (114.3mm) bolt pattern hubs to fit 5 lug 4.5\" (114.3mm) wheels. CNC machined billet aluminum and thickness options are 1\", 1.25\", 1.5\" and 2\" . New wheel studs and lug nuts are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAcura\u003c\/strong\u003e: 3.2 CL V-6 (98-on), Legend (91-on), RSX (01-on), NSX (91-on, not the 2017-2022 NSX, which is 5x120), TL 3.2 (96-08), MDX (01-06), RL (96-04)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChrysler\u003c\/strong\u003e: 300C (05-on, not the 2005-2023 300C, which is 5x115), 300M (98-on), Sebring LXI (95-on), Town \u0026amp; County Van\/Voyager (88-on), Full size (Cordoba, Mirada, etc) (68-87)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Escape (01-12)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHonda\u003c\/strong\u003e: Accord (03-on), Accord V-6 (98-on), S2000 (99-on), Pilot (03-08), Element (03-on), CR-V (97-on), Odyssey (95-04)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eHyundai\u003c\/strong\u003e: Tiburon (00-on, not the 2000-2001 Tiburon, which is 4x114.3), XG 300\/350 (01-on), Santa Fe (01-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInfiniti\u003c\/strong\u003e: G35 (03-on), I30 (95-97), J30 (92-97), M45 (03-on), Q45 (90-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep\u003c\/strong\u003e: Compass (07-on, not the second-generation Compass of 2017-2026, which is 5x110), Patriot (07-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLexus\u003c\/strong\u003e: All except ES250 (not including SUV), RX300 (98-03), RX330 (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMazda\u003c\/strong\u003e: 626 (88-on), 929 (88-on), MPV (89-on), Tribute (01-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMitsubishi\u003c\/strong\u003e: Eclipse (89-on), Galant (97-on), 3000, GT, SL (91-97), Starion, Turbo (86-89), Outlander (03-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNissan\u003c\/strong\u003e: Altima (02-on), Maxima (89-on), 240SX (95-96, not the 1995-1996 base model, which is 4x114.3), 300ZX, Turbo (84-96, not the 1984-1985 non-turbo 300ZX, which is 4x114.3), 350Z (03-on), Murano (03-on), Quest (93-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eToyota\u003c\/strong\u003e: Avalon (95-on), Camry (92-on), Solara (99-on), MR-2 (90-95), Highlander (01-on), Rav4 (96-on), Sienna (97-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eKia\u003c\/strong\u003e: Sorento (11-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed vehicle has 12x1.25 hub studs (for example the Nissan Altima 2002-2025, Maxima 1989-2023, 350Z 2003-2009 or Murano 2003-2026, or the Infiniti G35 2003-2008 or Q45 1990-2006), mount the adapter with 12x1.25 lug nuts in the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 12x1.5.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"0.75\" \/ 12x1.5 \/ 73mm","offer_id":46074548977945,"sku":"5450-5450M-075","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1\" \/ 12x1.5 \/ 73mm","offer_id":46075182481689,"sku":"5450-5450M-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 73mm","offer_id":46075182514457,"sku":"5450-5450M-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 12x1.5 \/ 73mm","offer_id":46075182547225,"sku":"5450-5450M-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 12x1.5 \/ 73mm","offer_id":46075182579993,"sku":"5450-5450M-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_642db7a3-193f-4917-8153-dd5c2c063930.png?v=1708105355"},{"product_id":"wheel-adapter-5x110-to-5x110-pair","title":"5x110 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e65.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 110mm bolt pattern cars to fit 5 lug 110mm wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. These adapters can be used on the following cars:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCadillac: Catera (97-01)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChevrolet: Cobalt SS (05-on), HHR (06-on), Malibu (04-on, not the 2013-2015 Malibu, which is 5x120)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePontiac: G5 GT (07-on), G6 Base GT (05-on), Solstice (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSaab: 900 (94-98), 9 3 (99-on), 9 5 (99-on, not the 2010-2011 9 5, which is 5x120)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSaturn: Astra (08-09), Aura (07-09), Ion Red Line (04-07), L-Series (00-05), Sky (07-10)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor any listed vehicle that uses M12x1.5 lug bolts, including the Cadillac Catera, the Saab 900, 9 3 and 9 5 and the Saturn Astra (08-09), use hub-side M12x1.5 lug bolts in the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads and flush seating.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eJeep: Renegade (15-on). The Renegade uses M12x1.25 lug bolts: mount the adapter with hub-side M12x1.25 lug bolts in the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads and flush seating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x110mm-hub-wheel-adapters\"\u003e5x110 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 65.1mm","offer_id":46075145290009,"sku":"5110-5110B-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 65.1mm","offer_id":46148294803737,"sku":"5110-5110B-125","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_743bac4e-3ec2-463d-b8d2-51219c658039.png?v=1708105659"},{"product_id":"wheel-adapter-5x115-to-5x115-pair","title":"5x115 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x115mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e0.75\", 1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 115mm bolt pattern cars to fit 5 lug 115mm wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. These adapters can be used on the following cars\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChrysler: 300 (05-23), 300C (05-23), 300S (12-23)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDodge: Charger (06-on), Challenger (08-23), Magnum (05-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x115mm-hub-wheel-adapters\"\u003e5x115 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"0.75\" \/ 14x1.5 \/ 73.1mm","offer_id":46075147059481,"sku":"5115-5115X-075","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1\" \/ 14x1.5 \/ 73.1mm","offer_id":46148307681561,"sku":"5115-5115X-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 14x1.5 \/ 73.1mm","offer_id":46148307714329,"sku":"5115-5115X-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 73.1mm","offer_id":46148307779865,"sku":"5115-5115X-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 73.1mm","offer_id":46148307812633,"sku":"5115-5115X-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_ce5c1753-6c24-49ab-9876-3910e466a9ac.png?v=1711517278"},{"product_id":"hub-centric-wheel-adapter-5-lug-135-to-5-lug-135-pair","title":"5x135 Hub Centric Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e87.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapter is used for 5 lug 135mm bolt pattern cars to fit 5 lug 135mm bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Expedition (97-02), F150 Truck (97-04, not the 2004 new-body F-150)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLincoln\u003c\/strong\u003e: Blackwood (01-02), Navigator (97-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed truck has 12x1.75 hub studs (for example the Ford F-150 1997-1999 or Expedition 1997-1999), mount the adapter with 12x1.75 lug nuts in the adapter's required seat, bought separately; the adapter's own studs are 14x2.0.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x135mm-hub-wheel-adapters\"\u003e5x135 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x2.0 \/ 87.1mm","offer_id":46075158102297,"sku":"5135-5135HX-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x2.0 \/ 87.1mm","offer_id":46075158135065,"sku":"5135-5135HX-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x2.0 \/ 87.1mm","offer_id":46075158167833,"sku":"5135-5135HX-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_2417ad1f-e99f-4217-82c4-130886ad09d1.png?v=1708041978"},{"product_id":"wheel-adapter-5-lug-135-to-5-lug-135-pair","title":"5x135 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x135mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e87.2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 135mm bolt pattern cars to fit 5 lug 135mm bolt pattern wheels. CNC machined billet aluminum and thickness options are 1\", 1.5\" and 2\". New wheel studs are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Expedition (97-on, not the 2003-2026 Expedition, which is 6x135), F150 Truck (97-04, not the 2004 new-body F-150)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLincoln\u003c\/strong\u003e: Blackwood (01-02), Navigator (97-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed truck has 12x1.75 hub studs (for example the Ford F-150 1997-1999 or Expedition 1997-1999), mount the adapter with 12x1.75 lug nuts in the adapter's required seat, bought separately; the adapter's own studs are 14x2.0.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x135mm-hub-wheel-adapters\"\u003e5x135 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x2.0 \/ 87.2mm","offer_id":46075158495513,"sku":"5135-5135T-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x2.0 \/ 87.2mm","offer_id":46075158528281,"sku":"5135-5135T-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x2.0 \/ 87.2mm","offer_id":46075158561049,"sku":"5135-5135T-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_3d67d064-3d65-4631-a5cd-e3ca67bd9536.png?v=1708105165"},{"product_id":"hub-centric-wheel-adapter-5-lug-toyota-tundra-pair","title":"5x150 Hub Centric Wheel Spacers | Bolt-On, Toyota Tundra (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e110mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 150mm bolt pattern with 110mm hub to fit factory wheels (110mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 14x1.5 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eToyota\u003c\/strong\u003e: Tundra 5 Lug (07-on), Land Cruiser (98-21)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x150mm, vehicle side and wheel side\u003c\/li\u003e\n\u003cli\u003eHub centric with a 110mm bore, matched to Toyota factory wheels\u003c\/li\u003e\n\u003cli\u003eFits Toyota Tundra 5 lug, 2007 and newer, and Land Cruiser 1998-2021\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003e14x1.5 thread wheel studs pre-installed, open end lug nuts included\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your Tundra's 5x150mm hubs, and because the wheel side carries the same pattern they work as spacers, adding track width while keeping your factory wheels. Torque the adapter nuts and lug nuts to spec using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after the first 50 to 100 miles. If the factory hub studs protrude past the adapter face, shorten them so the wheel sits flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed correctly: the adapter seated flat on the hub, every nut torqued to spec, a re-torque after the first 50 to 100 miles, and full thread engagement on all studs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill my factory Tundra wheels still center properly?\u003c\/strong\u003e\u003cbr\u003eYes. The 110mm hub centric bore matches the factory wheel bore, so your wheels center on the hub lip the same way they do from the factory.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"1.5\" \/ 14x1.5 \/ 110mm","offer_id":46075163738393,"sku":"5150-5150HT-15","price":89.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 110mm","offer_id":46075163771161,"sku":"5150-5150HT-20","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_26c6dbff-1dff-45d4-9bcc-fe60693926de.png?v=1708042214"},{"product_id":"wheel-adapter-5-lug-4-25-to-5-lug-4-25-pair","title":"5x4.25\" Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.25\" (5x108mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.25\" (5x108mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e70.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4.25\" (108mm) bolt pattern cars to fit 5 lug 4.25\" (108mm) bolt pattern wheels. CNC machined billet aluminum and thickness options are 1.25\". New wheel studs are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDodge: Monaco (90-92)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: T-Bird (89-97, 02-on), Taurus (86-on, not the 2008-2019 Taurus, which is 5x114.3), Windstar (94-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLincoln: Continental (88-97), LS (99-on), Mark VIII (93-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMercury: Cougar (89-97), Mystique, Sable (94-on, not the 1995-2000 Mystique, which is 4x108)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-25-108mm-hub-wheel-adapters\"\u003e5x4.25\" (5x108) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 70.7mm","offer_id":46075168555289,"sku":"5425-5425L-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 70.7mm","offer_id":46075168588057,"sku":"5425-5425L-125","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_ce2cdb30-ab19-4ec0-ad19-bb7b0118ed23.png?v=1711516599"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-5-jeep-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 71.5mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e71.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 4.5\" (114.3mm) bolt pattern with Jeep 71.5mm hub to fit 5 lug 4.5\" (114.3mm) Jeep factory wheels (71.5mm bore). CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are guaranteed to fit the following models with original wheels. If the model and year of your vehicle is not on the list, you need to check and make sure your factory hub looks similar to diagram below and the height is no more than 20mm (see the the way to measure in the diagram below).\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep\u003c\/strong\u003e: Cherokee (84-98), Grand Cherokee (93-98), Wrangler (97-05)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.5\" \/ 1\/2\" \/ 71.5mm","offer_id":46075180712217,"sku":"5450-5450HJ-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 71.5mm","offer_id":46075180744985,"sku":"5450-5450HJ-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_f663d2aa-abf2-4baf-a8ad-4af48851ed28.png?v=1708041989"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-5-nissan-infiniti-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 66.1mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e66.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eWheel studs pre-installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 4.5\" (114.3mm) bolt pattern Altima (not the 1993-2001 models), Maxima (not the 1984-1988 models), 240SX (not the 1989-1994 models or the 1995-1998 base model), 300ZX (not the 1984-1985 non-turbo models), 350Z, G35, I30, J30, M45, Q45; also Nissan 370Z (09-20), Ariya (23-26), Juke (11-17), Kicks (25-26, redesigned model only; not Kicks Play), Leaf (11-26), Murano (03-26), US NV200 (13-21), Pathfinder (13-26), Quest (93-02, 04-09, 11-17), Rogue (08-26), Rogue Select (14-15), Rogue Sport (17-22), Sentra (13-26), Sentra SE-R (07-12); Infiniti EX35 (08-12), EX37 (13), FX35 (03-12), FX37 (13), FX45 (03-08), FX50 (09-13), G25 (11-12), G37 (08-14), I35 (02-04), JX35 (13), M35 (06-10), M37 (11-13), M56 (11-13), Q40 (15), Q50 (14-22), Q60 (14-15, 17-22), Q70 (14-19), QX50 (14-17, 19-24), QX55 (22-23), QX60 (14-20, 22-23), QX70 (14-17); and Chevrolet City Express (15-18) with 66.1mm hub to fit 5 lug 4.5\" (114.3mm) factory wheels (66.1mm bore). CNC machined 6061 T6 billet aluminum. New open end lug nuts and 12x1.25 thread size pre-installed wheel studs are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x4.5\" (5x114.3mm), vehicle side and wheel side\u003c\/li\u003e\n\u003cli\u003eHub centric with a 66.1mm bore for Nissan and Infiniti factory wheels\u003c\/li\u003e\n\u003cli\u003eFits Altima (not the 1993-2001 models), Maxima (not the 1984-1988 models), 240SX (not the 1989-1994 models or the 1995-1998 base model), 300ZX (not the 1984-1985 non-turbo models), 350Z, G35, I30, J30, M45, and Q45, plus the other Nissan, Infiniti and Chevrolet City Express models listed in the description above\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003e12x1.25 thread wheel studs pre-installed, open end lug nuts included\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSince the bolt pattern is the same on both sides, these work as spacers: they bolt to your 5x4.5\" (5x114.3mm) hubs and push each wheel outward for added track width. Torque the adapter nuts and lug nuts to spec using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after the first 50 to 100 miles. If the factory hub studs protrude past the adapter face, shorten them so the wheel sits flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed correctly: seated flat against the hub, torqued to spec, re-torqued after the first 50 to 100 miles, and with full thread engagement on every stud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. Both sides are 5x4.5\" (5x114.3mm), so your factory wheels bolt right back on. The 66.1mm bore keeps the hub centric fit, and the only change is added track width.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.25 \/ 66.1mm","offer_id":46075181400345,"sku":"5450-5450HN-10","price":64.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.25 \/ 66.1mm","offer_id":46075181433113,"sku":"5450-5450HN-125","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_7775e56b-55e9-4a7f-881a-173eeabd66a3.png?v=1708042188"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-5-mustang-pair","title":"5x4.5\" Hub Centric Wheel Spacers | Bolt-On, 70.6mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"eza-dualname\"\u003e5x4.5\" bolt-on wheel spacer, also sold as a same-pattern wheel adapter.\u003c\/p\u003e\n\u003cp class=\"eza-formerly\"\u003e\u003csmall\u003eFormerly sold as: Hub Centric Wheel Adapter 5 Lug 4.5\" For Mustang 70.5mm (Pair) · SKU 5450-5450HT-10\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003eThese hub centric spacers are used for 5 lug 4.5\" (114.3mm) bolt pattern with 70.5mm hub to fit 5 lug 4.5\" (114.3mm) Ford factory wheels (70.5mm bore) with certain conditions. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.\u003c\/p\u003e\n\u003cp\u003eThey are guaranteed to fit the following models with original wheels. If the model and year of your vehicle is not on the list, you need to check and make sure your factory hub looks similar to diagram below and the height is no more than 20mm (see the the way to measure in the diagram below).\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\n\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFord\u003c\/strong\u003e: Mustang (79-14, five-lug models only), GT5000 (07-on), Shelby (05-on), Edge (07-on, not the 2011-2014 Edge, which has a 63.4mm hub), Mach I (03-04)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFord\u003c\/strong\u003e: Explorer (91-02), Ranger (93-02) \u003cstrong\u003e(due to differences in axle cap length in the front, these are for rear use only; non hub centric ones are recommended for front axle)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMercury\u003c\/strong\u003e: Mountaineer (97-02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/details\u003e\n\u003cp\u003eOur premium quality spacers ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003cp\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e**If the hub studs protrude outside the spacer and prevent the wheels to sit flush on the spacer plates, it is required to shorten the factory studs. It happens most often on 1\" thick spacers.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\n\u003csummary\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e5-lug 5x4.5\" (5x114.3mm) hub side and 5x4.5\" (5x114.3mm) wheel side\u003c\/li\u003e\n\u003cli\u003eHub centric to the 70.5mm bore for accurate centering\u003c\/li\u003e\n\u003cli\u003eMatching pattern front and back, so this pair adds track width\u003c\/li\u003e\n\u003cli\u003eFits the Mustang applications listed in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlace each spacer on a clean hub, confirm it seats flat, and torque to your vehicle's factory specification. Factory studs that reach past the spacer face should be shortened so the wheel seats flush. Use the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles. Free US shipping.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\n\u003csummary\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel spacers safe?\u003c\/strong\u003e\u003cbr\u003eYes, as long as each one is seated flat on a clean hub, torqued to spec with full stud and thread engagement, and re-torqued after the first 50 to 100 miles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. Both faces stay 5x4.5\" (5x114.3mm); the set simply widens your track for better wheel and tire clearance.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/bolt-on-wheel-spacers\"\u003ebolt-on wheel spacers\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-wheel-spacers\"\u003e5 lug wheel spacers\u003c\/a\u003e · \u003ca href=\"\/collections\/ford-wheel-spacers\"\u003eford wheel spacers\u003c\/a\u003e · \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 1\/2\" \/ 70.6mm","offer_id":46075181924633,"sku":"5450-5450HT-10","price":64.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 1\/2\" \/ 70.6mm","offer_id":46075181957401,"sku":"5450-5450HT-125","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 1\/2\" \/ 70.6mm","offer_id":46075181990169,"sku":"5450-5450HT-15","price":74.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 70.6mm","offer_id":46075182022937,"sku":"5450-5450HT-20","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_e8824860-38f5-4487-893b-b16ac7ab540c.png?v=1708042180"},{"product_id":"wheel-adapter-5-lug-4-75-to-5-lug-4-75-pair","title":"5x4.75\" Wheel Spacers | Bolt-On, 12x1.5 Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e74.