{"title":"Wheel Adapters for Ford F-250","description":"\u003ch2\u003eWheel Adapters for Ford F-250\u003c\/h2\u003e\n\u003cp\u003eQuick answer: 1999 and newer Ford F-250 Super Duty trucks with single rear wheels use the 8x170 bolt pattern, older 8 lug F-250s through 1997 use 8x6.5 (the same as 8x165.1 in metric), and the 1997-1999 F-250 Light Duty uses the unusual 7 lug 7x150 pattern. This collection includes adapters that bolt onto all three F-250 hub patterns, so nearly every model year is covered. Bolt patterns are safety critical, so verify your truck's pattern before ordering.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eFord F-250 bolt pattern by year \u0026amp; common questions\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e1999-2026 F-250 Super Duty (single rear wheel): 8x170 - these adapters fit\u003c\/li\u003e\n\u003cli\u003e1997-1999 F-250 Light Duty (7 lug): 7x150 - these adapters fit\u003c\/li\u003e\n\u003cli\u003e1967-1997 F-250 (8 lug): 8x6.5, also written 8x165.1 - these adapters fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable conversions in this collection: from the 8x170 Super Duty hub you can adapt to 6x135, 6x5.5, 8x180, 8x6.5, 8x200 for Ford dually wheels, or run 8x170 to 8x170 as a spacer. From 8x6.5 hubs you can adapt to 6x5.5, 8x170, 8x180, 8x200, 8x210, or 8x6.5 to 8x6.5. From the 7x150 Light Duty hub you can adapt to 6x135, 6x5.5, 8x170, 8x6.5, or 7x150 to 7x150.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill F-350 wheels fit my F-250 Super Duty?\u003c\/strong\u003e Single rear wheel F-350 Super Duty trucks from 1999 on share the same 8x170 pattern, so those wheels usually bolt on without an adapter. For Ford dually wheels with the 8x200 pattern, use an 8x170 to 8x200 adapter and verify before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run Chevy, GMC, or Ram 8 lug wheels on my Super Duty?\u003c\/strong\u003e Yes. Older GM and Dodge 8 lug wheels are 8x6.5, and newer GM 8 lug wheels are 8x180, so an 8x170 to 8x6.5 or 8x170 to 8x180 adapter makes them fit. Confirm the wheel's pattern and center bore first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does my late 90s F-250 have 7 lugs?\u003c\/strong\u003e The 1997-1999 F-250 Light Duty used a unique 7x150 pattern that no other wheels share. A 7x150 adapter lets you run common 6 lug or 8 lug wheels instead; verify your exact pattern before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003eFree US shipping on all wheel adapters, shipped from our Los Angeles warehouse.\u003c\/p\u003e","products":[{"product_id":"wheel-adapter-7-lug-150-to-6-lug-135-thickness-2-pair","title":"Wheel Adapter 7 Lug 150 To 6 Lug 135 Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFit 6x135 Bolt Pattern Chevy Wheels On 7 Lug Ford\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are used for 7x150mm bolt pattern cars to fit 6 Lug 135mm bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2\" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMost Popular Applications:\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBolt on 7 Lug Vehicles Below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e7 Lug Ford F150\u003cbr data-mce-fragment=\"1\"\u003e 7 Lug Ford F250\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTo Fit 6x135 Bolt Pattern Wheels or Wheels From Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Lincoln Navigator\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Ford F-150\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Ford Expedition\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to a 7x150mm (7-lug) hub so you can run 6x135mm (6-lug) wheels\u003c\/li\u003e\n\u003cli\u003eConverts a 7-lug hub to a 6-lug wheel pattern\u003c\/li\u003e\n\u003cli\u003e2 inch thickness, which pushes the wheels outward for a noticeably wider track\u003c\/li\u003e\n\u003cli\u003eSold as a pair, ships free in the US\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSeat each adapter flat against a clean hub and torque the studs to your vehicle's factory specification, referring to our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-torque after 50 to 100 miles. If your factory studs extend past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when seated flat on the hub, torqued to spec, re-torqued after the initial short drive, and with full stud and thread engagement on both faces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I reuse my factory lug hardware?\u003c\/strong\u003e\u003cbr\u003eThe adapter mounts to your existing 7x150mm studs, then supplies its own 6-lug studs for the wheel, so the wheel side uses the hardware built into the adapter.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 87.1mm","offer_id":47734544990489,"sku":"7150-6135T-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5to6.webp?v=1773853648"},{"product_id":"wheel-adapter-7-lug-150-to-6-lug-5-5-thickness-2-pair","title":"Wheel Adapter 7 Lug 150 To 6 Lug 5.5\" Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFit 6x5.5 Bolt Pattern Chevy Wheels On 7 Lug Ford\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are used for 7x150mm bolt pattern cars to fit 6 Lug 5.5\" (139.7mm) bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2\" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMost Popular Applications:\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBolt on 7 Lug Vehicles Below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e7 Lug Ford F150\u003cbr data-mce-fragment=\"1\"\u003e 7 Lug Ford F250\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTo Fit 6x5.5 Bolt Pattern Wheels or Wheels From Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Blazer\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Mitsubishi\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Silverado\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Suburban\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Tahoe\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to a 7x150mm (7-lug) hub so you can run 6x5.5in (139.7mm) wheels\u003c\/li\u003e\n\u003cli\u003eConverts a 7-lug pattern to a 6-lug pattern\u003c\/li\u003e\n\u003cli\u003e2 inch thickness widens the track on both sides\u003c\/li\u003e\n\u003cli\u003eSold in pairs, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount each adapter on a clean, flat hub and tighten the studs to your vehicle's factory specification using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Re-torque after 50 to 100 miles. Trim any factory stud that reaches past the adapter face so the wheel can seat flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes. Seated flat, torqued to spec, re-torqued after a short first drive, and with full stud and thread engagement on each side, they perform dependably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm my hub pattern before buying?\u003c\/strong\u003e\u003cbr\u003eMeasure your hub studs against the 7x150mm applications listed in the description above, and make sure your wheels use the 6x5.5in (139.7mm) pattern.