Wheel Adapter 8 Lug 6.5" To 8 Lug 6.5" (Pair) 9/16" Stud
This type of adapter is used for 8 lug 6.50" (165mm) bolt pattern Dodge, older Ford (prior to 1999) or some older Chevy trucks to fit 8 lug 6.50" (165mm) bolt pattern wheels. Adapter stud size 9/16"-18. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.
These adapters can be used on the following cars, among others:
- Dodge: RAM 2500-3500 2/4WD (94-2011)
- Ford: F250/F350 2/4WD (80-98)
- Chevy: 3/4 & 1 Ton K20 K30 C20 C30 (65-87) (some may use 1/2" studs)
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" and 1.5" thick adapters
Fitment and specs
- Fits an 8x6.5" (165.1mm) hub and accepts 8x6.5" (165.1mm) wheels
- Same bolt pattern in and out, adding track width like a spacer
- 9/16" studs
- Comes as a pair
- Free US shipping
Mount each piece flush to a clean hub face with full thread engagement, then bring the hardware to your vehicle's factory specification; the torque reference chart is there if you want a reference. Factory studs that protrude past the adapter face need to be shortened so the wheel seats flat. Re-torque after 50 to 100 miles of driving.
Common questions
Are wheel adapters safe?
They are when seated flat against the hub, torqued to spec with full stud and thread engagement, and re-torqued after a short initial drive.
Does this change my wheel fitment pattern?
No. It stays 8x6.5" (165.1mm) on both sides, so your current wheels bolt on while the track gets wider.