Hub Centric Ring O.D. 73mm I.D. 60.06mm Lexus Toyota Suzuki
One set of 4 hub centric rings with O.D. (outer diameter) of 73mm and I.D. (inner diameter) of 60.06mm. These rings are made of high quality poly carbon. To determine proper fitment you need to do a couple of things. First you need to determine the center bore size, i.e. O.D. of the aftermarket wheel. Contact your wheel dealer if needed. Then find out the vehicle hub size, i.e. I.D. When these match our hub ring description, then they are the right size. These hub rings will fit the following cars and trucks
-
Lexus: LS430, IS300, ES300, GS300, GS400, LS400, LS400, SC300, SC400, SC430 (18" only) RX300
-
Suzuki: Swift
-
Toyota: Avalon, Camary Solara, Camary 92-on, MR-2 90-95, MR-2 Turbo, Highlander (16"), Tocama 2WD, RAV-4, Previa
Size:
Fitment and specs
- 73mm outer diameter hub centric ring
- 60.06mm inner diameter to fit over the hub
- Covers the applications listed in the description above, including Lexus, Toyota, and Suzuki fitments
- Bridges the gap between a wider wheel bore and your smaller factory hub
Drop the ring onto the hub first, then mount and torque the wheel so it centers on the ring rather than the studs. A quick wipe of the hub face keeps grit from holding the ring off flush. Nothing bonds it in place; wheel pressure holds it once the lugs are snug.
Common questions
Why use a hub centric ring at all?
It closes the small gap between the wheel and hub so the wheel runs dead center, delivering a smooth, balanced ride with no steering-wheel shimmy.
How do I check the sizing?
Your wheel's center bore should measure 73mm and your hub should measure 60.06mm. When both match the ring's outer and inner diameters, it fits.