Honda Wheel Spacers

Civic 2006–2026 (not the Type R), Accord 2003–2026, US CR-V 1997–2026 and HR-V 2016–2026 wheel spacers: 5x114.3 (5x4.5"), 12x1.5 thread, 64.1mm hub

Every Honda below uses 5x114.3 with a 12x1.5 thread and a 64.1mm hub, so the same three spacers fit them: the Honda 15mm hub centric slip-on pair (64mm bore, installed with its included extended studs so the lug nuts keep full thread engagement; its 64mm wheel-side lip needs a wheel center bore that accepts it), the 5x4.5" hub centric Honda and Acura bolt-on pair (64.1mm bore, 12x1.5 studs, 1", for factory wheels with a 64.1mm center bore) and the 5x4.5" bolt-on pair with 12x1.5 studs (73mm center bore, 0.75" to 2"). If the factory studs stand proud of a bolt-on pair's face and stop the wheel seating flush, shorten them. These spacers fit:

• Civic 2006–2026 (not the Type R, which is 5x120), Accord 2003–2026, CR-Z 2011–2016, Insight 2019–2022 and Clarity 2017–2021
• US CR-V 1997–2026, HR-V 2016–2026, Element 2003–2011, Pilot 2003–2008 and Crosstour 2010–2015
• Odyssey 1995–2004, US Prelude 1997–2001 and the 2004–2005 Civic Si hatchback, which is the one US Civic of its era on 5x114.3

The 15mm slip-on pair comes with extended wheel studs: its listing says to use the included extended studs to keep full thread engagement through the added 15mm, so install them in place of the factory studs. Its 64mm wheel-side lip needs a wheel center bore that accepts it. For a different wheel pattern, see 5x4.5 hub wheel adapters.

Pilot 2009–2026, Odyssey 2005–2026, Ridgeline 2006–2014 and 2017–2026, Passport 2019–2026 and Civic Type R 2017–2021 and 2023–2026 wheel spacers: 5x120, 14x1.5 thread, 64.1mm hub

The Pilot 2009–2026, Odyssey 2005–2026, Ridgeline 2006–2014 and 2017–2026, Passport 2019–2026 and Civic Type R 2017–2021 and 2023–2026 use 5x120 with a 14x1.5 thread and a 64.1mm hub. Two bolt-on pairs match the pattern and thread: the 5x120 pair with a 67.1mm center bore (14x1.5 studs, 1") and the 5x120 pair with a 72.56mm center bore (14x1.5 studs, 1.25" or 1.5"). Both clear the 64.1mm hub and center on the studs. Whichever pair you choose, the wheel must seat flush on its face; the 67.1mm-bore pair's listing says to shorten any factory stud that stands proud of that pair's face and stops the wheel seating flush. The 2026 Prelude uses 5x120 with M14 lug nuts on the same 64.1mm hub; confirm the thread pitch before ordering. The Passport 1994–2002 is 6x139.7 with a 12x1.5 thread and a 108mm hub and takes the 6x5.5" bolt-on pair with 12x1.5 studs (108mm bore, 0.75" to 3"); if its factory studs stand proud of the pair's face and stop the wheel seating flush, shorten them. The Prologue 2024–2026 uses 6x132; no pair on this page is listed for it.

4x100 wheel spacers for the US Civic 1980–2005 (not the 2004–2005 Si hatchback), gasoline Fit 2007–2020, CRX 1984–1991, Del Sol 1993–1997, Insight 2000–2006 and 2010–2014, and US Prelude 1988–1991: 12x1.5 thread, 56.1mm hub

