Wheel Adapter for Ford Bronco II

Wheel Adapters for the Ford Bronco II (5x4.5" / 5x114.3mm)

These wheel adapters bolt directly to your Ford Bronco II's native 5x4.5" (5x114.3mm) hub and give you a new mounting surface, so you can run a different wheel bolt pattern, push the wheels out for wider track width, and clear larger tires. Whether you want offset-heavy wheels to fill the fenders or a completely different pattern, a set of adapters gets you there without re-drilling hubs or swapping axles. Confirm your exact year and trim before ordering.

Ford Bronco II bolt pattern by year

• 1984–1988 (Gen 1): 5x4.5" (5x114.3mm), fits these adapters
• 1989–1990 (Gen 2): 5x4.5" (5x114.3mm), fits these adapters

The Bronco II carried the same 5x4.5" (5x114.3mm) pattern through its entire run, shared with the Ford Ranger of the era, the real fitment check is always the pattern itself, so count your lugs and measure the hub before you buy. Do not confuse the compact Bronco II with the full-size Ford Bronco, which uses a larger 5x5.5" (5x139.7mm) pattern that these Bronco II adapters do NOT fit.

Convert your Ford Bronco II to run these wheels

• 5x4.5" (5x114.3mm) hub to 4x156mm wheels
• 5x4.5" (5x114.3mm) hub to 5x4.5" (5x114.3mm) wheels (spacer, same pattern, added track width)
• 5x4.5" (5x114.3mm) hub to 5x4.75" (5x120.6mm) wheels
• 5x4.5" (5x114.3mm) hub to 5x5.5" (5x139.7mm) wheels
• 5x4.5" (5x114.3mm) hub to 6x5.5" (6x139.7mm) wheels
• 5x4.5" (5x114.3mm) hub to 4x100mm wheels
• 5x4.5" (5x114.3mm) hub to 4x4.5" (4x114.3mm) wheels
• 5x4.5" (5x114.3mm) hub to 5x130mm wheels

All adapters ship as a pair; order two pairs for a full four-corner setup.

Common questions

What bolt pattern does the Ford Bronco II use?
Every Ford Bronco II from 1984 through 1990 uses the 5x4.5" (5x114.3mm) bolt pattern, five lugs on a 114.3mm circle, the same pattern as the contemporary Ford Ranger. Our adapters bolt to that hub pattern.

Did the Bronco II bolt pattern change across model years?
No. Unlike some trucks that switched patterns between generations, the Bronco II kept 5x4.5" (5x114.3mm) for its entire 1984–1990 production. The trap is mixing it up with the full-size Bronco, which is 5x5.5" (5x139.7mm), a different vehicle and a different pattern. When in doubt, measure your hub and count the lugs.

Free US shipping on all wheel adapters, shipped from our Los Angeles warehouse. Questions on fitment? Call (800) 505-8758.