Spline Drive Tuner Lug Nuts 12x1.50 Red

6-Spline tuner style red finish lug nuts 12mmx1.5 thread size with key. The hex key has both 3/4" and 13/16" head. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us. Sold in optional 16 piece with key, 20 piece with key and 24 piece set with key. Add extra keys from accessories on the right, if needed.

Size

Fitment and specs

• Thread size: 12mm x 1.5
• 6-spline tuner drive with matching spline key included
• Key hex head fits both 3/4 inch and 13/16 inch sockets
• Red finish, heat treated for added strength
• Sold in 16, 20, or 24 piece sets, each with a key

Start every nut by hand for a few turns to rule out cross-threading, then snug them in a star pattern with the included key. Finish with a torque wrench, using our torque reference chart as a guide for your thread size, and re-torque after 50 to 100 miles.

Common questions

Do I need a special socket to install these?
No. The set includes a spline drive key that engages the 6-spline pattern, and the key's hex head works with a standard 3/4 inch or 13/16 inch socket. Keep the key with your spare tire tools so you can pull a wheel on the road.

How do I know these will fit my wheels?
Check two things. Your studs must be 12x1.5 thread, and your wheel's lug holes must be machined for the same seat style as the nut. Conical, mag, and ball seats are not interchangeable, so confirm what your wheels require before torquing down.