Black ET Spline Drive Tuner Lug Nuts 14x1.50
6-Spline tuner style black plated ET conical lug nuts 14mmx1.5 thread size with key. The hex key has both 3/4" and 13/16" head. 0.61" diameter. The lugs are heat treated to achieve extra strength. Our application guide page will answer most of your application fitment questions but do not hesitate to ask us.
Fitment and specs
- Thread size: 14x1.5 for 14 mm studs on a 1.5 mm thread pitch
- Black plated 6-spline ET tuner drive with conical seat
- Heat treated for extra strength
- Slim 0.61 inch diameter for narrow tuner wheel lug openings
- Includes spline key; hex head fits 3/4 inch and 13/16 inch sockets
Thread each nut on by hand a few turns, then drive it home with the included spline key on a standard socket, tightening in a star pattern. Set final torque with our torque reference chart and re-torque after 50 to 100 miles.
Common questions
Can I run these on wheels made for mag seat lug nuts?
No. Conical, mag, and ball seats are not interchangeable. These seat on a taper, so your wheels need conical lug seats for the nuts to center and stay torqued.
What is the difference between 14x1.5 and 14x2.0?
Both fit 14 mm studs, but the pitch differs. These use a 1.5 mm pitch, and the wrong pitch will not thread on past a turn or two by hand. Check your manual or an existing lug nut before ordering.