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 87.1mm","offer_id":47734544662809,"sku":"7150-6550S-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/7150-6550S-2_34c1d208-da68-4ee7-a2c5-2e6f942d48aa.jpg?v=1692204287"},{"product_id":"wheel-adapter-7-lug-150-to-7-lug-150-thickness-1-5-pair","title":"Wheel Adapter 7 Lug 150 To 7 Lug 150 Thickness 1.5\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 7 lug 150mm bolt pattern cars to fit 7 lug 150mm bolt pattern wheels. CNC machined billet aluminum and 1.5\" in thickness. New wheel studs and open end lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSame-pattern adapter: bolts to your 7x150mm hub and keeps the 7x150mm pattern on the wheel side\u003c\/li\u003e\n\u003cli\u003e1.5\" thickness, working as a spacer that adds track width\u003c\/li\u003e\n\u003cli\u003eCNC machined billet aluminum\u003c\/li\u003e\n\u003cli\u003eNew wheel studs and open end lug nuts included\u003c\/li\u003e\n\u003cli\u003eSold as a pair (2 adapters) with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSeat each adapter flat against a clean hub face and torque the included open end lug nuts to spec, then mount your wheel on the new studs. Use our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e for the correct values, and re-torque all hardware after 50 to 100 miles of driving.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when installed correctly. The adapter must sit completely flat on the hub, every nut torqued to spec with full thread engagement on the studs, and hardware re-checked after 50 to 100 miles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a same-pattern adapter do?\u003c\/strong\u003e\u003cbr\u003eBecause the bolt pattern stays 7x150mm on both sides, this works as a 1.5\" spacer. Each wheel moves outward by the adapter's thickness, giving your truck a wider track and a wider stance while your existing 7-lug wheels bolt right back on.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x2.0 \/ 87.1mm","offer_id":47734544433433,"sku":"7150-7150J-15","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/8650-8650C-2_ac035bd0-6a89-4dd1-8b02-e4ca701be40c.jpg?v=1692204291"},{"product_id":"hub-centric-wheel-adapter-7x150-to-8x170-thickness-2-pair","title":"Hub Centric Wheel Adapter 7x150 To 8x170 Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 7 lug 150 bolt pattern truck to fit 8 lug 170 bolt pattern wheels. CNC machined billet aluminum and 2\" in thickness. New wheel studs are included. Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHub centric design for a snug fit on both the vehicle and factory wheels. Chance of vibration is eliminated.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat 7 lug vehicles do these adapters fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: 7 Lug F150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWhat 8 lug wheels do they fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll 8x170mm bolt pattern wheels, factory and after market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll factory wheels from 8 lug Ford F250, F350 (1999-on)\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eExamples of applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePutting 8 lug F250 (1999) wheels on 6 lug F150 axle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePutting 8 lug F350 (2016) wheels on 6 lug Ford Expedition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-piece conversion type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHub centric to hub and wheel centric to factory wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTrue aircraft quality 6061 T6 billet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC precision machined\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePressed-in through hardened steel studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca rel=\"noopener\" href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to a 7x150mm hub pattern\u003c\/li\u003e\n\u003cli\u003eRuns wheels drilled 8x170mm\u003c\/li\u003e\n\u003cli\u003e2\" per-side thickness adds track width\u003c\/li\u003e\n\u003cli\u003eHub centric for a precise, vibration-free seat\u003c\/li\u003e\n\u003cli\u003ePair, ships free within the US\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your 7x150mm hub so you can fit 8x170mm wheels. Mount them on a clean hub face, torque to your vehicle's factory specification with help from the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after 50 to 100 miles. Any factory studs that poke past the adapter face should be shortened so the wheel sits flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eThey are, provided each one sits flat on a clean hub, is torqued to spec, re-torqued after a short drive, and has full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eYes. They take a 7x150mm hub and let you bolt on 8x170mm wheels, matched to the vehicles listed in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 87.1mm","offer_id":47734544335129,"sku":"7150-8170HBP-20","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/products\/7150-8170HBP-2_ec7543a2-f1c8-42dc-a378-0211b8f1881c.jpg?v=1692204298"},{"product_id":"wheel-adapter-7-lug-150-to-8-lug-6-5-thickness-2-pair","title":"Wheel Adapter 7 Lug 150 To 8 Lug 6.5\" Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFit 8x6.5 Bolt Pattern Chevy Wheels On 7 Lug Ford\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are used for 7x150mm bolt pattern cars to fit 8 Lug 6.5\" (165mm) bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2\" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMost Popular Applications:\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBolt on 7 Lug Vehicles Below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e7 Lug Ford F150\u003cbr data-mce-fragment=\"1\"\u003e 7 Lug Ford F250\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTo Fit 8x6.5 Bolt Pattern Wheels or Wheels From Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e 8 Lug Chevy Silverado 99-10\u003cbr data-mce-fragment=\"1\"\u003e 8 Lug Chevy Suburban 89-14\u003cbr data-mce-fragment=\"1\"\u003e Ford F-250 80-98\u003cbr data-mce-fragment=\"1\"\u003e Ford F-350 82-98\u003cbr data-mce-fragment=\"1\"\u003e 8 Lug Dodge Ram\u003cbr data-mce-fragment=\"1\"\u003e Chevy C2500\u003cbr data-mce-fragment=\"1\"\u003e Chevy K20 2500 3500\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle hub side: 7x150mm\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x6.5\" (165.1mm)\u003c\/li\u003e\n\u003cli\u003eAdapter thickness: 2\"\u003c\/li\u003e\n\u003cli\u003eConverts a 7x150mm hub to accept 8x6.5\" wheels\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your 7x150mm hub so you can run 8x6.5\" (165.1mm) wheels, and the 2\" thickness pushes the wheel outward for a wider stance at the same time. Torque the hardware to your vehicle's factory specification using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after 50 to 100 miles. If your factory studs protrude past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat against a clean hub, are torqued to spec, re-torqued after the first short drive, and have full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eThey suit the applications shown in the description above. Confirm your hub measures 7x150mm before ordering.