Wheel Adapter 5x120 To 5x115 (Pair)
| Converts from (hub) | 5x120mm |
|---|---|
| Converts to (wheel) | 5x115mm |
| Center bore | 74.1mm |
| Stud thread | 14x1.5 |
| Thickness | 1" |
| Material | 6061-T6 billet aluminum |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
This type of adapter is used for 5 lug 120mm bolt pattern cars to fit 5 lug 115mm wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. These adapters bolt to the following vehicles (US models):
Vehicle fitment
- Acura: Integra Type S (24-26), MDX (07-13, 17-20, 22-24), RL (05-12), RLX (14-20), TL (09-14), TLX (21-25)
- BMW: 1 Series (08-13), 3 Series (92-12, 17-18, not the 92-93 E30 convertible, which is 4x100), 4 Series (14-20), 5 Series (75-16), 6 Series (77-89, 04-10, 12-17), 7 Series (78-15), 8 Series (91-97), X3 (04-10), X5 (00-06)
- Cadillac: ATS-V (16-19), CT4-V Blackwing (22-25), CT5 (20-26), CT6 (16-20), CTS (08-19), CTS-V (09-19), XT4 (19-25), XTS (13-19)
- Chevrolet: Camaro (10-24), Corvette (20-22), Equinox (10-17), Impala (14-20, not the 14-16 Impala Limited), Malibu (13-15), SS (14-17)
- Honda: Civic Type R (17-21, 23-26), Odyssey (05-26), Passport (19-26), Pilot (09-26), Ridgeline (06-14, 17-26)
- Land Rover: Discovery (99-04), LR3 (05-09), Range Rover (96-02)
- Pontiac: G8 (08-09)
- Saab: 9-5 (10-11)
Hub-side lug nuts or lug bolts are bought separately, in your vehicle's thread. Where the hub uses lug bolts, confirm full thread engagement, fully recessed heads and flush seating.
Our premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Wheel adapters, sold in pairs
- Hub bolt pattern: 5x120mm
- Wheel bolt pattern: 5x115mm
- Converts a 5x120 hub to a 5x115 wheel pattern
- Free US shipping
Bolted to your 5x120mm hub, this pair lets you fit 5x115mm wheels. Seat each adapter flat on a clean hub with full thread engagement, then torque to your vehicle's factory specification with our torque reference chart, and re-torque after 50 to 100 miles. Any factory studs protruding past the adapter face should be shortened so the wheel seats flush.
Common questions
Are wheel adapters safe?
Yes, when mounted flat on a clean hub, torqued to spec with full stud and thread engagement, and re-torqued after the first short drive.
How do I confirm these fit?
Check that your hub measures 5x120mm and that your vehicle is listed in the description above.
Shop related: 5x120 hub wheel adapters