Hub Centric Wheel Adapter 5 Lug 4.5" For Mustang 70.5mm (Pair)
These hub centric adapters are used for 5 lug 4.5" (114.3mm) bolt pattern with 70.5mm hub to fit 5 lug 4.5" (114.3mm) Ford factory wheels (70.5mm bore) with certain conditions. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub. The raised lip centers the following factory wheel perfectly.
They are guaranteed to fit the following models with original wheels. If the model and year of your vehicle is not on the list, you need to check and make sure your factory hub looks similar to diagram below and the height is no more than 20mm (see the the way to measure in the diagram below).
- Ford: Mustang (79-14), GT5000 (07-on), Shelby (05-on), Edge (07-on), Mach I (03-04)
- Ford: Explorer (91-02), Ranger (93-02) (due to differences in axle cap length in the front, these are for rear use only; non hub centric ones are recommended for front axle)
- Mercury: Mountaineer (97-02)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
Size:
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- 5-lug 5x4.5" (5x114.3mm) hub side and 5x4.5" (5x114.3mm) wheel side
- Hub centric to the 70.5mm bore for accurate centering
- Matching pattern front and back, so this pair adds track width
- Fits the Mustang applications listed in the description above
- Sold as a pair
Place each adapter on a clean hub, confirm it seats flat, and torque to your vehicle's factory specification. Factory studs that reach past the adapter face should be shortened so the wheel seats flush. Use the torque reference chart and re-torque after 50 to 100 miles. Free US shipping.
Common questions
Are wheel adapters safe?
Yes, as long as each one is seated flat on a clean hub, torqued to spec with full stud and thread engagement, and re-torqued after the first short drive.
Do these change my bolt pattern?
No. Both faces stay 5x4.5" (5x114.3mm); the set simply widens your track for better wheel and tire clearance.