Wheel Adapter 8 Lug 170 To 8 Lug 170 (Pair) 14x1.5 Stud
This type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 170mm bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.
These adapters can be used on the following cars, among others:
- Ford: F250/F350 (03-on), Excursion (03-on)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" and 1.5" thick adapters.
Fitment and specs
- Bolt pattern: 8x170mm hub to 8x170mm wheel
- Stud thread: 14x1.5
- Same pattern in and out, so they add track width
- Sold in pairs, free US shipping
With 8x170mm on both sides, these work as spacers that move the wheels outward for a wider stance rather than changing your pattern, and they carry 14x1.5 studs for the new wheels. Torque everything to your vehicle's factory specification using our torque reference chart, then re-torque after 50 to 100 miles. If your factory studs extend past the spacer face, shorten them so the wheel sits flush.
Common questions
Are these spacers safe to run?
Yes, when they sit flat on a clean hub, are torqued to spec, re-torqued after a short drive, and have full stud and thread engagement.
What lug nuts do I need?
The adapter uses 14x1.5 studs, so match your outer wheel nuts to a 14x1.5 thread. Confirm your hub is 8x170mm as shown in the description above.