Hub Centric Ring O.D. 93mm I.D. 66.1mm Nissan Infinity

One set of 4 hub centric rings with O.D. (outer diameter) of 93mm and I.D. (inner diameter) of 66.1mm. They are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Nissan : Altima, Maxima, Sentra (83-86), Stanza, 240SX & Turbo (84-88), SE, 240Z, 260Z, 280Z, 300ZX, Quest, Axxess

• Infinity: G20, I30, J30, M30, Q45

Size:

Fitment and specs

• Outer diameter (O.D.): 93mm, matches the wheel center bore
• Inner diameter (I.D.): 66.1mm, matches the hub
• One set of 4 rings, made of high quality poly carbon
• Nissan fitment: Altima, Maxima, Sentra (83-86), Stanza, 240SX and Turbo (84-88), 240Z, 260Z, 280Z, 300ZX, Quest, Axxess
• Infinity fitment: G20, I30, J30, M30, Q45

Fit one ring into the center bore on the back of each wheel; light hand pressure seats it flush. From there the wheel drops over the hub centered, so mounting is quicker and the wheel runs true once tightened. No tools or adhesives are needed.

Common questions

How do I confirm fitment for my Nissan or Infinity?
Match two measurements: your aftermarket wheel's center bore should be 93mm and your hub should measure 66.1mm. If your model is on the list above and those numbers line up, these are the right rings.

Can I reuse the rings if I change wheels later?
Yes, as long as the new wheels also have a 93mm center bore. The rings are sized to the wheel bore and the 66.1mm hub, so they carry over to any wheel with the same bore.