Spline Drive Tuner Lug Nuts 14x2

Fitment and specs

• Thread size: 14mm x 2.0
• 6-spline tuner drive, spline key included
• Key hex head fits 3/4 inch and 13/16 inch sockets
• Chrome plated finish
• Heat treated for added strength
• Extra keys available separately

Thread each nut on by hand first; a 14x2.0 nut should spin onto a matching stud smoothly and should never be forced. Tighten in a star pattern with the key, torque to the spec in our torque reference chart, and re-torque after 50 to 100 miles.

Common questions

How do I confirm 14x2.0 is my thread size?
Check your vehicle's stud specification, or test-fit one nut: the correct pitch starts easily by hand and runs down without binding. If it fights you after a turn or two, stop, since forcing the wrong pitch damages studs.

Will these seat correctly on my wheels?
Only if the wheel is machined for the same seat style as the nut. Conical, mag, and ball seats are not interchangeable, so identify your wheel's seat type first, then match the 14x2.0 thread to your studs.