5x5.5" Wheel Spacers | Bolt-On, 1/2" Studs (Pair)
| Converts from (hub) | 5x5.5" (5x139.7mm) |
|---|---|
| Converts to (wheel) | 5x5.5" (5x139.7mm) |
| Stud thread | 1/2" |
| Thickness options | 1", 1.25", 1.5", 2" |
| Sold as | Pair (2 pieces) |
This type of adapter is used for both 5 lug 5.5" (139.7mm) bolt pattern cars to fit 5 lug 5.5" (139.7mm) bolt pattern wheels. Center bore is 108mm. CNC machined billet aluminum and thickness options are 1", 1.5" and 2". New wheel studs and lug nuts are included.
Vehicle fitment
- Dodge: Ramcharger part-time 4WD (79-83; measure the hub and confirm it passes through the adapter's 108mm center bore), Ram 1/2 Ton 2&4 WD (94-01), 1/2 & 3/4 Ton Truck (79-93), Ram Van (85-96)
- Ford: Bronco (1966-1996, not the Bronco II), F-100 and F-150 (54-96, 5x5.5-inch hubs only; measure the hub to confirm bore clearance), 1/2 Ton E-100, 150 Van (70-96), 1/2 Ton E-150 Van (97-06)
- Geo: Tracker(89-on)
- Jeep: All Jeep with a 5x5.5" bolt pattern, CJ (46-85), CJ-7 and CJ-8 Scrambler (86)
- Kia: Sorento (03-10), Sportage (94-02)
- Suzuki: Samurai (86-93), Sidekick (86-97), X-90 (96-98), XL-7 (01-on), Vitara (98-on), Grand Vitara (99-on)
- If your listed vehicle's hub studs differ from the adapter's stud thread, or use left-hand threads, mount the adapter with lug nuts matching your hub-stud thread and handedness in the adapter's required seat, bought separately; the adapter's own studs and included lug nuts are 1/2". Confirm full engagement and flush seating.
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Bolt pattern: 5x5.5" (5x139.7mm) in and out
- Same pattern both sides, so these push the wheels outward and add track width
- 1/2" studs
- Sold as a pair
Because the hub and wheel pattern match at 5x5.5", these act as spacers that widen your stance without changing bolt pattern. Seat each one flat on a clean hub, torque to your vehicle's factory specification, and re-torque after the first 50 to 100 miles. See our torque reference chart for the proper sequence.
Common questions
Are wheel adapters safe?
Yes, when they seat flat against a clean hub, are torqued to spec with full stud and thread engagement, and re-torqued after the first 50 to 100 miles. If your factory studs extend past the adapter face, shorten them so the wheel seats flush.
What thread do the wheels use on these?
The studs are 1/2", so you will need lug nuts that match a 1/2" thread. Confirm your current nuts before installing. Free US shipping is included.
Shop related: 5x5.5" (5x139.7) hub wheel adapters · 5 lug same pattern wheel adapters