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e0.75\", 1\", 1.25\", 1.5\", 2\", 2.25\", 2.5\", 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-root=\"1\" data-sheets-value=\"{\" accessory wheel adapter are used to adapt lug bolt pattern cars fit your aftermarket wheels. pattern: thickness: and sold in pairs new studs nuts included. billet aluminum finish: chrome fit: buick: all mid-size rwd riviera fwd cadillac: eldorado seville chevrolet: camaro iroc z z-28 corvette zr1 chevrolet truck cyclone typhoon years s10 s-15 blazer jimmy sonoma mid size isuzu: hombre oldsmobile: f85 etc pontiac: prix gto lemans trans am phoenix if the hub protrude outside prevent wheels sit flush on plates it is required shorten factory studs. happens most often thick adapters. we recommend that should make at least seven turns or until secured perform a periodic check ensure they torqued accordingly. our application guide page will answer of fitment questions data-sheets-userformat='{\"2\":1053633,\"3\":{\"1\":0},\"9\":0,\"10\":2,\"11\":4,\"12\":0,\"15\":\"Proxima Nova\",\"23\":1}' data-sheets-textstyleruns='{\"1\":0,\"2\":{\"5\":1,\"9\":1}}{\"1\":13}{\"1\":156,\"2\":{\"5\":1,\"9\":1}}{\"1\":170}{\"1\":328,\"2\":{\"5\":1,\"9\":1}}{\"1\":338}{\"1\":341,\"2\":{\"2\":{\"1\":2,\"2\":8724492},\"5\":1,\"6\":1}}{\"1\":351,\"2\":{\"2\":{\"1\":2,\"2\":8724492},\"6\":1}}{\"1\":352}{\"1\":386,\"2\":{\"5\":1,\"9\":1}}{\"1\":398}{\"1\":909,\"2\":{\"5\":1,\"9\":1}}{\"1\":915}{\"1\":1289,\"2\":{\"2\":{\"1\":2,\"2\":1136076},\"9\":1}}{\"1\":1311}' data-sheets-hyperlinkruns='{\"1\":1289,\"2\":\"https:\/\/ezaccessory.com\/pages\/wheel-thread-size-bolt-pattern-reference\"}{\"1\":1311}'\u003e\u003cspan\u003eThese EZAccessory wheel adapters are for 5 lug 4.75\" (120.7mm) bolt pattern cars to fit aftermarket 5 lug 4.75\" (120.7mm) wheels.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e+ Thickness Options: 1\", 1.25\", 1.5\", 2\", 2.25\", 2.5\" and 3\"\u003cbr\u003e+ New wheel studs and lug nuts are included.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMaterial\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e+ \u003c\/span\u003e\u003cspan\u003eT6 6061 \u003c\/span\u003e\u003cspan\u003eBillet Aluminum\u003cbr\u003e+ Finish: Chrome\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eVehicle Fit\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e+ Buick: All Mid-Size RWD (64-88), Riviera FWD (79-85)\u003cbr\u003e+ Cadillac: Eldorado (79-85), Seville (80-85), XLR (04-09)\u003cbr\u003e+ Chevrolet: Camaro (82-09), Iroc Z (85-92), Camaro Z-28 (93-09), Corvette ZR1 (91-19), Corvette (84-19, all models)\u003cbr\u003e+ Chevrolet Truck\/Van\/SUV: Cyclone, Typhoon (All years), S10, S-15 Blazer, Jimmy, Sonoma 2x4 Mid Size (82-on), Sonoma 4x4 Mid Size (83-on), S10 Blazer (83-94), Blazer (95-05)\u003cbr\u003e+ GMC: Envoy (98-00)\u003cbr\u003e+ Isuzu: Hombre (96)\u003cbr\u003e+ Oldsmobile: All Mid-Size RWD (Cutlass, F85, 442, etc) (65-87)\u003cbr\u003e+ Pontiac: All Mid Size (Grand Prix, GTO, Lemans, etc) (64-87, not the 1964-1968 Grand Prix), Trans Am (67-97), Phoenix (85), Bonneville (82-86), Firebird (82-02), Trans Am (98-02) (for rear fitment on either model, measure the rear pilot first and confirm it clears the 74.1mm center bore)\u003cbr\u003e+ If your listed vehicle has 7\/16\"-20 hub studs (for example the Pontiac GTO 1964-1974, LeMans 1964-1981, Grand Prix 1969-1981 or Trans Am 1969-1981), mount the adapter with 7\/16\"-20 lug nuts in the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 12x1.5\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e+ If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003cbr\u003e+ Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size\u003cbr\u003e+ Perform a periodic check to ensure that they are torqued accordingly. \u003cbr\u003e+ Our \u003c\/span\u003e\u003cspan\u003e\u003ca class=\"in-cell-link\" href=\"https:\/\/ezaccessory.com\/pages\/wheel-thread-size-bolt-pattern-reference\" target=\"_blank\"\u003eapplication guide page\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e will answer most of your application fitment questions!\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-75-120-6mm-hub-hub-wheel-adapters\"\u003e5x4.75\" (5x120.65) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"0.75\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203551513,"sku":"5475-5475C-075","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203584281,"sku":"5475-5475C-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203617049,"sku":"5475-5475C-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203649817,"sku":"5475-5475C-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203682585,"sku":"5475-5475C-20","price":84.95,"currency_code":"USD","in_stock":true},{"title":"2.25\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203715353,"sku":"5475-5475C-225","price":89.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203748121,"sku":"5475-5475C-25","price":94.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 12x1.5 \/ 74.1mm","offer_id":46075203780889,"sku":"5475-5475C-30","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_5cb764c3-5bb1-4998-8ce3-72be434cdf18.png?v=1711517017"},{"product_id":"wheel-adapter-5-lug-4-75-to-5-lug-4-75-studs-7-16-pair","title":"5x4.75\" Wheel Spacers | Bolt-On, 7\/16\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e7\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4.75\" (120.7mm) bolt pattern cars to fit 5 lug 4.75\" (120.7mm) wheels. CNC machined billet aluminum and thickness options are 1\", 1.25\", 1.5\", 2\". New 7\/16\" thread size wheel studs and lug nuts are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eBuick\u003c\/strong\u003e: All Mid-Size RWD (64-88), Le Sabre CSM (77-85)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCadillac\u003c\/strong\u003e: Seville (76-80, not the 1977-1979 Seville, which is 5x5\")\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevrolet\u003c\/strong\u003e: All Mid \u0026amp; Full Size RWD (55-88, 5x4.75\" hubs only), Belar, Biscayne (77-87), Corvette (68-82), Impala, Caprice (77-87, 5x4.75\" hubs only; not the 1977-1985 Impala wagon or HD variants, which are 5x127)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevrolet Truck\/Van\/SUV\u003c\/strong\u003e: El Camino, Caballero (64-81), Van G-Series 1\/2 Ton (71-96)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOldsmobile\u003c\/strong\u003e: All Full Size 88, 98, RWD (W\/C 403 Eng.) (77-85)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePontiac\u003c\/strong\u003e: All Mid Size (Grand Prix, GTO, Lemans, etc) (64-87, not the 1964-1968 Grand Prix), All Full Size RWD (W\/O 403 Eng.) (77-90, 5x4.75\" hubs only), Firebird (67-92)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed vehicle's hub studs do not match the adapter's stud thread (for example 12x1.5 on the Pontiac Firebird 1982-1992 or Grand Prix 1982-1987, or the Cadillac Seville 1980), mount the adapter with lug nuts in your hub-stud thread and the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 7\/16\".\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x4.75\" (120.7mm) on both the hub side and the wheel side\u003c\/li\u003e\n\u003cli\u003eSame-pattern design, so it works as a wheel spacer that adds track width\u003c\/li\u003e\n\u003cli\u003eNew 7\/16\" thread wheel studs and lug nuts included\u003c\/li\u003e\n\u003cli\u003eCNC machined billet aluminum\u003c\/li\u003e\n\u003cli\u003eThickness options: 1\", 1.25\", 1.5\", and 2\"\u003c\/li\u003e\n\u003cli\u003eSold as a pair (2 adapters)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBolt each adapter to the hub first, then check that the factory studs do not stick out past the plate face. If they keep the wheel from sitting flush, which happens most often with the 1\" thickness, the factory studs need to be shortened. Torque all hardware to spec using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eMy car is already 5x4.75. What does this adapter do for me?\u003c\/strong\u003e\u003cbr\u003eSince the pattern is the same on both sides, this set works as a spacer. It moves each wheel outboard by the thickness you choose, adding track width and clearance for wider wheel and tire setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thread are the included studs?\u003c\/strong\u003e\u003cbr\u003eThe new wheel studs are 7\/16\" thread, and matching lug nuts come in the kit, so you have fresh hardware for mounting your wheels to the adapters.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-75-120-6mm-hub-hub-wheel-adapters\"\u003e5x4.75\" (5x120.65) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 7\/16\" \/ 73.1mm","offer_id":46075204829465,"sku":"5475-5475K-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 7\/16\" \/ 73.1mm","offer_id":46075204862233,"sku":"5475-5475K-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 7\/16\" \/ 73.1mm","offer_id":46075204895001,"sku":"5475-5475K-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 7\/16\" \/ 73.1mm","offer_id":46075204927769,"sku":"5475-5475K-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_36edfe99-4b78-4af7-8a4c-329401f9a0a0.png?v=1708105388"},{"product_id":"hub-centric-wheel-adapter-5-lug-5-jeep-pair","title":"5x5\" Hub Centric Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x5\" (5x127mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e71.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1.25\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 5\" (127mm) bolt pattern with Jeep 71.5mm hub to fit 5 lug 5\" (127mm) Jeep factory wheels (71.5mm bore). CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are guaranteed to fit the following models with original wheels. If the model and year of your vehicle is not on the list, you need to check and make sure your factory hub looks similar to diagram below and the height is no more than 20mm (see the the way to measure in the diagram below).\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep\u003c\/strong\u003e: Grand Cherokee (99-10), Wrangler (07-18)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to your 5x5 in (5x127 mm) Jeep hub with 71.5 mm bore so you can run 5x5 factory Jeep wheels (71.5 mm bore)\u003c\/li\u003e\n\u003cli\u003eSame pattern on both sides, so these work as spacers that add track width\u003c\/li\u003e\n\u003cli\u003eHub centric: snug fit on the vehicle hub, and a raised lip centers the factory wheel\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eNew wheel studs and lug nuts included; sold as a pair\u003c\/li\u003e\n\u003cli\u003eGuaranteed fit on Grand Cherokee (99-10) and Wrangler (07-18) with original wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSlide each adapter over a clean hub, seat it flat, and torque the mounting nuts to spec with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Mount the wheel on the raised lip, torque the lug nuts, and re-torque everything after the first 50 to 100 miles. Free US shipping.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed correctly: seated flat on the hub, torqued to spec, re-torqued after the first 50 to 100 miles, with full thread engagement on every stud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy Jeep is not on the list. Will these fit?