Mag Lug Nuts
Mag Lug Nuts
Mag style lug nuts use a flat washer and a straight shank instead of a tapered seat, made for wheels drilled with flat, mag-style lug holes, including classic Cragar Style designs. Stocked in 12x1.25, 12x1.5, 14x1.5, 14x2, 1/2", 5/8", 7/16", 9/16". A left hand thread version is available in 1/2".
Browse by thread size: 12x1.5, 12x1.25, 14x1.5, 14x2, 7/16", 1/2" and 9/16".
Choosing mag lug nuts
The critical spec on a mag nut is shank length: it must engage the wheel's lug hole without bottoming out against the drum or rotor. We stock standard, short, medium and extended shanks, plus dualie versions with washers for dual rear wheels.
Common questions
How do I know if my wheels need mag seat nuts? Look at the lug hole: a flat counterbore with a straight bore takes a mag nut with washer; a tapered cone-shaped hole takes an acorn style nut instead.
What shank length do I need? Match the shank to your wheel's lug hole depth. The shank should fill the bore without protruding past the wheel mounting face.
Do mag nuts need new washers over time? Reuse washers only if they are flat and uncorroded. A dished or rusted washer changes clamp load, so replace the set when they show wear.
Recommended torque by size is on our torque reference chart; unsure of your size, start with the wheel fitment guide.
Ships from our Los Angeles warehouse.
Filters
Cragar Mag Extended Style Lug Nut 1/2" LH
1/2" Cragar SST style mag LH lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.00" and the total length is 1...
View full detailsCragar Mag Extended Style Lug Nut 1/2"-20
1/2" Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.00" and the total length is 1.90...
View full detailsCragar Mag Extended Style Lug Nut 12x1.25
12x1.25 Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.00" and the total length is 1...
View full detailsCragar Mag Extended Style Lug Nut 12x1.5
12x1.5 Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.00" and the total length is 1....
View full detailsCragar Mag Extended Style Lug Nut 7/16"
The shank length is 1.00" and the total length is 1.90". Please refer the following drawing for exact specification and size. Ford owners need offs...
View full detailsCragar SST Style Mag Lug Nut 1/2" LH
1/2" LH Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.38" and the total length ...
View full detailsCragar SST Style Mag Lug Nut 1/2"-20
1/2" Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.38" and the total length is 2.12...
View full detailsCragar SST Style Mag Lug Nut 12x1.25
12mmx1.25 Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.38" and the total length is...
View full detailsCragar SST Style Mag Lug Nut 12x1.5
12mmx1.5 Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.38" and the total l...
View full detailsCragar SST Style Mag Lug Nut 14x1.5
14x1.5 Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels. 7/8" Hex. The shank length is 1.38" and the total len...
View full detailsCragar SST Style Mag Lug Nut 7/16"-20
7/16" Cragar SST style mag lug nuts with washers that fit Cragar SST/Weld and Racing wheels . The shank length is 1.38" and the total length is 2.1...
View full detailsCragar SST Style Open End Mag Lug Nut 1/2"-20
1/2" Cragar SST open mag style lug nuts with washer. They fit Cragar, Protec, Weld Pro Star and Draglite wheels (excluding the XP series). The shan...
View full detailsCragar SST Style Open End Mag Lug Nut 12x1.25
12x1.25 Cragar SST open mag style lug nuts with washer. They fit Cragar, Protec, Weld Pro Star and Draglite wheels (excluding the XP series). The s...
View full detailsCragar SST Style Open End Mag Lug Nut 12x1.5
12x1.5 Cragar SST open mag style lug nuts with washer. They fit Cragar, Protec, Weld Pro Star and Draglite wheels (excluding the XP series). The sh...
View full detailsCragar SST Style Open End Mag Lug Nut 14x1.50
14x1.50 Cragar SST open mag style lug nuts with washer. 7/8" Hex. Shank diameter is 0.75". They fit Cragar, Protec, Weld Pro Star and Draglite whee...
View full detailsCragar SST Style Open End Mag Lug Nut 7/16"-20
7/16" Cragar SST open mag style lug nuts with washer. They fit Cragar, Protec, Weld Pro Star and Draglite wheels (excluding the XP series). The sha...
View full detailsDome Duplex Mag Style Lug Nut 1/2"-20
1/2" Dome Duplex style mag lug nuts with washers. The shank length is 1" and the total length is 1.85". Shank diameter is 0.75". Please refer the f...
View full detailsDome Duplex Mag Style Lug Nut 14x1.5 Thread
14x1.5 Dome Duplex style mag lug nuts with washers. The shank length is 1" and the total length is 1.85". Shank diameter is 0.75". Please refer the...
View full detailsDome Duplex Mag Style Lug Nut 9/16"
9/16" Dome Duplex style mag lug nuts with washers. The shank length is 1" and the total length is 1.85". Shank diameter is 0.75". Please refer the ...
View full detailsDome Medium Mag Style Lug Nut 1/2"-20
1/2"-20 Dome Medium Mag style mag lug nuts with washers. The shank length is 0.55" and the total length is 1.5". Please refer the following drawing...
View full detailsDome Medium Mag Style Lug Nut 12x1.25 Thread
12x1.25 Thread Dome Medium Mag style mag lug nuts with washers. The shank length is 0.55" and the total length is 1.5". Please refer the following ...
View full detailsDome Medium Mag Style Lug Nut 12x1.50 Thread
12x1.50 Thread Dome Medium Mag style mag lug nuts with washers. The shank length is 0.55" and the total length is 1.5". Please refer the following ...
View full detailsDome Short Mag Style Lug Nut 1/2"-20
1/2"-20 Dome Short Mag style mag lug nuts with washers. The shank length is 0.33" and the total length is 1.50". Please refer the following drawing...
View full detailsDome Short Mag Style Lug Nut 12x1.25 Thread
12x1.25 Thread Dome Short Mag style mag lug nuts with washers. The shank length is 0.33" and the total length is 1.50". Please refer the following ...
View full details