Wheel Adapter 4x100 To 4x98 (Pair)
| Converts from (hub) | 4x100mm |
|---|---|
| Converts to (wheel) | 4x98mm |
| Center bore | 64mm |
| Stud thread | 12x1.5 |
| Thickness | 1" |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
This type of adapter is used for 4 lug 100mm bolt pattern cars to fit 4 lug 98mm bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included. These adapters bolt to the following vehicles (US models):
Vehicle fitment
- Acura: Integra (86-01, not the 97-01 Integra Type R, which is 5x114.3)
- BMW: 3 Series (77-91, not the E30 M3)
- Chevrolet: Aveo (04-11), Nova (86-88), Prizm (98-02)
- Dodge: Aries (81-85), Caravan (84-85), Charger (83-85), Colt (89-94, not the Colt Vista, wagon or AWD models)
- Ford: Aspire (94-97), Escort ZX2 (98-03)
- Honda: Accord (82-89), Civic (80-05, not the 04-05 Civic Si hatchback, which is 5x114.3), Civic Hybrid (03-05), Civic Si hatchback (02-03), CRX (84-91), Del Sol (93-97), Fit (07-20, gasoline models), Insight (00-06, 10-14), Prelude (79-91)
- Hyundai: Accent (00-22)
- Mazda: MX-5 Miata (90-05, 16-26)
- MINI: Cooper (02-06)
- Mitsubishi: Mirage (93-01, 14-22)
- Nissan: 200SX (95-98), Sentra (87-99)
- Saturn: Ion (03-07, not the Ion Red Line, which is 5x110), S-Series (91-02)
- Toyota: Celica (86-93, base models), Corolla (88-02), Echo (00-05), MR2 (85-89), MR2 Spyder (00-05), Paseo (92-97), Tercel (83-98), Yaris (07-20)
- Volkswagen: Cabrio (95-02), Corrado (90-92, not the Corrado SLC VR6, which is 5x100), Jetta (80-98, 4-cylinder models), Passat (90-96, 4-lug models; not the VR6, which is 5x100), Scirocco (75-88)
Hub-side lug nuts or lug bolts are bought separately, in your vehicle's thread. Where the hub uses lug bolts, confirm full thread engagement, fully recessed heads and flush seating.
Used to convert to 4x98 bolt pattern wheels, such as factory wheels from the Fiat 124 Spider (70-85).
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Hub side: 4x100mm
- Wheel side: 4x98mm
- Converts a 4x100mm hub to run 4x98mm wheels
- Sold in a pair
- Free US shipping
Seat each adapter flat against a clean hub and confirm full stud and thread engagement before mounting the wheel. If factory studs extend past the adapter face, shorten them so the wheel sits flush. Torque to your vehicle's factory specification with the torque reference chart, then re-torque after 50 to 100 miles.
Common questions
Are wheel adapters safe?
Yes, when each adapter seats flat on a clean hub, threads are fully engaged, and the hardware is torqued to spec and re-checked after a short first drive. Verify fitment against the vehicles listed in the description above.
Why would I need a 4x100 to 4x98 adapter?
It bridges two close but incompatible patterns, letting a 4x100mm hub accept 4x98mm wheels that otherwise would not line up.
Shop related: 4x100 hub wheel adapters