5x5.5/135 & 6x5.5/135 Wheel Spacer 1/4" Thick (Pair)
| Bolt pattern(s) | 5x5.5" (5x139.7mm), 5x135mm, 6x5.5" (6x139.7mm), 6x135mm |
|---|---|
| Thickness | 1/4" |
| Sold as | Pair (2 pieces) |
Light aluminum build. They are 1/4" thick. Fit Ford 5 lug with standard 5 1/2", 135mm bolt pattern and 6 lugs bolt 5.5", 135mm bolt pattern (they do not fit Dodge Dakota and GMC Envoy, Trailblazer). Please check the thickness of spacers and make sure your lugs and studs on your are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Re-torque after the first 50 to 100 miles. Our application guide page will answer most of your application fitment questions but ask us for unanswered question. Sold in pair.
Size:
Fitment and specs
- Fits the 5x5.5/135 bolt pattern (5-lug)
- Also fits the 6x5.5/135 bolt pattern (6-lug)
- 1/4" thick for a small track-width gain
- Same pattern hub side and wheel side, so your current wheels bolt back on
- Sold as a pair
This is a spacer, so the bolt pattern passes through unchanged and each wheel is pushed out slightly rather than converted to a new pattern. Seat it flat against a clean hub, torque to your vehicle's factory specification using the torque reference chart, and re-torque after the first 50 to 100 miles. Do not shorten wheel studs merely because they project through this slip-on spacer. Use wheel studs or lug bolts with the required thread and seat, long enough to maintain the thread engagement required by the vehicle, wheel and fastener manufacturers at the chosen spacer thickness; fit suitable longer hardware if needed. Confirm that the spacer and wheel seat flush, lug nuts do not bottom out, and fasteners do not contact other components.
Common questions
Will my current wheels still fit?
Yes. The pattern matches on both sides, so wheels that mount to your hub today mount to the spacer the same way, set out by 1/4".
Do these change my bolt pattern?
No. They add track width only. Match your hub to the 5x5.5/135 or 6x5.5/135 designation in the title before ordering to confirm the right fit.