Hub Centric Wheel Adapter 5x130 To 5x112 (Pair)
Put 5x112 Mercedes Wheels On 5 Lug Porsche
These are used to mount on 5x130mm bolt pattern hub to fit 5x112mm bolt pattern Mercedes wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. Studs thread size 14x1.5mm.
Hub Centric Design For A Factory Fit
Vehicle side: Snug fit on vehicle hub with 71.5mm bore
Wheel side: Hub centric lip to fit 66.5mm wheel bore
Adapters To Be Bolted To the Following Vehicles:
Porsche
911, 928, 944, 968, etc.
Note: For earlier year models like 944, 928, 911, front hub sticks out farther than the rear. These hub centric adapters may not work.
Allow To Fit 5x112mm Bolt Pattern Wheels or Wheels From Vehicles Below:
Mercedes
Mercedes in 5x112 Bolt Pattern (most Mercedes)
Note: For some Mercedes wheels, the wheel mounting walls are extremely thick, you may want to check before buying these adapters because occasionally the adapters may not be long enough.
Our premium quality adapters guarantees durability and strength. Price is for a pair (2 adapters).
Application Examples & Special Notes:
Mount 5 lug Mercedes wheels on Porsche
Notes: If your Porsche is using lug bolts, you may want to add mounting lug bolts as option to your order. The header on your factory bolts will be too large for these adapters.
**If hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs.
Fitment and specs
- Hub bolt pattern: 5x130mm
- Wheel bolt pattern: 5x112mm
- Hub centric for smooth, centered rotation
- Sold as a pair
- Free US shipping
These bolt to your 5x130mm hub so you can run 5x112mm wheels. Set each adapter flat against a clean hub face, torque the hardware to your vehicle's factory specification with the torque reference chart, and re-torque after 50 to 100 miles. If your factory studs reach past the adapter face, shorten them so the wheel can seat flush.
Common questions
Are wheel adapters safe?
Yes, when seated flat on a clean hub, torqued to spec, re-torqued after the first miles, and running full stud and thread engagement. Check your fitment against the applications shown in the description above.
Do these add spacing or change my pattern?
They change the pattern from 5x130mm to 5x112mm so a different-pattern wheel will fit, and they also push the wheel outward slightly for extra clearance.