The US Civic 1980–2005 (except the 2004–2005 Si hatchback and the 1985–1987 4WD wagon), Accord 1982–1989, CRX 1984–1991, Del Sol 1993–1997, gasoline Fit 2007–2020, Insight 2000–2006 and 2010–2014 and US Prelude 1988–1991 use 4x100 with a 12x1.5 thread and a 56.1mm hub. The 56.1mm hub centric 4x100 slip-ons fit them: 5mm, the 8mm flat pair, and the 12mm, 15mm and 20mm pairs with a 56.1mm centering lip your wheel's center bore must accept. For more than 20mm, the 4x100 bolt-on pair (64mm center bore, 12x1.5 studs, 1" to 2") fits the same cars. On a slip-on, check that the studs keep full thread engagement at the thickness you choose and fit longer studs if they fall short; from 12mm up, plan on them. Never shorten the studs on a slip-on (they pass through the spacer and the wheel), and check that closed-end lug nuts do not bottom out. On the bolt-on pair, shorten any factory stud that stands proud of its face and stops the wheel seating flush. The Prelude 1979–1987 is listed as 4x100 with a 12x1.5 thread only in European and Japanese-market data; its hub is not confirmed, and no pair on this page is listed for it. Conversions: 4x100 hub wheel adapters; other makes on the pattern: 4 lug wheel spacers. Before ordering the 8mm flat 4x100 pair, confirm that your vehicle's hub measures 56.1mm.

Accord 1990–1997, four-cylinder Accord 1998–2002 and Prelude 1992–1996 wheel spacers: 4x114.3 (4x4.5"), 12x1.5 thread, 64.1mm hub

The Accord 1990–1997, four-cylinder Accord 1998–2002 and Prelude 1992–1996 use 4x114.3 with a 12x1.5 thread and a 64.1mm hub. They take the 4x4.5" bolt-on pair (73mm center bore, 12x1.5 studs, 1" to 2"). If the factory studs stand proud of that pair's face and stop the wheel seating flush, shorten them. The 1998–2002 Accord V6 is five-lug, so count the lugs on an Accord of those years before ordering.

How to choose a Honda spacer: slip-on or bolt-on, thread, hub bore and thickness

Slip-on spacers slide over existing wheel studs like a thick washer, ideal for thin adjustments. Bolt-on spacers bolt directly to factory studs using separate hardware and feature their own integrated studs to mount the wheel, ideal for wider setups. Hub centric is an attribute of both types: the 64.1mm and 56.1mm bores here match the Honda hubs, so the hub, not the studs, centers the spacer.

• Thread: 12x1.5 on every 5x114.3, 4x100 and 4x114.3 Honda; 14x1.5 on the 5x120 Pilot 2009–2026, Odyssey 2005–2026, Ridgeline 2006–2014 and 2017–2026, Passport 2019–2026 and Civic Type R 2017–2021 and 2023–2026. A bolt-on pair's studs must carry your vehicle's thread. On a hub with wheel studs, your own lug nuts clamp the pair to the hub; on a hub with lug bolts, the hub-side bolts are bought separately in your car's thread and seat, because bolt-on spacers do not include lug bolts. The wheel then mounts on the pair's studs with the lug nuts named in that pair's listing, or with lug nuts that match its stud thread if the listing names none.
• Hub bore: 64.1mm on every five-lug Honda here, 56.1mm on the 4x100 cars named above (not confirmed on the Prelude 1979–1987), 108mm on the 1994–2002 Passport. A hub centric pair's bore matches the hub; a lug centric pair's center bore only has to clear it. If your Honda is not named above, measure the hub, or measure your bolt pattern if you are unsure of it.
• Thickness available: slip-on 5mm to 20mm (4x100; the 12mm, 15mm and 20mm have a 56.1mm lip your wheel's center bore must accept) and 15mm (5x114.3, installed with its included extended studs; its 64mm wheel-side lip needs a wheel center bore that accepts it); bolt-on 1" (64.1mm hub centric, for factory wheels with a 64.1mm center bore), 0.75" to 2" (5x4.5" 12x1.5 pair), 1" to 2" (4x100 and 4x4.5" pairs), 1" to 1.5" (5x120 pairs), 0.75" to 3" (6x5.5" pair, Passport 1994–2002). Start with the thinnest that clears; on a slip-on, keep full thread engagement at that thickness, fitting longer studs if they fall short; never shorten the studs on a slip-on (they pass through the spacer and the wheel), and check that closed-end lug nuts do not bottom out. The wheel must seat flush on any pair: the listings for every bolt-on pair here except the 72.56mm-bore 5x120 pair say to shorten any factory stud that stands proud of the spacer face and stops the wheel seating flush. Before ordering the 8mm flat 4x100 pair, confirm that your vehicle's hub measures 56.1mm.
• Torque: torque to Honda's specification for your model and check the nuts again after the first 50 to 100 miles.

