Wheel Adapter 5 Lug 5.5" To 8 Lug 6.5 Thickness 2" (Pair)
| Converts from (hub) | 5x5.5" (5x139.7mm) |
|---|---|
| Converts to (wheel) | 8x6.5" (8x165.1mm) |
| Center bore | 108mm |
| Stud thread | 14x1.5 |
| Thickness | 2" |
| Material | 6061-T6 billet aluminum |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
Fit 8x6.5 Bolt Pattern Chevy Wheels On 5x5.5 Dodge
These are used for 5x5.5" (139.7mm) bolt pattern cars to fit 8 Lug 6.5" (165mm) bolt pattern wheels. CNC machined 6061 T6 billet aluminum and 2" in thickness. New wheel studs are included. This is a 2 piece combination adapter in order to solve hole overlapping issue.
Most Popular Applications:
Bolt on 5 Lug Vehicles Below:
Ford Bronco (1966-1996, not the Bronco II)
Ford F-100 with a 5x5.5-inch hub pattern (measure the hub to confirm bore clearance)
Ford F-150 54-96
Dodge Ram 1500 99-10, Ram 1500 11-18, Ram 1500 Classic 19-22
Dodge Dakota 05-10
Dodge Ramcharger 85-93 and part-time 4WD 79-84 (measure the 79-84 hub and confirm it passes through the adapter's 108mm center bore)
Dodge Durango 04-09
Kia Sorento 03-09
Kia Sportage 94-02
Suzuki Samurai
To Fit 8x6.5 Bolt Pattern Wheels or Wheels From Vehicles Below:
8 Lug Chevy Silverado 99-10
8 Lug Chevy Suburban 89-14
8 Lug Ford F-250 80-97
Ford F-350 82-98
8 Lug Dodge Ram (not the 2019-2022 dual-rear-wheel Ram 3500, which is 8x200)
8 Lug Chevy C2500 (88-00)
Chevy K20, 8 Lug Chevy C/K 2500 HD and C/K 3500 (88-00)
8 Lug Chevy Avalanche
NOTE: These will NOT work on the JEEP CJ or any Locking Hub
You can count on our premium quality 2 piece adapters for durability and strength. Price is for a pair (2 adapters).
You can view installation instruction document online How To Install 2 Piece Conversion Adapters
Check our Torque Reference Guide for information on how to properly install your wheel adapters.
Fitment and specs
- Inner side bolts to a 5x5.5" (139.7mm) hub
- Outer side runs 8x6.5" (165mm) wheels
- 2" thick, adding track width in the process
- Pair
Place each adapter flat on a clean hub, then torque the mounting hardware to your vehicle's factory specification and confirm the wheel fasteners as well. If your original studs protrude beyond the adapter face, shorten them so the wheel can seat flush. Check the torque reference chart for the correct figures and re-torque after the first 50 to 100 miles.
Common questions
Are wheel adapters safe?
They are made for road use when they are seated flat against a clean hub, torqued to your vehicle's spec with full thread engagement, and re-torqued after the first 50 to 100 miles. Use hub centric rings where the listing calls for them. Always match the applications shown in the description above to your vehicle first.
What does this let me run?
It converts a five-lug 5x5.5" (139.7mm) hub to an eight-lug 8x6.5" (165mm) pattern, so you can bolt on wheels built for that spacing. Free US shipping applies.
Shop related: 5x5.5" (5x139.7) hub wheel adapters · 5 lug to 8 lug wheel adapters