Black Tuner Lug Bolt 12x1.50 Thread 35MM Shank
Fitment and specs
- Thread size: 12x1.5
- Seat type: tuner seat, driven by the included key
- Overall length: 2.44 in (62mm); shank: 1.38 in (35mm)
- Bolt outer diameter: 3/4 in
- Black finish, offered in 16, 20, or 24 piece sets
Hold the wheel flush on the hub and start every bolt by hand so the 12x1.5 threads cannot cross. Seat the tuner key fully in the bolt head, snug the bolts in a star pattern, then tighten to your vehicle's spec with our torque reference chart. Re-torque after 50 to 100 miles of driving.
Common questions
Can I use these in wheels made for cone or ball seat bolts?
No. The seat is the surface that clamps the wheel, and tuner, conical, and ball seats are not interchangeable. These belong only in wheels machined for tuner seat hardware.
How do I know a 35mm shank is right?
Match the bolts coming off the car. The shank is the smooth section under the head, and it should equal your originals so thread engagement in the hub stays the same. These measure 1.38 in (35mm) of shank and 2.44 in (62mm) overall.