Wheel Adapter 6 Lug 5.5" To 6 Lug 135 (Pair)
This type of adapter is used for 6 lug 5.5" (139.7mm) bolt pattern many recent Chevy cars/trucks to fit 6 lug 135mm bolt pattern wheels. Check your hub diameter before purchase. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.
These adapters can be used on the following cars, among others:
- Chevrolet: C/K 1500 2/4WD (99-01), Silverado 2/4WD (99-on), Sierra 2/4WD (99-on), Avalanche (01-on), Tahoe, Yokon (95-on), Blazer-Full Size 4WD (92-94), Suburban (92-on)
- GMC: G.M. - K1500 4WD (88-ON), GMC - Denali (98-on)
- Dodge: D-50 2/4WD (79-91)
- Honda: Passport (95-on)
- Isuzu: Axiom (01-on), Vehi-Cross 16" (99-on), Trooper (92-on), Trooper II (88-91), Rodeo (91-on), Pickup (84-on), Amigo 2/4WD (89-on)
- Infiniti: QX-4 (97-on)
- Mazda: Pickup, B2000, B2200 (77-96)
- Mitsubishi: Mentero (83-on), Mighty Max Pickup (83-on)
- Nissan: Xterra-16" (99-on), Frontier Pickup 4WD (98-on), Hard Body Pickup 2/4WD (85-on), Pickup 2/4WD (72-84)
- Toyota: Tacoma 4WD (95-on), Sequoia 4WD (01-on), Tundra (99-on), 4-Runner (86-on), T100 (93-98), Landcruiser (62-92)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
Fitment and specs
- Hub side: bolts to a 6x5.5" (139.7mm) six-lug hub
- Wheel side: mounts 6x135mm six-lug wheels
- Retains six lugs while moving to a wider bolt circle
- Sold as a pair
- Free US shipping
Seat each adapter flat on a clean hub and torque the mounting hardware to your vehicle's factory specification, confirming the wheel face sits flush before you tighten it down. Shorten any factory studs that protrude past the adapter so the wheel can rest flat. Use the torque reference chart and re-torque after 50 to 100 miles of driving.
Common questions
Are wheel adapters safe?
Yes, as long as each adapter is flush on a clean hub, torqued to spec, re-torqued after the first short drive, and running full stud and thread engagement. Those steps keep everything held tightly in place.
Will my current wheels still bolt on?
Only wheels drilled for 6x135mm will fit the outer face. The adapter converts your 6x5.5" hub, so it does not accept your original 6x5.5" wheels.