Open End Mag Style Lug Nut 12x1.50
12x1.50 open end mag style lug nuts including washers that fit Cragar SS wheels, etc. These lug nuts fit other custom replacement cast or forged aluminum wheels that are between 11/16" and 7/8" thick at the stud hole. The shank length is 0.75" and the total length is 1.57". Please refer to the following drawing for exact specification and size. Visit our application guide page for any application related information. Contact us for any questions. Sold in each piece.
Size:
Fitment and specs
- Thread size: 12x1.50
- Open end, standard mag style with washer included
- Shank length: 0.75"; total length: 1.57"
- Fits Cragar SS wheels and other cast or forged aluminum wheels 11/16" to 7/8" thick at the stud hole
- Sold individually
Set the washer flat against the wheel, start each lug nut by hand to avoid cross-threading, then tighten in a star pattern to the spec in our torque reference chart. Re-torque after 50 to 100 miles, since mag style hardware can settle slightly as the washers seat in.
Common questions
Can I use these in place of conical seat lug nuts?
No. Mag style lug nuts clamp through a flat washer and shank, while conical seat nuts center in a tapered hole. The two designs are not interchangeable, so always match the lug nut to the seat your wheel was machined for.
Do the washers come with the lug nuts?
Yes. Each lug nut includes its washer, and they are sold individually, so you can order exactly the count your wheels need.