5 x 100-120mm Spacer 5/16" Thick (Pair)
Light aluminum build. They are 5/16" thick. Fit 5 lug with standard 100 - 4.75" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs on your are long enough. It is recommended that your lug nuts should make at about seven turns when wheels are secured, and that a periodic check be made that they are torqued accordingly. Our application guide page will answer most of your application fitment questions but ask us for unanswered question. Sold in pair. (Please note these spacer do not work on 14x1.5 thread size studs if the bolt pattern is 5x100).
Fitment and specs
- Fits 5 lug bolt patterns from 100mm through 120mm (4.75 inch)
- Thickness: 5/16 inch
- Lightweight aluminum build
- Not compatible with 14x1.5 thread studs on the 5x100 pattern
- Sold in pairs
The spacer slips over your existing studs and sits between the hub and the wheel, so both mating faces need to be clean and flat. Torque the lug nuts to your vehicle's spec from our torque reference chart and confirm each nut makes about seven full turns. Re-torque after 50 to 100 miles of driving.
Common questions
Will these fit a 5x100 car with 14x1.5 studs?
No. That specific combination does not work with these spacers, so check your stud thread size before ordering if your vehicle runs the 5x100 pattern.
How do I know my studs are long enough?
A 5/16 inch spacer moves the wheel out by that amount, which costs you the same amount of thread. Thread each lug nut on by hand and count. About seven full turns means you have enough engagement; fewer means install longer studs first.