Wheel Adapter 4 Lug 156 To 5 Lug 4.5" (Pair)
This type of adapter is used for ATV 4 lug 156 bolt pattern cars to fit 5 lug 4.5' (114.3mm) bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included. Please note this is a one piece adapter.
Adapter Center Bore = 136mm (8mm deep then steps down to 82mm)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Bolts to a 4x156mm ATV hub so you can run 5x4.5" (5x114.3mm) wheels
- One-piece adapter design
- Center bore: 136mm opening, 8mm deep, then steps down to 82mm
- CNC machined billet aluminum with new wheel studs included
- Sold as a pair (2 adapters)
- Free US shipping
Seat each adapter flat on a clean hub and torque the adapter nuts to spec before mounting the wheel, using the torque reference chart. If the factory studs protrude past the adapter face, shorten them so the wheel sits flush. Re-torque all hardware after 50 to 100 miles.
Common questions
Are wheel adapters safe?
Yes, when installed correctly. The plate must sit flat against the hub, all hardware torqued to spec and re-torqued after the first 50 to 100 miles, with full thread engagement on every stud.
Will the adapter clear my hub center?
The bore is 136mm wide for the first 8mm of depth, then steps down to 82mm. Measure the diameter and height of the raised center on your hub and compare against those numbers before ordering.