5 x 4 1/2"-5" Wheel Spacer 1/4" Thick (Pair)
Light aluminum build. They are 1/4" thick. Fit 5 lug with standard 4 1/2" - 5" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs on your are long enough. It is recommended that your lug nuts should make at about seven turns when wheels are secured, and that a periodic check be made that they are torqued accordingly. Our application guide page will answer most of your application fitment questions but ask us for unanswered question. Sold in pair.
Size:
Fitment and specs
- 1/4" thick with a lightweight aluminum build
- Fits 5 lug standard bolt patterns from 4 1/2" to 5"
- Covers 5x4.5 (5x114.3), 5x4.75 (5x120.65), and 5x5 (5x127)
- Sold as a pair
Install with the spacer sitting flush against a clean, rust-free hub face so the wheel still seats flat. Confirm each lug nut makes about seven full turns with the spacer in place, then torque to your vehicle's spec using our torque reference chart. Re-torque after 50 to 100 miles of driving.
Common questions
Will 1/4" of spacing clear my brake calipers?
Measure first. A 1/4" spacer moves each wheel out exactly 1/4", so check the gap between the wheel and the point of contact. If you are short by more than that, you need a thicker spacer or a different wheel offset.
Do I lose stud engagement with a 1/4" spacer?
The spacer does take up 1/4" of thread length, which is why the turn count matters. If every lug nut still makes about seven full turns, engagement is solid; if not, fit longer studs.