\u003c\/strong\u003e\u003cbr\u003eCheck your factory hub against the diagram on this page. If the shape is similar, the hub height is no more than 20 mm, and your wheels have a 71.5 mm bore, they will fit.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-127mm-hub-hub-wheel-adapters\"\u003e5x5\" (5x127) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 1\/2\" \/ 71.5mm","offer_id":46075218231577,"sku":"5500-5500HK-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 71.5mm","offer_id":46075218264345,"sku":"5500-5500HK-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_1f964c52-3e28-4636-8004-daf0a62fa51b.png?v=1708042228"},{"product_id":"wheel-adapter-5-lug-5-to-5-lug-5-pair-1-2-studs","title":"5x5\" Wheel Spacers | Bolt-On, 1\/2\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5\" (5x127mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5\" (5x127mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e78.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e0.75\", 1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for both 5 lug 5\" (127mm) bolt pattern cars to fit 5 lug 5\" (127mm) bolt pattern wheels. CNC machined billet aluminum and thickness options are 1\", 1.25\", 1.5\" and 2\". New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eBuick\u003c\/strong\u003e: All full size (Electra, Le Sabre, Riviera) (64-87), Roadmaster, Estate Wgn (90-96)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCadillac\u003c\/strong\u003e: Fleetwood (86-96), Seville (77-79)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChrysler\u003c\/strong\u003e: Pacifica (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevrolet\u003c\/strong\u003e: Suburban Full Size 2x4 (71-91), Astro\/Safari (85-92), Astro (93-02), Blazer 2WD (73-82), C10 (71-87), Van G-Series 1\/2 Ton (71-96), Caprice Classic (90-97, not the 1990 coupe or sedan, which is 5x4.75), Impala SS (94-97)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Full size (Custom, Galaxie, T-Bird) (73-78)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePontiac\u003c\/strong\u003e: All full size RWD (with 403 Eng.) (71-90), Grand Ville (71-75)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eOldsmobile\u003c\/strong\u003e: All full size 88,98,RWD (with 403 Eng.) (64-92)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMercury\u003c\/strong\u003e: Cougar XR7, Marauder, Marquis, Meteor (73-78)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLincoln\u003c\/strong\u003e: Continental, Mark III (73-79)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep\u003c\/strong\u003e: Grand Cherokee (99-10), Wrangler JK and Wrangler Unlimited JK (07-18), Commander (06-10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x5\" (127mm) on both sides\u003c\/li\u003e\n\u003cli\u003eStud size: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eSame pattern in and out, so it adds track width\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause both sides share the 5x5\" (127mm) pattern, this pushes your existing 5x5\" wheels outward for a wider stance rather than changing the pattern. Seat each one flat on a clean hub, torque the 1\/2\" hardware to your vehicle's factory specification per the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after the first 50 to 100 miles. Shorten any factory studs that reach past the face so the wheel seats flush.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when seated flat, torqued to spec, re-torqued after the first 50 to 100 miles, and fully engaged on the studs and threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. Both sides are 5x5\" (127mm), so they keep your pattern and simply add track width.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-127mm-hub-hub-wheel-adapters\"\u003e5x5\" (5x127) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"0.75\" \/ 1\/2\" \/ 78.3mm","offer_id":46075218395417,"sku":"5500-5500P-075","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1\" \/ 1\/2\" \/ 78.3mm","offer_id":46075218428185,"sku":"5500-5500P-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 1\/2\" \/ 78.3mm","offer_id":46075218460953,"sku":"5500-5500P-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 1\/2\" \/ 78.3mm","offer_id":46075218493721,"sku":"5500-5500P-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 78.3mm","offer_id":46075218526489,"sku":"5500-5500P-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_b7260139-4f62-45b4-adc2-84b6a296889c.png?v=1708105379"},{"product_id":"wheel-adapter-5-lug-5-to-5-lug-5-pair-14x1-5-studs","title":"5x5\" Wheel Spacers | Bolt-On, 14x1.5 Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5\" (5x127mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5\" (5x127mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e78.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for both 5 lug 5\" (127mm) bolt pattern cars to fit 5 lug 5\" (127mm) bolt pattern wheels. CNC machined billet aluminum and thickness options are 1\", 1.25\", 1.5\" and 2\". New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eBuick\u003c\/strong\u003e: Roadmaster, Estate Wgn (90-96)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCadillac\u003c\/strong\u003e: Fleetwood (86-96)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChrysler\u003c\/strong\u003e: Pacifica (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevrolet\u003c\/strong\u003e: Tahoe, Yukon 2x4 (92-99), Tahoe 2WD (00, GMT400 body), 1\/2 Ton Truck All Model 2x4 (88-98), C\/K 1500 2WD (99, GMT400 body), Suburban 1500 2WD (92-99), Express 1500 (96-02), Savana 1500 (01-on), Caprice Classic (90-97, not the 1990 coupe or sedan, which is 5x4.75), Impala SS (94-97)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Durango (2011-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep\u003c\/strong\u003e: Grand Cherokee (11-on), Wrangler JL and Wrangler Unlimited JL (18-23), Gladiator (20-23)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x5\" (127mm) on both sides\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eMatching pattern, so it widens track width\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith 5x5\" (127mm) on the hub and wheel sides, this spaces your current 5x5\" wheels farther out instead of altering the pattern. Mount each adapter flat against a clean hub, torque the 14x1.5 hardware to your vehicle's factory specification while cross-checking the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after the first 50 to 100 miles. If factory studs protrude past the face, shorten them for a flush fit.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, as long as they seat flat on the hub, are torqued to spec, re-torqued after the first 50 to 100 miles, and have full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thread do the wheel nuts need?\u003c\/strong\u003e\u003cbr\u003eThe wheel studs on this adapter are 14x1.5, so use lug nuts matched to that thread.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-127mm-hub-hub-wheel-adapters\"\u003e5x5\" (5x127) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 78.3mm","offer_id":46075218788633,"sku":"5500-5500Q-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 14x1.5 \/ 78.3mm","offer_id":46075218821401,"sku":"5500-5500Q-125","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 78.3mm","offer_id":46075218854169,"sku":"5500-5500Q-15","price":74.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 78.3mm","offer_id":46075218886937,"sku":"5500-5500Q-20","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_3dfe4d56-c7e6-4334-bec1-9e97ac057e5f.png?v=1708105384"},{"product_id":"wheel-adapter-5-lug-5-5-to-5-lug-5-5-pair-9-16-studs","title":"5x5.5\" Wheel Spacers | Bolt-On, 9\/16\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for both 5 lug 5.5\" (139.7mm) bolt pattern cars to fit 5 lug 5.5\" (139.7mm) bolt pattern wheels. Center bore is 108mm. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Dakota (05-2011), Durango (04-2010), Ram 1500 New Body 2\/4WD (02-2011)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x5.5\" (5x139.7mm) hub and wheel side\u003c\/li\u003e\n\u003cli\u003eIdentical pattern both ways, so they space the wheels out and widen the track\u003c\/li\u003e\n\u003cli\u003e9\/16\" studs\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSince the pattern stays 5x5.5\" through the adapter, these work as spacers that add width while keeping your bolt pattern the same. Seat each flat against a clean hub, torque to your vehicle's factory specification, then re-torque after the first 50 to 100 miles. Our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e shows the proper order.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, provided they seat flat on a clean hub, are torqued to spec with full stud and thread engagement, and are re-torqued after the first 50 to 100 miles. Shorten any factory studs that protrude past the adapter face so the wheel seats flush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lug nuts do the studs take?\u003c\/strong\u003e\u003cbr\u003eThese use 9\/16\" studs, so pair them with lug nuts made for a 9\/16\" thread. Verify your current hardware first. Free US shipping is included.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-5-139-7mm-hub-hub-wheel-adapters\"\u003e5x5.5\" (5x139.7) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 9\/16\" \/ 108.2mm","offer_id":46075224293657,"sku":"5550-5550D-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 9\/16\" \/ 108.2mm","offer_id":46075224326425,"sku":"5550-5550D-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 9\/16\" \/ 108.2mm","offer_id":46075224359193,"sku":"5550-5550D-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 9\/16\" \/ 108.2mm","offer_id":46075224391961,"sku":"5550-5550D-20","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_6a68ddf9-3d95-4d55-80a4-6ef3bb689ec4.png?v=1708105614"},{"product_id":"wheel-adapter-5-lug-5-5-to-5-lug-5-5-pair-1-2-studs","title":"5x5.5\" Wheel Spacers | Bolt-On, 1\/2\" Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for both 5 lug 5.5\" (139.7mm) bolt pattern cars to fit 5 lug 5.5\" (139.7mm) bolt pattern wheels. Center bore is 108mm. CNC machined billet aluminum and thickness options are 1\", 1.5\" and 2\". New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Ramcharger part-time 4WD (79-83), Ram 1\/2 Ton 2\u0026amp;4 WD (94-01), 1\/2 \u0026amp; 3\/4 Ton Truck (79-93), Ram Van (85-96)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Bronco (66-on, not the 2021-2024 Bronco, which is 6x139.7), F 1\/2 ton F-100, 150 (54-96), 1\/2 Ton E-100, 150 Van (70-96), 1\/2 Ton E-150 Van (97-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eGeo: \u003c\/strong\u003eTracker\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e(89-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eJeep: \u003c\/strong\u003eAll Jeep with a 5x5.5\" bolt pattern, CJ (46-85), CJ-7 and CJ-8 Scrambler (86)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eKia: \u003c\/strong\u003eSorento (03-10), Sportage (94-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSuzuki: \u003c\/strong\u003eSamurai (86-93), Sidekick (86-97), X-90 (96-98), XL-7 (01-on), Vitara (98-on), Grand Vitara (99-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIf your listed vehicle's hub studs differ from the adapter's stud thread, or use left-hand threads, mount the adapter with lug nuts matching your hub-stud thread and handedness in the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 1\/2\". Confirm full engagement and flush seating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x5.5\" (5x139.7mm) in and out\u003c\/li\u003e\n\u003cli\u003eSame pattern both sides, so these push the wheels outward and add track width\u003c\/li\u003e\n\u003cli\u003e1\/2\" studs\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the hub and wheel pattern match at 5x5.5\", these act as spacers that widen your stance without changing bolt pattern. Seat each one flat on a clean hub, torque to your vehicle's factory specification, and re-torque after the first 50 to 100 miles. See our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e for the proper sequence.