Spline Drive Tuner Lug Nuts 12x1.50 Gold
6-Spline tuner style gold finish lug nuts 12mmx1.5 thread size with key. The hex key has both 3/4" and 13/16" head. The lugs are heat treated to achieve extra strength. Gold color gives the wheel a royal, majestic look. They shine and stand out.
Fitment and specs
- Thread size: 12x1.5 (12 mm diameter, 1.5 mm pitch)
- 6-spline tuner drive, key included
- Key is driven by a 3/4 inch or 13/16 inch socket or wrench
- Heat treated for extra strength
- Gold finish
Thread every nut on by hand first, then tighten in a star pattern with the included spline key. Bring each one to your vehicle's torque spec with a torque wrench, using our torque reference chart, and re-torque after 50 to 100 miles of driving.
Common questions
Can I install these with an impact gun?
Snug them with the spline key and save the final pass for a torque wrench. An impact can blow past the correct torque, which stresses the studs and can mar the gold finish. Hand-torquing takes a few extra minutes and keeps everything accurate.
Do these fit any wheel with 12x1.5 studs?
The thread will match any 12 mm stud with a 1.5 mm pitch, but the wheel side matters too. Your wheel's lug seats must match the nut's seat style, since conical, mag and ball seats are not interchangeable, and the lug holes need enough clearance for the spline key to drop over the nut.