Wheel Adapter 8 Lug 6.5" To 8 Lug 6.5" (Pair) 1/2" Stud
This type of adapter is used for 8 lug 6.50" (165mm) bolt pattern Dodge, older Ford (prior to 1999) or some older Chevy trucks to fit 8 lug 6.50" (165mm) bolt pattern wheels. Adapter stud size 1/2"-20. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.
These adapters can be used on the following cars, among others:
- Dodge: 3/4 Ton, 1 Ton 2/4WD (46-93)
- Chevy: 3/4 & 1 Ton K20 K30C20 C30 (65-87) (some may use 9/16" studs)
- Ford: F250, F350 (55-79) (some may use 9/16" studs)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" and 1.5" thick adapters.
Fitment and specs
- Wheel adapter set, sold as a pair
- Hub side: 8x6.5 inch (8x165.1mm) bolt pattern
- Wheel side: 8x6.5 inch (8x165.1mm) bolt pattern
- Stud thread: 1/2 inch
- Keeps the same pattern while spacing wheels outward
Because the pattern is 8x6.5 inch on both sides, these work as spacers: they keep your existing bolt pattern and push the wheels out for added track width and clearance. Torque the studs and wheels to your vehicle's factory specification, check the value on the torque reference chart, and re-torque after 50 to 100 miles. If your factory studs reach past the adapter face, shorten them so the wheel seats flush.
Common questions
Are wheel adapters safe?
Yes, when they seat flat on a clean hub, are torqued to spec, re-torqued after the first miles, and run full stud and thread engagement. Free US shipping is included.
Do these change my bolt pattern?
No. They stay 8x6.5 inch (8x165.1mm) in and out, so their job is added track width rather than a pattern change. Match your hub to the applications shown in the description above.