Spline Drive Tuner Lug Nuts 14x2.0 Black

7-Spline tuner style black finish lug nuts 14x2.0 thread size with key. The hex key has both 3/4" and 13/16" head. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us. Add extra keys from accessories on the right, if needed.

Fitment and specs

• Thread size: 14mm x 2.0
• 7-spline tuner drive pattern with matching key included
• Key hex head fits 3/4 inch and 13/16 inch sockets
• Black finish, heat treated for added strength
• Extra keys available separately

Hand-thread each nut before reaching for tools, then tighten in a star pattern using the included key and a torque wrench. Set torque using our torque reference chart and re-torque after 50 to 100 miles.

Common questions

Will a generic spline key work on these?
Use the key that ships with the set. These nuts run a 7-spline pattern, so a key with a different spline count will not engage properly. Extra matching keys are available separately if you want a spare.

What else should I verify before ordering?
Two things: your studs must be 14x2.0 thread, and your wheel's lug seats must match the nut's seat style. Conical, mag, and ball seats are not interchangeable, so check both before you order.