4x100 Wheel Spacers | Bolt-On (Pair)
| Converts from (hub) | 4x100mm |
|---|---|
| Converts to (wheel) | 4x100mm |
| Center bore | 64mm |
| Stud thread | 12x1.5 |
| Thickness options | 1", 1.25", 1.5", 2" |
| Includes | Wheel studs included |
| Sold as | Pair (2 pieces) |
|
This type of adapter is used for 4 lug 100mm bolt pattern cars to fit 4 lug 100mm bolt pattern wheels. CNC machined billet aluminum and thickness options are 1", 1.25", 1.5" and 2". New wheel studs are included. These adapters can be used on the following US-model cars. For any vehicle, confirm a 4x100 bolt pattern and a hub smaller than the adapter's 64mm center bore before ordering: Vehicle fitment
Fasteners: the adapter's wheel studs are 12x1.5, so use 12x1.5 lug nuts with the seat your wheels require. On vehicles with lug nuts, mount the adapter with hub-side lug nuts in your vehicle's stud thread and the adapter's required seat. On vehicles with lug bolts, use hub-side lug bolts in the vehicle's required thread and the adapter's required seat, bought separately; lug bolts are not included. Confirm full engagement, fully recessed bolt heads, flush seating and clearance from brake or other components. Some listed cars, such as the Nissan 200SX, have 12x1.25 studs: check your stud thread, and on those cars mount the adapter with 12x1.25 hub-side lug nuts, never 12x1.5 nuts. Our premium quality adapters ensure durability and strength. Price is for a pair (2 adapters). **If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters. |
Fitment and specs
- Bolt pattern unchanged: 4x100mm in and out
- Acts as a spacer to add track width
- For compatible 4x100mm wheels; verify bore, lug-nut seat and clearance
- Ships as a pair
- Free US shipping
With 4x100mm on both faces, this adapter moves each wheel outward while retaining the bolt pattern. Confirm wheel, tire, brake and body clearance. Set it flat on a clean hub, confirm full thread engagement, and shorten any factory studs that protrude past the adapter face so the wheel seats flush. Torque to your vehicle's factory specification using the torque reference chart, and re-torque after the first 50 to 100 miles.
Common questions
Are wheel adapters safe?
They are when installed right: flush on a clean hub, threads fully engaged, torqued to spec, and re-torqued after the first 50 to 100 miles. Confirm the fit against the applications shown in the description above.
Will my current wheels still fit?
The wheel-side pattern remains 4x100mm. Confirm wheel bore, lug-nut seat, 12x1.5 wheel-nut compatibility and clearance before fitting your existing wheels.
Shop related: 4x100 hub wheel adapters · 4 lug same pattern wheel adapters