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they seat flat against a clean hub, are torqued to spec with full stud and thread engagement, and re-torqued after the first 50 to 100 miles. If your factory studs extend past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat thread do the wheels use on these?\u003c\/strong\u003e\u003cbr\u003eThe studs are 1\/2\", so you will need lug nuts that match a 1\/2\" thread. Confirm your current nuts before installing. Free US shipping is included.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-5-139-7mm-hub-hub-wheel-adapters\"\u003e5x5.5\" (5x139.7) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 1\/2\" \/ 108.2mm","offer_id":46075225571609,"sku":"5550-5550J-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 1\/2\" \/ 108.2mm","offer_id":46075225637145,"sku":"5550-5550J-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 1\/2\" \/ 108.2mm","offer_id":46075225669913,"sku":"5550-5550J-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 108.2mm","offer_id":46075225702681,"sku":"5550-5550J-20","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_77399537-7beb-4e50-8787-e3fa51138e4e.png?v=1711517610"},{"product_id":"wheel-adapter-5-lug-5-5-to-5-lug-5-5-pair-14x1-5-studs","title":"5x5.5\" Wheel Spacers | Bolt-On, 14x1.5 Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x5.5\" (5x139.7mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e108mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for both 5 lug 5.5\" (139.7mm) bolt pattern cars to fit 5 lug 5.5\" (139.7mm) bolt pattern wheels. Center bore is 108mm. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: Ram (2012-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5x5.5\" (5x139.7mm) on both sides\u003c\/li\u003e\n\u003cli\u003eMatching pattern in and out, so they add track width like a spacer\u003c\/li\u003e\n\u003cli\u003e14x1.5 studs\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith the same 5x5.5\" pattern going in and coming out, these widen your track without altering your bolt circle. Place each adapter flat on a clean hub, tighten the hardware to your vehicle's factory specification, and re-torque after the first 50 to 100 miles of driving. The \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e lays out the star pattern.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes. They need to seat flat on a clean hub, be torqued to spec with full stud and thread engagement, and be re-torqued after the first 50 to 100 miles. Any factory studs sticking past the adapter face should be shortened so the wheel sits flush.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich lug nuts fit these studs?\u003c\/strong\u003e\u003cbr\u003eThe studs are 14x1.5, so use lug nuts threaded for 14x1.5. Double-check your existing nuts before mounting wheels. Free US shipping is included.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x5-5-139-7mm-hub-hub-wheel-adapters\"\u003e5x5.5\" (5x139.7) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1.25\" \/ 14x1.5 \/ 108mm","offer_id":46075226226969,"sku":"5550-5550M-125","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 108mm","offer_id":46075226259737,"sku":"5550-5550M-15","price":74.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 108mm","offer_id":46075226292505,"sku":"5550-5550M-20","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_12b24544-3239-47b2-af7f-882efe3f027c.png?v=1708105610"},{"product_id":"hub-centric-wheel-adapter-5x112-mercedes-pair","title":"5x112 Hub Centric Wheel Spacers | Bolt-On, 66.56mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x112mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e66.56mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 112mm bolt pattern Mercedes hub to fit 5 lug 112mm Mercedes factory wheels. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub as well as the wheel side.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThey fit the following models with factory hub height no more than 20mm\u003c\/strong\u003e (see the way to measure in the diagram below).\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensure durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\n\u003cp\u003eOn vehicles with lug bolts, use hub-side lug bolts in the vehicle's required thread and the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads, flush seating and clearance from brake or other components.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x112mm-hub-wheel-adapters\"\u003e5x112 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 66.56mm","offer_id":46148301390105,"sku":"5112-5112HM-10","price":79.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 12x1.5 \/ 66.56mm","offer_id":46148301422873,"sku":"5112-5112HM-15","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_5adfa726-b6f0-4e06-a084-fb463bf3ff3a.png?v=1708042275"},{"product_id":"hub-centric-wheel-adapter-5x130-porsche-pair","title":"5x130 Hub Centric Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e71.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.5\", 2\", 2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 130mm bolt pattern Porsche hub to fit 5 lug 130mm Porsche factory wheels. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThey fit the following models with factory hub height no more than 20mm\u003c\/strong\u003e (see the the way to measure in the diagram below). The front hub in some years like model 944, 928,911 stick out further than the rear. You will need to do the measurement to make sure these adapters fit on the front also.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePorsche\u003c\/strong\u003e: 911, 928, 944, 968\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003cbr data-mce-fragment=\"1\"\u003e **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x130mm-hub-wheel-adapters\"\u003e5x130 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 71.5mm","offer_id":46148333043993,"sku":"5130-5130HP-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 71.5mm","offer_id":46148333076761,"sku":"5130-5130HP-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 71.5mm","offer_id":46148333109529,"sku":"5130-5130HP-20","price":84.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 14x1.5 \/ 71.5mm","offer_id":46148333142297,"sku":"5130-5130HP-25","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_1aedcc64-a132-448a-ac81-e68bb7c8c750.png?v=1711512248"},{"product_id":"wheel-adapter-5-lug-4-5-to-5-lug-4-5-mustang-2015-pair","title":"5x4.5\" Wheel Spacers | Bolt-On, 14x1.5 Studs (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x4.5\" (5x114.3mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e73mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 4.5\" (114.3mm) bolt pattern hubs to fit 5 lug 4.5\" (114.3mm) wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included. These adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFord\u003c\/strong\u003e: Mustang (2015-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-5-114-3mm-hub-wheel-adapters\"\u003e5x4.5\" (5x114.3) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 73mm","offer_id":47734579691801,"sku":"5450-5450Z-10","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_f499c7bb-7cf1-464c-b3f1-97439f49486c.png?v=1708105360"},{"product_id":"hub-centric-wheel-adapter-5-lug-4-75-corvette-pair","title":"5x4.75\" Hub Centric Wheel Spacers | Bolt-On, 70.3mm Bore (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x4.75\" (5x120.65mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e70.3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e12x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese hub centric adapters are used for 5 lug 4.75\" (120.7) bolt pattern with 70.3mm hub to fit 5 lug 4.75\" (120.7mm) Chevy factory wheels (70.3mm bore) with certain conditions. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey are guaranteed to fit the following models with original wheels. If the model and year of your vehicle is not on the list, you need to check and make sure your factory hub looks similar to diagram below and the height is no more than 20mm (see the the way to measure in the diagram below).\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eChevy\u003c\/strong\u003e: Corvette (90-19), Camaro (93-03)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePontiac\u003c\/strong\u003e: Firebird (93-03)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/Picture1_480x480.jpg?v=1691775958\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x4-75-120-6mm-hub-hub-wheel-adapters\"\u003e5x4.75\" (5x120.65) hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 12x1.5 \/ 70.3mm","offer_id":46148499996953,"sku":"5475-5475HV-10","price":64.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 12x1.5 \/ 70.3mm","offer_id":46148500062489,"sku":"5475-5475HV-125","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 12x1.5 \/ 70.3mm","offer_id":46148500128025,"sku":"5475-5475HV-15","price":74.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 12x1.5 \/ 70.3mm","offer_id":46148500193561,"sku":"5475-5475HV-20","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5LugHubCentricWheelAdapters_01_e7541f2b-c286-4d25-9a14-35e4db7bd286.png?v=1708042192"},{"product_id":"wheel-adapter-5-lug-150-to-5-lug-150-pair","title":"5x150 Wheel Spacers | Bolt-On (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts from (hub)\u003c\/th\u003e\n\u003ctd\u003e5x150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConverts to (wheel)\u003c\/th\u003e\n\u003ctd\u003e5x150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e110.