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 87.1mm","offer_id":47734543843609,"sku":"7150-8650W-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/5-Lug-6-Lug-to-8-Lug-Watermark_01_c9e4c899-ed8b-4f4c-be47-26b66f9e6f8e.png?v=1747238236"},{"product_id":"wheel-adapter-8-lug-170-to-6-lug-135-thickness-2-pair","title":"Wheel Adapter 8 Lug 170\" To 6 Lug 135 Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFit 6x135 Bolt Pattern Ford Wheels On 8 Lug Ford\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are used for 8x170mm bolt pattern cars to fit 6 Lug 135mm bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2\" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMost Popular Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBolt on 8 Lug Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFord F-250 99-on\u003cbr data-mce-fragment=\"1\"\u003e Ford F-350 98-on\u003cbr data-mce-fragment=\"1\"\u003e Ford Excursion\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTo Fit 6x135 Bolt Pattern Wheels or Wheels From Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Lincoln Navigator\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Ford F-150\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Ford Expedition\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eNote: These will not fit on the rear of 4WD or any locking hub.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle hub side: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side: 6x135mm\u003c\/li\u003e\n\u003cli\u003eAdapter thickness: 2\"\u003c\/li\u003e\n\u003cli\u003eChanges an 8x170mm hub to a 6x135mm wheel pattern\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese let an 8x170mm hub bolt up to 6x135mm wheels, and the 2\" thickness widens the track at the same time. Set them against a clean hub face, torque the hardware to your vehicle's factory specification using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. Any factory studs that reach past the adapter face should be trimmed so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, provided they seat flat on the hub, are torqued to spec, get re-torqued after the first short drive, and keep full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know these fit?\u003c\/strong\u003e\u003cbr\u003eThey match the applications listed in the description above. Verify your hub is 8x170mm and your wheels are 6x135mm before buying.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x2.0 \/ 125.6mm","offer_id":47734543122713,"sku":"8170-6135L-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8650-6550.jpg?v=1747345956"},{"product_id":"wheel-adapter-8-lug-170-to-6-lug-5-5-thickness-2-pair","title":"Wheel Adapter 8 Lug 170\" To 6 Lug 5.5\" Thickness 2\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFit 6x5.5 Bolt Pattern Chevy Wheels On 8 Lug Ford\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese are used for 8x170mm bolt pattern cars to fit 6 Lug 5.5\" (139.7mm) bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2\" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMost Popular Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBolt on 8 Lug Vehicles Below:\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFord F-250 99-on\u003cbr data-mce-fragment=\"1\"\u003e Ford F-350 98-on\u003cbr data-mce-fragment=\"1\"\u003e Ford Excursion\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eTo Fit 6x5.5 Bolt Pattern Wheels or Wheels From Vehicles Below:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Blazer\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Mitsubishi\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Silverado\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Suburban\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Chevy Tahoe\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Toyota\u003cbr data-mce-fragment=\"1\"\u003e 6 Lug Nissan Frontier Up To 04\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eNote: These will not fit on the rear of 4WD or any locking hub.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou can view installation instruction document online \u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHow To Install 2 Piece Conversion Adapters\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle hub side: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side: 6x5.5\" (139.7mm)\u003c\/li\u003e\n\u003cli\u003eAdapter thickness: 2\"\u003c\/li\u003e\n\u003cli\u003eAdapts an 8x170mm hub to run 6x5.5\" wheels\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese make an 8x170mm hub accept 6x5.5\" (139.7mm) wheels, and the 2\" thickness adds track width for a wider stance. Mount them flat on a clean hub, torque the hardware to your vehicle's factory specification with our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. If your factory studs protrude past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat against a clean hub, are torqued to spec, re-torqued after a short drive, and have full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich wheels will bolt on?\u003c\/strong\u003e\u003cbr\u003eAny wheel with a 6x5.5\" (139.7mm) pattern. Confirm your hub is 8x170mm and match the applications in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":47734541910297,"sku":"8170-6550K-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8650-6550.jpg?v=1747345956"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-170-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 170 To 8 Lug 170 (Pair) 14x1.5 Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-on), Excursion (03-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt pattern: 8x170mm hub to 8x170mm wheel\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eSame pattern in and out, so they add track width\u003c\/li\u003e\n\u003cli\u003eSold in pairs, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith 8x170mm on both sides, these work as spacers that move the wheels outward for a wider stance rather than changing your pattern, and they carry 14x1.5 studs for the new wheels. Torque everything to your vehicle's factory specification using our \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after 50 to 100 miles. If your factory studs extend past the spacer face, shorten them so the wheel sits flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre these spacers safe to run?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat on a clean hub, are torqued to spec, re-torqued after a short drive, and have full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat lug nuts do I need?\u003c\/strong\u003e\u003cbr\u003eThe adapter uses 14x1.5 studs, so match your outer wheel nuts to a 14x1.5 thread. Confirm your hub is 8x170mm as shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325685551385,"sku":"8170-8170A-15","price":109.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46325685584153,"sku":"8170-8170A-20","price":124.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325685616921,"sku":"8170-8170A-25","price":139.