Wheel Adapter 5x5.5 To 5120 (Pair) Step Bore

Put 5x120 BMW Wheels On 5 Lug Dodge Ram 1500

These are used for 5x5.5" (139.7mm) bolt pattern hub to fit 5x120mm bolt pattern wheels. CNC machined 6061 T6 billet aluminum. New wheel studs are included. Center bore is 108mm; studs thread size 14x1.5mm.

Adapters To Be Bolted To the Following Vehicles:

Jeep
All CJ (not working for the front)
Comanche

Dodge
All Ram 1500
Ramcharger
Dakota (05-10)
Durango (04-09)

Ford
Bronco
Econoline (5 Lug)
F100
F150 (54-96)

Geo
Tracker (not working for the front)

Suzuki
Grand Vitara (99-05) (not for 4WD with locking hub)
Sidekick (not for 4WD with locking hub)
Vitara (not for 4WD with locking hub)
Sumurai (not for 4WD with locking hub)

Mitsubishi
Raider

Allow To Fit 5x120mm Bolt Pattern Wheels or Wheels From Vehicles Below:

BMW
BMW in 5x120 Bolt Pattern (Most BMW has 5x120 bolt pattern)

Acura
MDX (07-13)
RL (05-12)
RLX
TL (09-13)

Honda
Odyssey (10-16)
Pilot (09-17)
Ridgeline

Land Rover
Ridgeline
Discovery
LR3, LR4
Range Rover (03-15, excl. Evoque)

Cadillac
CTS (08-17)
XTS

Chevy
Camaro (08-18)
Impala (14-18)
Malibu (13-16)
Equinox (10-17)
SS

Lexus
LS
LS460
LS600HL

Pontiac
G8
GTO (04-06)

Our premium quality adapters guarantees durability and strength. Price is for a pair (2 adapters).

Application Examples & Special Notes:

Allow you to put 5 lug BMW wheels on Dodge RAM 1500
Allow you to put Honda Ridgeline wheels on 1990 F150
Allow you to put new Camaro wheels on Ford Bronco

Notes: 5x120mm bolt pattern is different than 5x120.7mm (5x4.75). They are not interchangeable. You should not use 5x4.75 adapters. In addition, many 5x120 factory wheels use special 14x1.5 thread size lug nuts, so you have to use these adapters that come with 14x1.5 studs.

Also, these adapters have a step bore with 108mm opening in the back so that they can fit many vehicles with big hub. However these are not going to fit if you have locking hub for some models. (Check the list above).

**If hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs.