Wheel Adapter 4 Lug 4.5 To 4 Lug 100 (Pair)
| Converts from (hub) | 4x4.5" (4x114.3mm) |
|---|---|
| Converts to (wheel) | 4x100mm |
| Center bore | 73mm |
| Stud thread | 12x1.5 |
| Thickness options | 1", 1.25" |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
This type of adapter is used for 4 lug 4.5" (114.3mm) bolt pattern cars to fit 4 lug 100mm bolt pattern wheels. CNC machined billet aluminum and thickness options are 1" and 1.25". New wheel studs are included. These adapters bolt to the following vehicles (US models):
Vehicle fitment
- Acura: 2.2CL (97), 2.3CL (98-99), 3.0CL (97-99), 2.5TL (95-98), Legend (86-90), Vigor (92-94)
- Ford: Mustang (65-66, 6-cylinder models only)
- Honda: Accord (90-97), Prelude (92-96)
- Hyundai: Accent (95-99), Elantra (92-06), Sonata (89-05)
- Infiniti: G20 (91-96, 99-02)
- Mazda: 626 (83-87), RX-7 GSL-SE (84-85)
- Nissan: 240SX (89-94; 95-98 base models only), 300ZX (84-85, non-turbo models only), Altima (93-01), Sentra (00-12, not the 07-12 Sentra SE-R, which is 5x114.3), Stanza (90-92)
Hub-side lug nuts or lug bolts are bought separately, in your vehicle's thread. Where the hub uses lug bolts, confirm full thread engagement, fully recessed heads and flush seating.
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Bolts to a 4x4.5" (4x114.3mm) hub
- Lets you run 4x100mm wheels
- Converts the wheel pattern from 4x114.3 to 4x100
- Sold as a pair
- Free US shipping
These bolt to your 4x4.5" hub and give you a 4x100mm face, so wheels drilled for the popular 4x100 pattern fit without changing the vehicle. Place each adapter flat on a clean hub and torque the hardware to your vehicle's factory specification, using our torque reference chart, then re-torque after the first 50 to 100 miles. If factory studs protrude past the adapter face, shorten them so the wheel can seat flush.
Common questions
Are wheel adapters safe?
Yes. Seated flat on a clean hub, torqued to spec with full thread engagement, and re-torqued after the first 50 to 100 miles, they carry the load dependably.
Does this let me use a different wheel pattern?
Yes. Your hub keeps its 4x4.5" studs while the outer face is 4x100mm, so 4x100 wheels bolt right on.
Shop related: 4x4.5" (4x114.3) hub wheel adapters