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 14x1.5 \/ 125.6mm","offer_id":46325685649689,"sku":"8170-8170A-30","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/7ee5a050-2166-4e66-95cb-358ffe085e07.png?v=1707866686"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-170-pair-14x2-stud","title":"Wheel Adapter 8 Lug 170 To 8 Lug 170 (Pair) 14x2 Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx2 (coarse). Studs length outside adapter are about 1.6\". CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (99-02), Excursion (99-02)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x2\u003c\/li\u003e\n\u003cli\u003eSame pattern in and out, so this set works as a spacer to push the wheels outward and add track width\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSet each adapter flat against a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. If your factory studs stick out past the adapter face, shorten them so the wheel seats flush. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat on the hub, carry full stud and thread engagement, and are torqued to spec and re-torqued after the first short drive. Seating and torque are what matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this change my wheel offset?\u003c\/strong\u003e\u003cbr\u003eYes. Because the pattern is the same on both sides, it acts as a spacer and moves each wheel outward by the adapter thickness, effectively reducing offset and widening your stance.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x2.0 \/ 125.6mm","offer_id":46325685747993,"sku":"8170-8170B-15","price":109.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x2.0 \/ 125.6mm","offer_id":46325685780761,"sku":"8170-8170B-20","price":124.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 14x2.0 \/ 125.6mm","offer_id":46325685813529,"sku":"8170-8170B-25","price":139.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 14x2.0 \/ 125.6mm","offer_id":46325685846297,"sku":"8170-8170B-30","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/7ee5a050-2166-4e66-95cb-358ffe085e07_ea937e25-3934-43b9-92a4-47a44fa8e5cf.png?v=1707866688"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-170-pair-hub-centric-front","title":"Wheel Adapter 8 Lug 170 To 8 Lug 170 (Pair) Hub Centric Front","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx1.5 (fine thread). Studs length outside adapter are about 1.6\". CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-On), Excursion (03-On)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eMatching pattern both sides adds track width like a spacer, with a hub centric seat\u003c\/li\u003e\n\u003cli\u003eBuilt for the front axle on the applications shown in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount each adapter flush on a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification with help from the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Any factory studs that protrude past the adapter face must be shortened so the wheel seats flat. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, provided they sit flat on the hub with full stud and thread engagement and are torqued to spec, then re-torqued after a short first drive. Proper seating is the key.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this listed as front?\u003c\/strong\u003e\u003cbr\u003eFront and rear hubs can differ, so each piece is matched to its axle. This set is built for the front; pair it with the matching rear set if you are doing all four corners.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2.\" \/ 14x1.5 \/ 125.1mm","offer_id":47734541615385,"sku":"8170-8170HE-20","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8-Lug-HubCentric-Watermark_01_114ef649-9239-4ac2-b948-d0e5ebc1cb8a.png?v=1708026898"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-170-pair-hub-centric-rear","title":"Wheel Adapter 8 Lug 170 To 8 Lug 170 (Pair) Hub Centric Rear","description":"\u003cp data-mce-fragment=\"1\"\u003eHub centric type adapter used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-on), Excursion (03-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: These fit on the rear of Super Duty or Excursion. Use our 8170-8170HE for the front axle.\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eMatching pattern both sides adds track width like a spacer, with a hub centric seat\u003c\/li\u003e\n\u003cli\u003eBuilt for the rear axle on the applications shown in the description above\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount each adapter flush on a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. Factory studs that extend past the adapter face need to be shortened so the wheel seats flat. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they seat flat on the hub with full stud and thread engagement and are torqued to spec, then re-torqued after a short first drive. Proper seating is what keeps them secure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does it specify rear?\u003c\/strong\u003e\u003cbr\u003eRear and front hubs can differ, so each piece is matched to its axle. This set fits the rear; use the matching front set if you are converting all four wheels.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.3mm","offer_id":47734541517081,"sku":"8170-8170HR-20","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8-Lug-HubCentric-Watermark_01.png?v=1708026891"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-180-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 170 To 8 Lug 180 (Pair) 14x1.5 Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 180mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following trucks, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-on), Excursion (03-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side bolt pattern: 8x180mm\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eBolts to your 8x170mm hub so you can run 8x180mm wheels\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSeat each adapter flat on a clean hub with full stud and thread engagement, then torque the hardware to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e. If factory studs reach past the adapter face, shorten them so the wheel can seat flush. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, as long as the adapter sits flat against the hub with full stud and thread engagement and is torqued to spec, then re-torqued after the first short drive. Correct seating and torque are what count.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this let me change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eYes. Your hub stays 8x170mm while the outer face is 8x180mm, so you can bolt on 8x180mm wheels that would not otherwise fit your existing hub.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325686632729,"sku":"8170-8180G-15","price":114.