Spline Drive Tuner Lug Nuts 7/16" Red
6-Spline tuner style red finish lug nuts 7/16"-20 thread size with key. The hex key has both 3/4" and 13/16" head. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us. Add extra keys from accessories on the right, if needed.
Fitment and specs
- Thread size: 7/16"
- Red finish, 6-spline tuner style drive
- Heat treated for extra strength
- Spline key included, with dual 3/4" and 13/16" hex head
Thread the nuts on by hand before reaching for tools, then seat the spline key fully and snug them down evenly. Finish with a torque wrench set to the spec on our torque reference chart, and re-torque after 50 to 100 miles of driving.
Common questions
Do I need to match the seat type to my wheels?
Yes. Conical, mag, and ball seats are not interchangeable, so the nut seat has to match what your wheel is machined for. Our application guide page answers most fitment questions, and you can ask us if you are unsure.
Should I use an impact gun on these?
Use hand tools for final tightening. An impact gun makes it easy to overshoot torque and is hard on the key, so run the nuts down with the key and finish with a torque wrench.