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStud thread\u003c\/th\u003e\n\u003ctd\u003e14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness options\u003c\/th\u003e\n\u003ctd\u003e1\", 1.25\", 1.5\", 2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 5 lug 150mm bolt pattern cars to fit 5 lug 150mm bolt pattern wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cdetails class=\"eza-fitfold\" data-eza=\"FITFOLD-v1\"\u003e\u003csummary\u003e\u003cstrong\u003eVehicle fitment\u003c\/strong\u003e\u003c\/summary\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eToyota\u003c\/strong\u003e: Tundra (07-on, not the 2022-2023 Tundra, which is 6x139.7), Landcruiser (98-on, not the 2024 and 2026 Land Cruiser, which are 6x139.7)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLexus\u003c\/strong\u003e: LX470 (97-on)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" thick adapters.\u003c\/p\u003e\n\u003cp class=\"eza-convlinks\"\u003e\u003c!-- EZA-CONVLINKS-v1 --\u003e\u003cstrong\u003eShop related:\u003c\/strong\u003e \u003ca href=\"\/collections\/5x150mm-hub-wheel-adapters\"\u003e5x150 hub wheel adapters\u003c\/a\u003e · \u003ca href=\"\/collections\/5-lug-same-pattern-wheel-adapters\"\u003e5 lug same pattern wheel adapters\u003c\/a\u003e\u003c\/p\u003e","brand":"EZAccessory","offers":[{"title":"1\" \/ 14x1.5 \/ 110.1mm","offer_id":46149542576409,"sku":"5150-5150Y-10","price":69.95,"currency_code":"USD","in_stock":true},{"title":"1.25\" \/ 14x1.5 \/ 110.1mm","offer_id":46149542609177,"sku":"5150-5150Y-125","price":74.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 110.1mm","offer_id":46149542641945,"sku":"5150-5150Y-15","price":79.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 110.1mm","offer_id":46149542674713,"sku":"5150-5150Y-20","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5Lug_01_81b161ab-29d3-4386-ad8c-a3a96dd78714.png?v=1711517393"},{"product_id":"billet-hub-centric-wheel-spacers-5-lug-110mm-flat-65-1mm-pair","title":"Billet Hub Centric Wheel Spacers 5 Lug 110mm Flat 65.1mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e65.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. 5mm thickness option. CNC machined. Fit 5 lug 110mm bolt pattern with 65.1mm hub. Please check the thickness of spacers and make sure your bolts are long enough.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eCadillac: Catera (97-01)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eChevy: Cobalt SS, Sport (05-08), Cobalt SS (09-10), HHR (06-11), Malibu (04-12)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eDodge: Dart (13-16)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003ePontiac: G5 GT (07-08), G6 Base, GT (05-10), Solstice (06-10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eSaab: 900 (94-98), 9-3 (99-11), 9-5 (99-09)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eSaturn: Astra (08-09), Aura XE XR (07-09), Ion Redline (04-07), L Series (99-05), Sky, Sky Redline (07-10)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eJeep: Renegade (15-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 5 lug 110mm (5x110) with a 65.1mm hub bore\u003c\/li\u003e\n\u003cli\u003eFlat hub centric design, available in 5mm thickness\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061 T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eListed applications include Chevy Cobalt SS, HHR and Malibu, Pontiac G5 and Solstice, Saab 9-3 and 9-5, Saturn Sky and Jeep Renegade (2015 on)\u003c\/li\u003e\n\u003cli\u003eSold as a pair (2 spacers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA spacer this thin slips over your existing studs or bolts, so make sure the hardware still reaches full thread engagement with the extra 5mm in place. Torque the wheels to spec using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit if my hub is not 65.1mm?\u003c\/strong\u003e\u003cbr\u003eNo. The bore is machined for a 65.1mm hub, and a hub centric spacer only centers properly when that bore matches your hub. Check your hub diameter before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a 5mm spacer actually change?\u003c\/strong\u003e\u003cbr\u003eIt moves each wheel out 5mm, giving a slightly wider stance and a bit of breathing room between the wheel and nearby suspension or brake components. Bolt pattern and hub bore stay unchanged.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"5mm","offer_id":47734377218329,"sku":"5108-5110-5","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5120F-5-2_8c415780-3d3d-4d17-86f6-d86a7325e005.png?v=1703100793"},{"product_id":"billet-hub-centric-wheel-spacers-5x100-5x112-audi-10mm-pair","title":"Billet Hub Centric Wheel Spacers 5x112 Audi 10mm (Pair)","description":"\u003cdiv class=\"eza-specs\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x112mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e57.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"ProductDetail_ProductDetails_div\"\u003e\n\u003cp align=\"left\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fits Audi 5x112 bolt-pattern applications only. Does not fit 5x100 applications. Hub bore 57.1mm. Hub centric lip 57.1mm as well. Please check the thickness of spacers and make sure your bolts are long enough.\u003c\/p\u003e\n\u003cp align=\"left\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" open=\"\"\u003e\n\u003csummary\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eFits the Audi 5 lug 112mm (5x112) bolt pattern\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e10mm thickness per spacer\u003c\/li\u003e\n\u003cli\u003e57.1mm hub bore with a matching 57.1mm hub centric lip, so the wheel centers on the hub rather than the bolts\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061 T6 billet aluminum, sold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese slip over the factory hub, which means your wheel bolts thread in 10mm less than stock. Check bolt length before install and move to longer bolts if needed to keep full engagement, then torque to spec with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"eza-riderfold\" open=\"\"\u003e\n\u003csummary\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhich bolt pattern do these spacers fit?\u003c\/strong\u003e\u003cbr\u003eThese spacers fit 5x112 bolt-pattern applications only. \u003cmeta charset=\"utf-8\"\u003eDoes not fit 5×100 applications. Confirm your pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat keeps the wheel centered with a spacer in between?\u003c\/strong\u003e\u003cbr\u003eThe machined 57.1mm lip. It takes over the job of the factory hub, locating the wheel precisely so the bolts clamp the wheel instead of centering it.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"10mm","offer_id":47734377120025,"sku":"5112-10A","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112-10A-2_7201ed2c-a940-4d80-bdb2-ce36a185f0ba.jpg?v=1703100795"},{"product_id":"billet-hub-centric-wheel-spacers-mercedes-10mm-pair","title":"Billet Hub Centric Wheel Spacers Mercedes 10mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit following Mercedes 5 lug 112mm bolt pattern with conditions. Certain models only work with the rear axles. We will have a new version of the spacer that allows fitting hub height up to 9mm soon.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey fit the following Mercedes with factory hub height no more than 8mm (see the the way to measure in the diagram below):\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW220\u003c\/strong\u003e: S320, S400, S420, S500, S600 (00-05)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW216\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (07-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW221\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: S320, S350, S450, S600, S63 AMG (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW163\u003c\/strong\u003e: M Class (88-05)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW164\u003c\/strong\u003e: ML350, ML500 (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW164G\u003c\/strong\u003e: GL-Class (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW251\u003c\/strong\u003e: R350, R500 (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW170\u003c\/strong\u003e: SLK (97-03)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW202\u003c\/strong\u003e: C220, C280 (94-00); C230 (96-00); C36 AMG (94-95); C43 AMG (96-00)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW208\u003c\/strong\u003e: CLK320 (97-02); CLK36 AMG, CLK43 AMG (99-06); CLK430 (97-02); CLK55 AMG (99-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW208C\u003c\/strong\u003e: CLK320 Cabrio, CLK430 Cabrio (99-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW210\u003c\/strong\u003e: E300D, E320, E420, E430, E55 AMG (96-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW210T\u003c\/strong\u003e Wagon: E320T (96-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW171\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: SLK280, SLK350, SLK55 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW203\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: C230 Sport Coupe (02-07); C230 Sport Wagon (02-04); C240 (01-04); C32 AMG (02-07); C320 (01-07); C320 Sport Wagon (02-04); C55 AMG (01-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW209\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLK320 Cabrio, CLK350 (03-06); CLK500, CLK55 AMG (03-09); CLK55 Cabrio (03-on); CLK550 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eR230\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only):\u003c\/strong\u003e SL500 (03-06); SL55 AMG, SL600 (03-on); SL550 (07-on), SL65 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320, CDI, E320 Wagon,(03-on); E350 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211T\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320T AWD, E350T AWD (05-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW215\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (00-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW219\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLS (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW204\u003c\/strong\u003e: C300, C350, C63 AMG (08-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW207\u003c\/strong\u003e: E350 Coupe, E550 Coupe (10-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW212\u003c\/strong\u003e: E350 Sedan (00-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacer ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/36_480x480.jpg?v=1703607151\"\u003e\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for the Mercedes vehicles listed in the description above\u003c\/li\u003e\n\u003cli\u003eHub centric for accurate wheel centering on the factory hub\u003c\/li\u003e\n\u003cli\u003eAdds 10mm of track width per side\u003c\/li\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 10mm spacer nudges the wheel outward for a wider stance or extra clearance. Make sure each spacer sits flush on a clean hub face, then torque the hardware to your vehicle's factory specification, referencing our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-check the torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eDo spacers change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. A spacer keeps your existing bolt pattern and simply moves the wheel outward, so your current wheels bolt on the same way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know these suit my car?