Hub Centric Wheel Adapter 5x100 Or 5x112 To 5x130 (Pair)
These hub centric adapters are used for 5 lug 100mm or 112mm bolt pattern hub with 66.6mm bore to fit vehicle hub (like early VW, Audi) and 71.5mm center bore to fit 5 lug 130mm Porsche wheels . CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included. They have a snug fit on vehicle hub as well as the wheel side.
They fit the following models with factory hub height no more than 20mm (see the the way to measure in the diagram below).
Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).
Size: 
**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.
Fitment and specs
- Mounts to a 5x100mm or 5x112mm hub and lets you run 5x130mm wheels
- Hub centric design for centered, balanced rotation
- Changes the effective bolt pattern to 5x130mm
- Widens track width in the process
- Sold as a pair
Fit each adapter to a clean hub, verify it seats flat, then torque to your vehicle's factory specification. Shorten any factory studs that extend past the adapter face so the wheel can seat flush. Check the torque reference chart and re-torque after 50 to 100 miles. Free US shipping.
Common questions
Are wheel adapters safe?
They are when each adapter sits flat on a clean hub, is torqued to spec with full stud and thread engagement, and is re-torqued after the first drive.
Will my old wheels still fit?
Only if they are 5x130mm. The outer face uses a 5x130mm pattern, while the hub side attaches to your 5x100mm or 5x112mm hub.