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46325686665497,"sku":"8170-8180G-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1.png?v=1707867156"},{"product_id":"wheel-adapter-8-lug-170-to-8-lug-6-5-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 170 To 8 Lug 6.5\" (Pair) 14x1.5 Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 6.5\" (165mm) bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following trucks, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-on), Excursion (03-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub side bolt pattern: 8x170mm\u003c\/li\u003e\n\u003cli\u003eWheel side bolt pattern: 8x6.5\" (8x165.1mm)\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eBolts to your 8x170mm hub so you can run 8x6.5\" wheels\u003c\/li\u003e\n\u003cli\u003eSold as a pair, with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlace each adapter flush against a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification with the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e as your guide. Trim any factory studs that stick past the adapter face so the wheel seats flat. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they rest flat on the hub with full stud and thread engagement and are torqued to spec, then re-torqued after a short drive. Seating and torque do the work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 8x170mm and 8x6.5\"?\u003c\/strong\u003e\u003cbr\u003eThey are two different 8 lug patterns. This adapter mounts on an 8x170mm hub and gives you an 8x6.5\" (8x165.1mm) face, letting you fit wheels drilled for that pattern.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325686927641,"sku":"8170-8650Q-15","price":114.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46325686960409,"sku":"8170-8650Q-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1_ee57abc4-1bc1-4fbe-92c1-14b048956c71.png?v=1707867496"},{"product_id":"wheel-adapter-8-lug-6-5-to-6-lug-5-5-thickness-2-pair","title":"Wheel Adapter 8 Lug 6.5\" To 6 Lug 5.5 Thickness 2\" (Pair)","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-sheets-hyperlinkruns='{\"1\":609,\"2\":\"http:\/\/www.ezaccessory.com\/Articles.asp?ID=136\"}{\"1\":651}{\"1\":830,\"2\":\"https:\/\/ezaccessory.com\/pages\/wheel-thread-size-bolt-pattern-reference\"}{\"1\":852}' data-sheets-textstyleruns='{\"1\":0,\"2\":{\"5\":1,\"9\":1}}{\"1\":13}{\"1\":166,\"2\":{\"5\":1,\"9\":1}}{\"1\":180}{\"1\":271,\"2\":{\"5\":1,\"9\":1}}{\"1\":281}{\"1\":326,\"2\":{\"5\":1,\"9\":1}}{\"1\":338}{\"1\":341,\"2\":{\"2\":{\"1\":2,\"2\":8724492},\"5\":1,\"6\":1}}{\"1\":348,\"2\":{\"6\":1}}{\"1\":349}{\"1\":357,\"2\":{\"2\":{\"1\":2,\"2\":8724492},\"5\":1,\"6\":1}}{\"1\":364,\"2\":{\"6\":1}}{\"1\":365}{\"1\":374,\"2\":{\"2\":{\"1\":2,\"2\":8724492},\"5\":1,\"6\":1}}{\"1\":381,\"2\":{\"6\":1}}{\"1\":382}{\"1\":389,\"2\":{\"5\":1,\"9\":1}}{\"1\":395}{\"1\":609,\"2\":{\"2\":{\"1\":2,\"2\":1136076},\"9\":1}}{\"1\":651}{\"1\":830,\"2\":{\"2\":{\"1\":2,\"2\":1136076},\"9\":1}}{\"1\":852}' data-sheets-userformat='{\"2\":1053633,\"3\":{\"1\":0},\"9\":0,\"10\":2,\"11\":4,\"12\":0,\"15\":\"Proxima Nova\",\"23\":1}' data-sheets-value=\"{\" accessory wheel adapter is used to adapt bolt-pattern cars fit your aftermarket wheels. lug bolt pattern: thickness: new studs are included. t6 billet aluminum finish: chrome fit: chevy toyota dodge for some locking hubs these adapters will not work. normally stick out a few inches and protrude outside the inner piece thus allowing outer be installed. how install conversion we recommend that nuts should make at least seven turns or until wheels secured perform periodic check ensure they torqued accordingly. our application guide page answer most of fitment questions data-sheets-root=\"1\"\u003e\u003cspan\u003eEZAccessory's wheel adapter is used to adapt 8-lug 6.5\" (165.1mm) bolt-pattern cars to fit your aftermarket 6-lug 5.5\" (139.7mm) bolt-pattern wheels.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e+ Thickness: 2\"\u003cbr\u003e+ New wheel studs are included.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e+ T6 6061 Billet Aluminum\u003cbr\u003e+ Finish: Chrome\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTips\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e+ For some 4WD locking hubs, these adapters will NOT work. These hubs normally stick out a few inches and will protrude outside the inner piece adapter, thus not allowing the outer piece adapter to be installed.\u003cbr\u003e+ \u003c\/span\u003e\u003ca href=\"https:\/\/ezaccessory.com\/pages\/install-2-piece-conversion-adapters\" target=\"_blank\" title=\"How to Install 2 Piece Conversion Adapters\" rel=\"noopener\"\u003e\u003cspan\u003eHow to install 2-piece conversion adapters\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e+ We recommend that your lug nuts should make at least seven turns or until the wheels are secured\u003cbr\u003e+ Perform a periodic check to ensure that they are torqued accordingly. \u003cbr\u003e+ Our \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/ezaccessory.com\/pages\/wheel-thread-size-bolt-pattern-reference\" class=\"in-cell-link\" target=\"_blank\"\u003eapplication guide page\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e will answer most of your application fitment questions!\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cimg data-mce-fragment=\"1\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/EZA_Not-Fit-Manual-Locking-Hubs_Final_480x480.png?v=1707871349\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/EZA_Not-Fit-Manual-Locking-Hubs_Final_480x480.png?v=1707871349\"\u003e\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8-to-6 lug wheel adapter, sold in pairs\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5\" (8x165.1mm)\u003c\/li\u003e\n\u003cli\u003eWheel side: 6x5.5\" (6x139.7mm)\u003c\/li\u003e\n\u003cli\u003eThickness: 2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis 2\" adapter bolts to your 8x6.5\" (8x165.1mm) hub so you can run 6x5.5\" (6x139.7mm) wheels. Seat it flat on a clean hub, torque the hardware to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. If factory studs protrude past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when seated flat against a clean hub, torqued to spec, re-torqued after the first drive, and with full thread engagement on every stud. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this change my lug count?\u003c\/strong\u003e\u003cbr\u003eYes. It mounts to an 8x6.5\" hub and provides a 6x5.5\" face, letting you run 6-lug wheels on an 8-lug hub.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":47734539452697,"sku":"8650-6550A-20","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8650-6550.jpg?v=1747345956"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-180-pair","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 180 (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.5\" (165mm) bolt pattern on many recent Chevy cars\u0026amp;trucks to fit 8 lug 180mm bolt pattern wheels. Adapter studs are 14mmx1.5. They will allow you to put rims off the latest Chevy\/GMC single wheel pickups (2011 and after) onto older Chevy, GMC (prior to 2011), Dodge, etc with bolt pattern of 8x6.5\". New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters are CNC machined out of 6061 T6 billet aluminum. Drive with ease of mind as our premium materials and machining ensure durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, shortening the factory studs is required. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWheel adapter set, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x180mm bolt pattern\u003c\/li\u003e\n\u003cli\u003eLets an 8x6.5 hub run 8x180mm wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach adapter mounts to your 8x6.5 inch hub and gives you an 8x180mm face, so a wheel that would not otherwise line up now bolts on and gains a little track width. Bring everything up to your vehicle's factory torque specification, use the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e to confirm the value, and re-torque after 50 to 100 miles. Any factory studs that protrude past the adapter must be trimmed so the wheel seats flat.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eThey are when mounted flush on a clean hub, torqued to spec, re-torqued after the first drive, and carrying full thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat do these change?\u003c\/strong\u003e\u003cbr\u003eThey convert an 8x6.5 inch (8x165.1mm) hub to an 8x180mm pattern. Verify your hub pattern against the applications shown in the description above before ordering.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325693186329,"sku":"8650-8180T-15","price":114.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46325693219097,"sku":"8650-8180T-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1_69dd8008-0ac8-4177-9a20-89652bf899c4.png?v=1707867685"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-200-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 200 (Pair) 14x1.5 For Single Wheels","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.5\" (165mm) bolt pattern Chevy, Ford or Dodge trucks to fit some Ford Super Duty 8x200 single wheels and latest Dodge 3500 4000 with 8x200 bolt pattern single wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**These will not make dually conversions and will NOT fit dually wheels.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWheel adapter set, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x200mm bolt pattern\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eSet up to run single wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt onto your 8x6.5 inch hub and present an 8x200mm face for a single-wheel setup, adding some track width as they space the wheel outward. Torque both the adapter studs and the wheel to your vehicle's factory specification, referring to the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. Shorten any factory studs that reach past the adapter face so the wheel can seat flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, provided they seat flat on a clean hub, are torqued to spec, re-torqued after the first miles, and run full stud and thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich vehicles do these work with?\u003c\/strong\u003e\u003cbr\u003eAny with a genuine 8x6.5 inch (8x165.1mm) hub needing an 8x200mm single-wheel pattern. Confirm your hub against the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":47734538240281,"sku":"8650-8200S-20","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1_eaeb364f-be20-4957-9f8a-e3fcddaa83ed.png?v=1707867743"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-210-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 210 (Pair) 14x1.5 Stud For Single Wheels","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.5\" (165mm) bolt pattern Chevy, Ford or Dodge trucks to fit new Chevy 8x210mm bolt pattern single wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**They will not make dually conversions and will NOT fit dually wheels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWheel adapter set, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x210mm bolt pattern\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eBuilt to run single wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach adapter fastens to your 8x6.5 inch hub and converts it to an 8x210mm face for a single-wheel fitment, spacing the wheel out for extra track width. Torque the studs and wheel to your vehicle's factory specification, use the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e to confirm the number, and re-torque after 50 to 100 miles. If factory studs extend past the adapter, trim them so the wheel sits flat against the face.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they mount flush on a clean hub, are torqued to spec, re-torqued after the first drive, and keep full thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I confirm the fit?\u003c\/strong\u003e\u003cbr\u003eYour vehicle needs a true 8x6.5 inch (8x165.1mm) hub, and the target wheel needs an 8x210mm pattern. Cross-check with the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":47734538043673,"sku":"8650-8210U-20","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1_71da7595-af4e-49b1-80e4-96d7e00dd37c.png?v=1707867789"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-6-5-pair-14x1-5-studs","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 6.5\" (Pair) 14x1.5 Studs","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.50\" (165mm) bolt pattern many recent Chevy cars\/trucks to fit 8 lug 6.50\" (165mm) bolt pattern wheels. Adapter studs are 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChevrolet\/GMC: C2500\/C3500-K2500 2\/4WD (88-04), C1500HD-K1500HD 2\/4WD (01-10), Avalanche 2500 2\/4WD (01-10), Suburban 2500 2\/4WD (01-10), H2 (03-10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDodge: RAM 2500-3500 2\/4WD (2012-on)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to an 8x6.5\" (165.1mm) hub and mounts 8x6.5\" (165.1mm) wheels\u003c\/li\u003e\n\u003cli\u003eMatching pattern front and back, so it acts as a spacer to widen track width\u003c\/li\u003e\n\u003cli\u003e14x1.5 studs\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eFree US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSet each adapter flat against a clean hub with full thread engagement, then torque the hardware to your vehicle's factory specification and use the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e for a starting point. If any factory studs poke past the adapter face, shorten them so the wheel can seat flush. Re-torque after 50 to 100 miles.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat against the hub, are torqued to spec with full stud and thread engagement, and get re-torqued after the first short drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill my wheels still bolt up the same way?\u003c\/strong\u003e\u003cbr\u003eYes. The pattern stays 8x6.5\" (165.1mm) on both sides, so this simply moves your existing wheels outward for more track width.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1' \/ 14x1.5 \/ 125.6mm","offer_id":46325693874457,"sku":"8650-8650C-10","price":104.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325693907225,"sku":"8650-8650C-15","price":109.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46325693939993,"sku":"8650-8650C-20","price":124.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46325693972761,"sku":"8650-8650C-25","price":139.