\u003c\/strong\u003e\u003cbr\u003eConfirm your Mercedes model and year against the applications in the description above, as hub and pattern requirements vary by chassis.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"10mm","offer_id":47734376988953,"sku":"5112-10M","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112M-2_7e62d14e-b778-4a71-8094-08c0544f2b49.jpg?v=1703100797"},{"product_id":"billet-hub-centric-wheel-spacers-mercedes-10mm-capped-front-pair","title":"Billet Hub Centric Wheel Spacers Mercedes 10mm Capped Front (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit following Mercedes 5 lug 112mm bolt pattern.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW216\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (07-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW221\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: S320, S350, S450, S600, S63 AMG (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW171\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: SLK280, SLK350, SLK55 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW203\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: C230 Sport Coupe (02-07); C230 Sport Wagon (02-04); C240 (01-04); C32 AMG (02-07); C320 (01-07); C320 Sport Wagon (02-04); C55 AMG (01-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW209\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CLK320 Cabrio, CLK350 (03-06); CLK500, CLK55 AMG (03-09); CLK55 Cabrio (03-on); CLK550 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eR230\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only):\u003c\/strong\u003e SL500 (03-06); SL55 AMG, SL600 (03-on); SL550 (07-on), SL65 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: E320, CDI, E320 Wagon,(03-on); E350 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211T\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: E320T AWD, E350T AWD (05-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW215\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (00-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW219\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CLS (04-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacer ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eHub centric spacers for Mercedes applications\u003c\/li\u003e\n\u003cli\u003e10mm thickness per spacer\u003c\/li\u003e\n\u003cli\u003eCapped front design that hides the hub face for a clean look\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe spacer centers on the Mercedes hub and moves the wheel outward by 10mm. Fit each one flat, torque the bolts to your vehicle's factory specification with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after the first 50 to 100 miles. Plan on bolts about 10mm longer than stock so you keep full thread engagement into the hub.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the capped front do?\u003c\/strong\u003e\u003cbr\u003eThe cap covers the exposed hub area behind the wheel, giving a tidier appearance while the spacer still centers the wheel precisely on the hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these spacers safe?\u003c\/strong\u003e\u003cbr\u003eYes, when seated flat on a clean hub, torqued to spec, re-torqued after the first 50 to 100 miles, and installed with bolts that give full thread engagement.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"10mm","offer_id":47734376890649,"sku":"5112-10M-CAP","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/capped_billet_spacers.png?v=1779391382"},{"product_id":"billet-hub-centric-wheel-spacers-audi-vw-15mm-pair","title":"Billet Hub Centric Wheel Spacers Audi VW 15mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter bore\u003c\/th\u003e\n\u003ctd\u003e57.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit Audi 5 lug 112mm bolt pattern (it is not for TT 1999-2006, which is 5 lug 100mm bolt pattern). Center hub is 57.1mm and hub centric lip is 57.1mm as well. Please check the thickness of spacers and make sure your bolts are long enough.\u003c\/p\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eFits Audi and VW hubs with the 5 lug 112mm (5x112) bolt pattern\u003c\/li\u003e\n\u003cli\u003eNot for the 1999-2006 Audi TT, which uses a 5 lug 100mm pattern\u003c\/li\u003e\n\u003cli\u003e15mm thickness per spacer\u003c\/li\u003e\n\u003cli\u003e57.1mm center bore and 57.1mm hub centric lip for a precisely centered wheel\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 T6 billet aluminum, sold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 15mm of added thickness, factory wheel bolts rarely have enough thread left, so plan on longer bolts that restore full engagement; the description flags this check for good reason. Torque to your vehicle's spec using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhich vehicles do these fit?\u003c\/strong\u003e\u003cbr\u003eAudi and VW models running the 5 lug 112mm bolt pattern with a 57.1mm hub. The one exclusion called out in the description is the 1999-2006 TT, which uses 5x100.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much longer should my new bolts be?\u003c\/strong\u003e\u003cbr\u003eLong enough to recover the 15mm of engagement the spacer takes away, without poking through and contacting anything behind the hub. Match your factory seat type and thread when choosing them.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"15mm","offer_id":47734376825113,"sku":"5112-15A","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112-10A-2.jpg?v=1703100801"},{"product_id":"billet-hub-centric-wheel-spacers-mercedes-15mm-pair","title":"Billet Hub Centric Wheel Spacers Mercedes 15mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs.  6061 T6 billet aluminum. CNC machined. Fit following Mercedes 5 lug 112mm bolt pattern with conditions. Certain models only work with the rear axles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey fit the following Mercedes with factory hub height no more than 10mm (see the way to measure in the diagram below):\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW220\u003c\/strong\u003e: S320, S400, S420, S500, S600 (00-05)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW216\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (07-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW221\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: S320, S350, S450, S600, S63 AMG (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW163\u003c\/strong\u003e: M Class (88-05)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW164\u003c\/strong\u003e: ML350, ML500 (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW164G\u003c\/strong\u003e: GL-Class (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW251\u003c\/strong\u003e: R350, R500 (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW170\u003c\/strong\u003e: SLK (97-03)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW202\u003c\/strong\u003e: C220, C280 (94-00); C230 (96-00); C36 AMG (94-95); C43 AMG (96-00)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW208\u003c\/strong\u003e: CLK320 (97-02); CLK36 AMG, CLK43 AMG (99-06); CLK430 (97-02); CLK55 AMG (99-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW208C\u003c\/strong\u003e: CLK320 Cabrio, CLK430 Cabrio (99-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW210\u003c\/strong\u003e: E300D, E320, E420, E430, E55 AMG (96-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW210T\u003c\/strong\u003e Wagon: E320T (96-02)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW171\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: SLK280, SLK350, SLK55 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW203\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: C230 Sport Coupe (02-07); C230 Sport Wagon (02-04); C240 (01-04); C32 AMG (02-07); C320 (01-07); C320 Sport Wagon (02-04); C55 AMG (01-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW209\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLK320 Cabrio, CLK350 (03-06); CLK500, CLK55 AMG (03-09); CLK55 Cabrio (03-on); CLK550 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eR230\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only):\u003c\/strong\u003e SL500 (03-06); SL55 AMG, SL600 (03-on); SL550 (07-on), SL65 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320, CDI, E320 Wagon,(03-on); E350 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211T\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320T AWD, E350T AWD (05-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW215\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (00-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW219\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLS (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW204\u003c\/strong\u003e: C300, C350, C63 AMG (08-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW207\u003c\/strong\u003e: E350 Coupe, E550 Coupe (10-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW212\u003c\/strong\u003e: E350 Sedan (00-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacer ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/36_480x480.jpg?v=1703607151\"\u003e\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eSuits the Mercedes vehicles listed in the description above\u003c\/li\u003e\n\u003cli\u003eHub centric mounting for precise centering\u003c\/li\u003e\n\u003cli\u003e15mm of spacing added per side\u003c\/li\u003e\n\u003cli\u003eSold in a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitting a 15mm spacer pushes each wheel outward for a wider, more planted stance. Mercedes cars use lug bolts: fit longer lug bolts in your vehicle's thread and your wheel's seat so they keep the thread engagement required by the vehicle, wheel and fastener manufacturers at 15mm, and check that the bolts do not contact brake or other components. Confirm the spacer seats flush on a clean hub, then bring the hardware to your vehicle's factory specification with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eAre these hub centric?\u003c\/strong\u003e\u003cbr\u003eYes. When correctly matched to the hub and wheel, these spacers help center the wheel and prevent vibration from an off-center fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check fitment?\u003c\/strong\u003e\u003cbr\u003eMatch your Mercedes model and year to the applications in the description above, because hub size and bolt pattern differ across the range.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"15mm","offer_id":47734376628505,"sku":"5112-15M","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112M-2.jpg?v=1703100803"},{"product_id":"billet-hub-centric-wheel-spacers-mercedes-15mm-capped-pair","title":"Billet Hub Centric Wheel Spacers Mercedes 15mm Capped (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e15mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit following Mercedes 5 lug 112mm bolt pattern.