Wheel Adapter 6 Lug 5.5" To 6 Lug 5.5" (Pair) 108mm Nissan

This type of adapter is used for 6 lug 5.50" (139.7mm) bolt pattern cars/trucks with big center hub to fit 6 lug 5.50" (139.7mm) bolt pattern wheels. The studs thread size match all Nissan studs. CNC machined billet aluminum. New wheel studs and lug nuts are included.

These adapters can be used on the following cars, among others:

• Nissan: Xterra (99-04), Frontier Pickup 4WD (98-04), Frontier (87-04), Hard Body Pickup 2/4WD (85-on), Pickup 2/4WD (72-84)
• Infiniti: QX-4 (97-on)

Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.

Fitment and specs

• Adapts a 6x5.5" (6x139.7mm) hub to 6x5.5" (6x139.7mm) wheels
• Same pattern both sides, so it functions as a spacer to widen track
• 108mm center bore
• Sized for the Nissan applications shown in the description above
• Sold in pairs

Set each adapter squarely on a clean hub face and torque to your vehicle's factory specification, then re-torque after 50 to 100 miles using our torque reference chart. Any factory studs that reach past the adapter must be trimmed so the wheel seats flat.

Common questions

Are wheel adapters safe?
They are, provided they seat flat, are torqued to spec with full stud engagement, and get re-torqued after a short break-in drive.

Will my wheels sit further out?
Yes. Because the pattern stays 6x5.5", the pair mainly adds track width for a wider, more planted stance.