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 14x1.5 \/ 125.6mm","offer_id":46325694005529,"sku":"8650-8650C-30","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8WheelAdapters_01.png?v=1708027006"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-6-5-pair-9-16-stud","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 6.5\" (Pair) 9\/16\" Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.50\" (165mm) bolt pattern Dodge, older Ford (prior to 1999) or some older Chevy trucks to fit 8 lug 6.50\" (165mm) bolt pattern wheels. Adapter stud size 9\/16\"-18. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDodge: RAM 2500-3500 2\/4WD (94-2011)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 2\/4WD (80-98)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChevy: 3\/4 \u0026amp; 1 Ton K20 K30 C20 C30 (65-87) (some may use 1\/2\" studs)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits an 8x6.5\" (165.1mm) hub and accepts 8x6.5\" (165.1mm) wheels\u003c\/li\u003e\n\u003cli\u003eSame bolt pattern in and out, adding track width like a spacer\u003c\/li\u003e\n\u003cli\u003e9\/16\" studs\u003c\/li\u003e\n\u003cli\u003eComes as a pair\u003c\/li\u003e\n\u003cli\u003eFree US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount each piece flush to a clean hub face with full thread engagement, then bring the hardware to your vehicle's factory specification; the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e is there if you want a reference. Factory studs that protrude past the adapter face need to be shortened so the wheel seats flat. Re-torque after 50 to 100 miles of driving.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eThey are when seated flat against the hub, torqued to spec with full stud and thread engagement, and re-torqued after a short initial drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this change my wheel fitment pattern?\u003c\/strong\u003e\u003cbr\u003eNo. It stays 8x6.5\" (165.1mm) on both sides, so your current wheels bolt on while the track gets wider.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1' \/ 9\/16\" \/ 125.6mm","offer_id":46325694202137,"sku":"8650-8650D-10","price":104.95,"currency_code":"USD","in_stock":true},{"title":"1.5\" \/ 9\/16\" \/ 125.6mm","offer_id":46325694234905,"sku":"8650-8650D-15","price":109.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 9\/16\" \/ 125.6mm","offer_id":46325694267673,"sku":"8650-8650D-20","price":124.95,"currency_code":"USD","in_stock":true},{"title":"2.5\" \/ 9\/16\" \/ 125.6mm","offer_id":46325694300441,"sku":"8650-8650D-25","price":139.95,"currency_code":"USD","in_stock":true},{"title":"3\" \/ 9\/16\" \/ 125.6mm","offer_id":46325694333209,"sku":"8650-8650D-30","price":154.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/7ee5a050-2166-4e66-95cb-358ffe085e07_ea2bbb68-6065-45c6-86ab-2b88191c8190.png?v=1707866698"},{"product_id":"hub-centric-wheel-adapter-8-lug-6-5-to-8-lug-6-5-pair","title":"Hub Centric Wheel Adapter 8 Lug 6.5\" To 8 Lug 6.5\" (Pair)","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of hub centric adapter is used for both 8 lug 6.5\" (165mm) bolt pattern cars to fit 8 lug 6.5\" (1165mm) bolt pattern wheels. CNC machined billet aluminum. New wheel studs and lug nuts are included.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eDodge\u003c\/strong\u003e: RAM 2500-3500 2\/4WD (94-2011)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: These will not fit on the rear of 4WD or any locking hub.\u003cbr data-mce-fragment=\"1\"\u003e \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub and wheel pattern both 8x6.5\" (165mm)\u003c\/li\u003e\n\u003cli\u003eKeeps your existing 8x6.5\" bolt pattern\u003c\/li\u003e\n\u003cli\u003ePushes the wheel outward to add track width\u003c\/li\u003e\n\u003cli\u003eHub centric for a centered, smooth-running fit\u003c\/li\u003e\n\u003cli\u003eSold as a pair with free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the pattern is 8x6.5\" (165mm) on both sides, this piece keeps your bolt pattern and simply spaces the wheel outward for a wider stance. Seat it flat on a clean hub, torque to your vehicle's factory specification using the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. If factory studs protrude past the face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, as long as each sits flat on a clean hub, is torqued to spec, re-torqued after a short drive, and has full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does a same-pattern adapter do?\u003c\/strong\u003e\u003cbr\u003eIt works as a spacer, moving the wheel outward to gain track width without changing your 8x6.5\" pattern.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 9\/16\" \/ 121.2mm","offer_id":47734537552153,"sku":"8650-8650HD-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8-Lug-HubCentric-Watermark_01_b48c90cf-8d9d-4cfe-9bc5-451d7cd9cbe6.png?v=1708026909"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-6-5-pair-1-2-stud","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 6.5\" (Pair) 1\/2\" Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.50\" (165mm) bolt pattern Dodge, older Ford (prior to 1999) or some older Chevy trucks to fit 8 lug 6.50\" (165mm) bolt pattern wheels. Adapter stud size 1\/2\"-20. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following cars, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDodge: 3\/4 Ton, 1 Ton 2\/4WD (46-93)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eChevy: 3\/4 \u0026amp; 1 Ton K20 K30C20 C30 (65-87) (some may use 9\/16\" studs)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250, F350 (55-79) (some may use 9\/16\" studs)\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWheel adapter set, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eStud thread: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003eKeeps the same pattern while spacing wheels outward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the pattern is 8x6.5 inch on both sides, these work as spacers: they keep your existing bolt pattern and push the wheels out for added track width and clearance. Torque the studs and wheels to your vehicle's factory specification, check the value on the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. If your factory studs reach past the adapter face, shorten them so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they seat flat on a clean hub, are torqued to spec, re-torqued after the first miles, and run full stud and thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these change my bolt pattern?\u003c\/strong\u003e\u003cbr\u003eNo. They stay 8x6.5 inch (8x165.1mm) in and out, so their job is added track width rather than a pattern change. Match your hub to the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 1\/2\" \/ 125.6mm","offer_id":46325694464281,"sku":"8650-8650M-15","price":114.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 1\/2\" \/ 125.6mm","offer_id":46325694497049,"sku":"8650-8650M-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/7ee5a050-2166-4e66-95cb-358ffe085e07_dbdfe347-ad29-4cd3-b975-b463a80f9de6.png?v=1707866700"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-170-pair-14x1-5-stud","title":"Wheel Adapter 8 Lug 6.5\" To 8 Lug 170 (Pair) 14x1.5 Stud","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 6.5\" (165mm) bolt pattern Chevy,Ford or Dodge trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1\" and 1.5\" thick adapters.