Common questions

Which spacers fit a Honda Civic? Civic 2006–2026 (not the Type R): the 64.1mm hub centric pair (for factory wheels with a 64.1mm center bore), the 15mm slip-on pair (installed with its included extended studs; its 64mm wheel-side lip needs a wheel center bore that accepts it) or the 5x4.5" 12x1.5 pair. US Civic 1980–2005 (not the 1985–1987 4WD wagon, which the 4x100 listings exclude): the 56.1mm 4x100 slip-ons (the 12mm, 15mm and 20mm have a centering lip your wheel's center bore must accept) or the 4x100 bolt-on pair, except the 2004–2005 Si hatchback, which takes the 5x114.3 spacers. Civic Type R 2017–2021 and 2023–2026: the 5x120 pairs with 14x1.5 studs. On a slip-on, check that the studs keep full thread engagement at the thickness you choose and fit longer studs if they fall short; from 12mm up, plan on them. Never shorten the studs on a slip-on (they pass through the spacer and the wheel), and check that closed-end lug nuts do not bottom out. The wheel must seat flush on any pair: the listings for every bolt-on pair here except the 72.56mm-bore 5x120 pair say to shorten any factory stud that stands proud of the spacer face and stops the wheel seating flush. Before ordering the 8mm flat 4x100 pair for a US Civic 1980–2005, confirm that its hub measures 56.1mm.

Which spacers fit an Accord? Accord 2003–2026: the 64.1mm hub centric pair (for factory wheels with a 64.1mm center bore), the 15mm slip-on pair (installed with its included extended studs, keeping full thread engagement; its 64mm wheel-side lip needs a wheel center bore that accepts it) or the 5x4.5" 12x1.5 pair. Accord 1990–1997 and four-cylinder Accord 1998–2002: the 4x4.5" pair (the 1998–2002 V6 is five-lug, so count the lugs first). Accord 1982–1989: the 56.1mm 4x100 slip-ons (the 12mm, 15mm and 20mm have a centering lip your wheel's center bore must accept; keep full thread engagement at the thickness you choose and fit longer studs if they fall short) or the 4x100 bolt-on pair. Never shorten the studs on a slip-on (they pass through the spacer and the wheel), and check that closed-end lug nuts do not bottom out. On a bolt-on pair, shorten any factory stud that stands proud of its face and stops the wheel seating flush. Before ordering the 8mm flat 4x100 pair for an Accord 1982–1989, confirm that its hub measures 56.1mm.

Which spacers fit a CR-V or HR-V? US CR-V 1997–2026 and HR-V 2016–2026: the 64.1mm hub centric pair (for factory wheels with a 64.1mm center bore), the 15mm slip-on pair (installed with its included extended studs, keeping full thread engagement; its 64mm wheel-side lip needs a wheel center bore that accepts it) or the 5x4.5" 12x1.5 pair. If the factory studs stand proud of a bolt-on pair's face and stop the wheel seating flush, shorten them.

Do I need longer studs with the 15mm slip-on pair? Yes. The 15mm pair comes with extended wheel studs, and its listing says to use the included extended studs so the lug nuts keep full thread engagement through the added 15mm. Its 64mm wheel-side lip also needs a wheel center bore that accepts it.

Do bolt-on Honda spacers include lug nuts? Each listing says what it includes. The pair fastens to the hub with your own lug nuts on a studded hub, or with hub-side lug bolts in your car's thread and seat, bought separately, on a lug-bolt hub, since bolt-on spacers never include lug bolts. The wheel mounts on the pair's studs with the lug nuts named in that listing, or with lug nuts matching its stud thread if none are named.

More wheel spacers

Browse all wheel spacers, hub centric slip-on wheel spacers, hub centric bolt-on wheel spacers and bolt-on wheel spacers, or shop by lug count: 4 lug and 5 lug wheel spacers. The same 64.1mm and 56.1mm spacers are on our Acura wheel spacers page, and the 73mm-bore 5x4.5" 12x1.5 pair, the 64mm-bore 4x100 pair and the 4x4.5" pair on our Toyota wheel spacers page.