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW216\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (07-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW221\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: S320, S350, S450, S600, S63 AMG (06-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW171\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: SLK280, SLK350, SLK55 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW203\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: C230 Sport Coupe (02-07); C230 Sport Wagon (02-04); C240 (01-04); C32 AMG (02-07); C320 (01-07); C320 Sport Wagon (02-04); C55 AMG (01-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW209\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CLK320 Cabrio, CLK350 (03-06); CLK500, CLK55 AMG (03-09); CLK55 Cabrio (03-on); CLK550 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eR230\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only):\u003c\/strong\u003e SL500 (03-06); SL55 AMG, SL600 (03-on); SL550 (07-on), SL65 AMG (04-on)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: E320, CDI, E320 Wagon,(03-on); E350 (03-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW211T\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: E320T AWD, E350T AWD (05-09)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW215\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (00-06)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eW219\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e(Front Only)\u003c\/strong\u003e: CLS (04-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacer ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eFor the Mercedes applications shown in the description above\u003c\/li\u003e\n\u003cli\u003eHub centric to keep the wheel centered on the hub\u003c\/li\u003e\n\u003cli\u003e15mm of added spacing per side\u003c\/li\u003e\n\u003cli\u003eCapped design with a finished outer face\u003c\/li\u003e\n\u003cli\u003eComes as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis 15mm spacer widens track and helps larger wheels or brakes clear the suspension. Seat it flat against a clean hub and torque to your vehicle's factory specification, using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e as a guide. Re-torque after the first 50 to 100 miles on the road.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the capped design do?\u003c\/strong\u003e\u003cbr\u003eThe cap gives the spacer a clean, enclosed outer face while the hub centric fit still centers the wheel for a smooth ride.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my Mercedes?\u003c\/strong\u003e\u003cbr\u003eCross-check your model and year with the applications in the description above before buying, since fitment is chassis specific.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"15mm","offer_id":47734376530201,"sku":"5112-15M-CAP","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/capped_billet_spacers.png?v=1779391382"},{"product_id":"billet-hub-centric-wheel-spacers-5x112-audi-20mm-pair","title":"Billet Hub Centric Wheel Spacers 5x112 Audi 20mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt pattern(s)\u003c\/th\u003e\n\u003ctd\u003e5x112mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit Audi 5 lug 112mm bolt pattern (it is not for TT, which is 5 lug 100mm bolt pattern). Please check the thickness of spacers and make sure your bolts are long enough.\u003c\/p\u003e\n\u003cp align=\"left\" data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 spacers).\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e20mm thickness per spacer, sold as a pair\u003c\/li\u003e\n\u003cli\u003eFits the Audi 5 lug 112mm (5x112) bolt pattern\u003c\/li\u003e\n\u003cli\u003eNot for the Audi TT, which uses a 5 lug 100mm pattern\u003c\/li\u003e\n\u003cli\u003eHub centric design keeps the wheel centered on the hub\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061 T6 billet aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck that your lug bolts are long enough to keep full thread engagement through the added 20mm before you install; if they are not, fit longer bolts first. Seat each spacer flat against a clean hub face, torque to your vehicle spec with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after the first 50 to 100 miles.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my Audi TT?\u003c\/strong\u003e\u003cbr\u003eNo. The TT runs a 5 lug 100mm bolt pattern, and these spacers are drilled for the 5x112 pattern used on other 5 lug Audi models. Confirm your bolt pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need longer lug bolts with a 20mm spacer?\u003c\/strong\u003e\u003cbr\u003eMeasure before you drive. The spacer takes up 20mm of bolt reach, so your factory bolts must still achieve full thread engagement in the hub. If they come up short, install correspondingly longer bolts.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"20mm","offer_id":47734375907609,"sku":"5112-20A","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112-10A-2_4e022f7f-9e24-421e-9611-622978464a59.jpg?v=1703100807"},{"product_id":"billet-hub-centric-wheel-spacers-mercedes-20mm-pair","title":"Billet Hub Centric Wheel Spacers Mercedes 20mm (Pair)","description":"\u003cdiv class=\"eza-specs\" data-eza=\"SPECBLOCK-v1\"\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCentering\u003c\/th\u003e\n\u003ctd\u003eHub centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003ePair (2 pieces)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric billet spacers sold in pairs. 6061 T6 billet aluminum. CNC machined. Fit following Mercedes 5 lug 112mm bolt pattern with conditions. Certain models only work with the rear axles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThey fit the following Mercedes with factory hub height no more than 12.5mm (see the the way to measure in the diagram below):\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW220\u003c\/strong\u003e: S320, S400, S420, S500, S600 (00-05)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW216\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (07-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW221\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: S320, S350, S450, S600, S63 AMG (06-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW163\u003c\/strong\u003e: M Class (88-05)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW164\u003c\/strong\u003e: ML350, ML500 (06-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW164G\u003c\/strong\u003e: GL-Class (06-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW251\u003c\/strong\u003e: R350, R500 (06-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW170\u003c\/strong\u003e: SLK (97-03)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW202\u003c\/strong\u003e: C220, C280 (94-00); C230 (96-00); C36 AMG (94-95); C43 AMG (96-00)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW208\u003c\/strong\u003e: CLK320 (97-02); CLK36 AMG, CLK43 AMG (99-06); CLK430 (97-02); CLK55 AMG (99-06)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW208C\u003c\/strong\u003e: CLK320 Cabrio, CLK430 Cabrio (99-02)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW210\u003c\/strong\u003e: E300D, E320, E420, E430, E55 AMG (96-02)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW210T\u003c\/strong\u003e Wagon: E320T (96-02)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW171\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: SLK280, SLK350, SLK55 AMG (04-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW203\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: C230 Sport Coupe (02-07); C230 Sport Wagon (02-04); C240 (01-04); C32 AMG (02-07); C320 (01-07); C320 Sport Wagon (02-04); C55 AMG (01-06)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW209\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLK320 Cabrio, CLK350 (03-06); CLK500, CLK55 AMG (03-09); CLK55 Cabrio (03-on); CLK550 (03-09)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eR230\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only):\u003c\/strong\u003e SL500 (03-06); SL55 AMG, SL600 (03-on); SL550 (07-on), SL65 AMG (04-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW211\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320, CDI, E320 Wagon,(03-on); E350 (03-09)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW211T\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: E320T AWD, E350T AWD (05-09)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW215\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CL500, CL55 AMG, CL600, CL63 AMG, CL65 AMG (00-06)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW219\u003c\/strong\u003e \u003cstrong data-mce-fragment=\"1\"\u003e(Rear Only)\u003c\/strong\u003e: CLS (04-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW204\u003c\/strong\u003e: C300, C350, C63 AMG (08-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW207\u003c\/strong\u003e: E350 Coupe, E550 Coupe (10-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e·        \u003cstrong data-mce-fragment=\"1\"\u003eW212\u003c\/strong\u003e: E350 Sedan (00-on)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality spacer ensures durability and strength. Price is for a pair (2 pieces).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize:\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/36_480x480.jpg?v=1703607151\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eFitment and specs\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eMade for the Mercedes applications in the description above\u003c\/li\u003e\n\u003cli\u003eHub centric fit centers the wheel on the factory hub\u003c\/li\u003e\n\u003cli\u003e20mm of added width per side\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 20mm, these spacers give a noticeably wider track and room for bigger brake or wheel setups. Seat each one flat on a clean hub face and torque to your vehicle's factory specification, checking our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-torque after the first 50 to 100 miles of driving.\u003c\/p\u003e\n\u003c\/details\u003e\u003cdetails class=\"eza-riderfold\" data-eza=\"RIDERFOLD-v1\"\u003e\u003csummary\u003e\u003ch3\u003eCommon questions\u003c\/h3\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWill 20mm affect my ride quality?\u003c\/strong\u003e\u003cbr\u003eThe hub centric design keeps the wheel centered, so the ride stays smooth while you gain a wider, more aggressive stance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit my Mercedes?\u003c\/strong\u003e\u003cbr\u003eVerify your model and year against the applications in the description above, since the correct hub and pattern depend on your chassis.\u003c\/p\u003e\n\u003c\/details\u003e\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"EZAccessory","offers":[{"title":"20mm","offer_id":47734375776537,"sku":"5112-20M","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/5112M-2_0f93bba1-9741-4c41-b1cc-043be7049e27.jpg?v=1703100809"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/collections\/5_lug_tile_image.png?v=1790104343","url":"https:\/\/ezaccessory.com\/collections\/5-lug-wheel-spacers.oembed?page=4","provider":"EZAccessory","version":"1.0","type":"link"}