Hub Centric Wheel Adapter 5 Lug 112 To 5 Lug 100 (Pair)
These hub centric adapters are used for 5 lug 112mm bolt pattern hub with 66.5mm to fit 5 lug 100mm wheels with 57.1mm bore. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub as well as the wheel side.
They fit the following models with factory hub height no more than 20mm (see the the way to measure in the diagram below).
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
Size:
Most Popular Applications:
Bolt on 5 Lug Vehicles Below:
5 Lug Mercedes5 Lug 112 bolt pattern Audi/VW
To Fit 5x100 Bolt Pattern Wheels or Wheels From Vehicles Below:
5 Lug 100 bolt pattern VW, etc.
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Bolts to your 5x112mm hub so you can run 5x100mm wheels
- Hub centric for precise centering and smooth balance
- Changes the effective bolt pattern from 5x112mm to 5x100mm
- Also adds a small amount of track width
- Sold as a pair
Set each adapter onto a clean, flat hub and torque the hardware to your vehicle's factory specification. Any factory studs that stick out past the adapter face need to be shortened so the wheel can seat flush. Check the torque reference chart and re-torque after 50 to 100 miles. Free US shipping.
Common questions
Are wheel adapters safe?
They are, provided each one seats flat on a clean hub, is torqued to spec with full stud and thread engagement, and gets re-torqued after a short initial drive.
Which side goes on the car?
The 5x112mm face bolts to your existing hub, and your 5x100mm wheels bolt to the outer face.