Hub Centric Rings O.D. 72.62mm I.D. 64.15mm Acura, Honda

One set of 4 hub centric rings with O.D. (outer diameter) of 72.62mm and I.D. (inner diameter) of 64.15mm. They are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks

• Acura: All cars* (except Integra, Legend)

• Honda: Acoord (90-on), Prelude (92-on), CR-V, Odessey, S-2000 (Rear)

* Please note that All cars do not include Trucks and SUVs.

Size:

Fitment and specs

• Outer diameter (O.D.): 72.62mm, matching the wheel's center bore
• Inner diameter (I.D.): 64.15mm, matching the vehicle hub
• Made of high quality poly carbon
• Set of 4 rings, one per wheel
• Fits Acura cars (except Integra and Legend, and not trucks or SUVs) plus the Honda models listed above, including Accord, Prelude, CR-V and the rear of the S2000

Clean the hub flange and the back of the wheel bore, then press a ring into each wheel until it sits flush. Mount the wheel normally; the ring keeps it centered on the 64.15mm hub while you tighten the lug hardware. If a ring feels snug, seat it with even hand pressure rather than tapping it in with tools.

Common questions

My car is not on the list. Can I still use these?
The list covers common applications, but the two measurements are what matter. If your hub is 64.15mm and your aftermarket wheel's center bore is 72.62mm, this ring is the right size regardless of model.

Do I need to glue them in?
No. The rings press in by hand and are held in place once the wheel is mounted, so they stay put through normal driving and come out cleanly when you change wheels.