Wheel Adapter 8 Lug 170 To 8 Lug 180 (Pair) 14x1.5 Stud
This type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 180mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.
These adapters can be used on the following trucks, among others:
- Ford: F250/F350 (03-on), Excursion (03-on)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" and 1.5" thick adapters.
Fitment and specs
- Hub side bolt pattern: 8x170mm
- Wheel side bolt pattern: 8x180mm
- Stud thread: 14x1.5
- Bolts to your 8x170mm hub so you can run 8x180mm wheels
- Sold as a pair, with free US shipping
Seat each adapter flat on a clean hub with full stud and thread engagement, then torque the hardware to your vehicle's factory specification using the torque reference chart. If factory studs reach past the adapter face, shorten them so the wheel can seat flush. Re-torque after 50 to 100 miles.
Common questions
Are wheel adapters safe?
Yes, as long as the adapter sits flat against the hub with full stud and thread engagement and is torqued to spec, then re-torqued after the first short drive. Correct seating and torque are what count.
Does this let me change my bolt pattern?
Yes. Your hub stays 8x170mm while the outer face is 8x180mm, so you can bolt on 8x180mm wheels that would not otherwise fit your existing hub.