5 x 100-120mm Spacer 3/16" Thick (Pair)
| Thickness | 3/16" |
|---|---|
| Sold as | Pair (2 pieces) |
Fitment and specs
- Fits 5 lug bolt patterns from 5x100 up to 5x120mm, the range that includes the standard 4.75 inch pattern
- 3/16 inch thick, moving each wheel out by the same amount
- Lightweight aluminum construction
- Sold in pairs
Slip the spacer over your studs so it sits fully flat against the hub face, then mount the wheel as usual. Because the spacer moves the wheel out 3/16 inch, check that you still have the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs (or longer lug bolts on cars that use them) if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Torque to your vehicle's spec using our torque reference chart and re-torque after the first 50 to 100 miles.
Common questions
Do I need longer wheel studs with this spacer?
Not always. The 3/16 inch thickness reduces available thread by the same amount, so check that the studs still give the thread engagement required by the vehicle, wheel and fastener manufacturers with the wheel mounted. If they do not, suitable longer studs are the fix.
What is a thin spacer like this used for?
A 3/16 inch spacer buys a small amount of clearance per side, often enough to keep a wheel from lightly rubbing a brake caliper or suspension component without changing the look of the car.