Wheel Adapters for Toyota 4Runner

Toyota 4Runner bolt pattern by year

• 1984–1988 (1st Gen): 6x5.5" (6x139.7mm), fits these adapters. Every 4Runner generation uses 6x139.7mm
• 1989–1995 (2nd Gen): 6x5.5" (6x139.7mm), fits these adapters
• 1996–2002 (3rd Gen): 6x5.5" (6x139.7mm), fits these adapters
• 2003–2009 (4th Gen): 6x5.5" (6x139.7mm), fits these adapters
• 2010–2024 (5th Gen): 6x5.5" (6x139.7mm), fits these adapters
• 2025+ (6th Gen): 6x5.5" (6x139.7mm), fits these adapters (note: 6th-gen trucks switched to M14x1.5 lug studs and a smaller 95.1mm hub bore, so confirm lug and bore specs on your setup)

From the second generation (1989) onward, every 4Runner has run the same 6x5.5" (6x139.7mm) pattern, that part is well documented. Every generation, including pre-1989 trucks, uses 6x139.7mm; the real fitment check is simply confirming that pattern on your hub. Count your lugs and measure the pattern before you buy.

Convert your Toyota 4Runner to run these wheels

• 6x5.5" (6x139.7mm) hub to 8x6.5" (8x165mm) wheels
• 6x5.5" (6x139.7mm) hub to 6x5.5" (6x139.7mm) wheels (spacer / added track width, same pattern)
• 6x5.5" (6x139.7mm) hub to 6x135mm wheels
• 6x5.5" (6x139.7mm) hub to 6x4.5" (6x114.3mm) wheels
• 6x5.5" (6x139.7mm) hub to 8x170mm wheels
• 6x5.5" (6x139.7mm) hub to 5x5.5" (5x139.7mm) wheels
• 6x5.5" (6x139.7mm) hub to 6x120mm wheels
• 6x5.5" (6x139.7mm) hub to 5x4.75" (5x120.6mm) wheels

All adapters ship as a pair; order two pairs for a full four-corner setup.

Common questions

What bolt pattern does the Toyota 4Runner use?
From the 1989 second generation through the current 2025+ sixth generation, the 4Runner uses a 6-lug 6x5.5" (6x139.7mm) bolt pattern, and our adapters bolt to that hub. All 4Runner years share the 6x139.7mm pattern, so any of these adapters fits once you confirm your hub measures 6x5.5"; 6x114.3 is a Nissan Frontier and Xterra pattern, not a Toyota one.

Did the 4Runner's bolt pattern change over the years?
The hub pattern has stayed at 6x5.5" (6x139.7mm) consistently from 1989 onward, so 2nd- through 6th-generation trucks share the same mounting pattern. The only real change to watch is on the newest 2025+ sixth gen, which moved to M14x1.5 lug studs and a smaller 95.1mm hub bore, the pattern is the same, but confirm your lug size and center bore.