Hub Centric Ring O.D. 73mm I.D. 70.1mm Legend

One set of 4 hub centric rings with O.D. (outer diameter) of 73mm and I.D. (inner diameter) of 70.10mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Acura: Legend 91-95

• Honda: S-2000 (Front)

Size:

Fitment and specs

• Outer diameter (O.D.): 73mm, matches the wheel center bore
• Inner diameter (I.D.): 70.1mm, matches the vehicle hub
• Set of 4 rings, one for each wheel
• Made of high quality poly carbon
• Listed applications: Acura Legend 1991-1995 and Honda S-2000 (front)

Press each ring into the center bore on the back side of the wheel until it seats flush, then mount the wheel as usual. The ring fills the space between the 73mm wheel bore and the 70.1mm hub, so the wheel centers precisely on the hub for a smooth ride. They press in by hand, no tools needed.

Common questions

How do I confirm this is the right size?
Match two numbers. The center bore of your aftermarket wheel should measure 73mm, and your vehicle hub should measure 70.1mm; your wheel dealer can confirm the bore if you are not sure. When both match the ring's O.D. and I.D., it is the correct ring.

Do the rings stay in the wheel when I take it off?
Yes. They press into the wheel's center bore, so they come off with the wheel and stay seated for the next install. One set of 4 covers all four wheels.