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWheel adapter set, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x170mm bolt pattern\u003c\/li\u003e\n\u003cli\u003eStud thread: 14x1.5\u003c\/li\u003e\n\u003cli\u003eAdapts an 8x6.5 hub to accept 8x170mm wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your 8x6.5 inch hub so you can run 8x170mm wheels, which also pushes the wheels out slightly for added track width. Torque the adapters and wheels to your vehicle's factory specification, check the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. If your factory studs stick out past the adapter face, shorten them so everything seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat on a clean hub, are torqued to spec, re-torqued after the first short drive, and run full stud and thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know these fit?\u003c\/strong\u003e\u003cbr\u003eThey suit any vehicle with a true 8x6.5 inch (8x165.1mm) hub that needs to run an 8x170mm wheel. Match your current hub pattern to the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"1.5\" \/ 14x1.5 \/ 125.6mm","offer_id":46336715686169,"sku":"8650-8170R-15","price":114.95,"currency_code":"USD","in_stock":true},{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":46336715718937,"sku":"8650-8170R-20","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8Lug1_0838743b-6388-466b-84e3-a38c19fe175d.png?v=1707867513"},{"product_id":"hub-centric-wheel-adapter-8x170-to-8x200-14x1-5-stud-for-dual-wheels","title":"Hub Centric Wheel Adapter 8x170 To 8x200 (Pair) 14x1.5 Stud For Dually Wheels","description":"\u003cp data-mce-fragment=\"1\"\u003eThis type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8x200mm bolt pattern single wheels. Hub centric lip built to snug fit 8x200 wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. Hub centric lip height 1\" (25mm) for 8x200 dually wheel to sit on.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese adapters can be used on the following trucks, among others:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFord: F250\/F350 (03-on), Excursion (03-on)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).\u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMounts to an 8x170mm hub\u003c\/li\u003e\n\u003cli\u003eRuns 8x200mm wheels\u003c\/li\u003e\n\u003cli\u003e14x1.5 studs\u003c\/li\u003e\n\u003cli\u003eBuilt for dually wheel setups\u003c\/li\u003e\n\u003cli\u003eHub centric pair, free US shipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your 8x170mm hub so you can run 8x200mm dually wheels on 14x1.5 studs. Mount each on a clean, flat hub, torque to your vehicle's factory specification with the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, then re-torque after 50 to 100 miles. Trim any factory studs that reach past the adapter face so the wheel can seat flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eThey are, when seated flat on a clean hub, torqued to spec, re-torqued after the first short drive, and running full stud and thread engagement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these the right fit for a dually?\u003c\/strong\u003e\u003cbr\u003eThey convert an 8x170mm hub to 8x200mm wheels for dual-wheel trucks matching the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 125.6mm","offer_id":50345286697241,"sku":"8170-8200HWE-20","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8-lug-hub-centric-high-lip.png?v=1747160031"},{"product_id":"wheel-adapter-8-lug-6-5-to-8-lug-210-pair-14x1-5-stud-for-single-wheels-copy","title":"Hub Centric Wheel Adapter 8 Lug 6.5\" To 8 Lug 210 (Pair) for Ram \u0026 Chevy\/GMC Dually Wheels","description":"\u003cp\u003e\u003cspan class=\"a-list-item\"\u003eUpgrade your older Chevy \/ GMC\/ RAM 8 lug trucks with this high-quality 8x6.5 to 8x210 hub-centric wheel adapter with 1\" long lip and 121.3mm center bore. Designed for dual-wheel applications, it allows you to safely convert your single wheel older 8x6.5 bolt pattern hub to mount dual wheels from newer dually wheel.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePrecise Fit for older RAM 8 Lug (121.3mm center bore) - Converts 8x6.5 hub pattern to 8x210, ensuring seamless compatibility with dually wheels. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eAlso fits older GMC\/Chevy hub but not perfectly hub centric\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Construction – Made from high-strength 6061-T6 billet aluminum, providing maximum durability and load capacity, perfect for heavy-duty applications\u003c\/li\u003e\n\u003cli\u003eHub-Centric Advantage – Designed with a 121.3mm center bore for a direct hub fit, eliminating gaps between the adapter and hub to enhance stability, minimize stress on wheel studs, and reduce vibrations.\u003c\/li\u003e\n\u003cli\u003eEnhanced Stability \u0026amp; Performance – Widen your vehicle stance for improved traction, handling, and towing capability, making it ideal for heavy-duty applications and off-road use.\u003c\/li\u003e\n\u003cli\u003eEngineered for Safety – Designed to maintain proper wheel alignment and support dually wheels while ensuring long-lasting performance under extreme conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- EZA-FITMENT-v1 --\u003e\n\u003ch3\u003eFitment and specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHub centric wheel adapter, sold as a pair\u003c\/li\u003e\n\u003cli\u003eHub side: 8x6.5 inch (8x165.1mm) bolt pattern\u003c\/li\u003e\n\u003cli\u003eWheel side: 8x210mm bolt pattern\u003c\/li\u003e\n\u003cli\u003eIntended to run Ram and Chevy\/GMC dually wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese bolt to your 8x6.5 inch hub and give you an 8x210mm face so you can mount Ram and Chevy\/GMC dually wheels, while the hub centric design locates the adapter squarely on the hub. Torque the adapter and wheels to your vehicle's factory specification, confirm the value on the \u003ca href=\"\/pages\/torque-reference\"\u003etorque reference chart\u003c\/a\u003e, and re-torque after 50 to 100 miles. Trim any factory studs that protrude past the adapter so the wheel seats flush.\u003c\/p\u003e\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAre wheel adapters safe?\u003c\/strong\u003e\u003cbr\u003eYes, when they sit flat on a clean hub, are torqued to spec, re-torqued after the first drive, and run full thread engagement. Free US shipping is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does hub centric mean here?\u003c\/strong\u003e\u003cbr\u003eIt means the adapter centers precisely on the hub for a smooth, balanced fit. Confirm your 8x6.5 inch (8x165.1mm) hub and the 8x210mm dually wheels against the applications shown in the description above.\u003c\/p\u003e\n\u003c!-- \/EZA-FITMENT-v1 --\u003e","brand":"My Store","offers":[{"title":"2\" \/ 14x1.5 \/ 141.9mm","offer_id":52180770652441,"sku":"‎8650-8210XTU-20","price":184.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0792\/7241\/1417\/files\/8650-8210XTU_main.png?v=1774909717"}],"url":"https:\/\/ezaccessory.com\/collections\/wheel-adapters-for-ford-f-250.oembed","provider":"EZAccessory","version":"1.0","type":"link"}