Spline Lug Bolt 12x1.50 Thread 24MM Shank

Fitment and specs

• Thread size: 12x1.5
• Shank length: 0.93 inches (24mm); overall length 2.09 inches (53mm)
• Spline drive head fits tuner wheels with ultra thin lug holes where a standard socket will not go
• Six spline installation key included
• Offered in 16, 20, or 24 piece kits

Thread each bolt in by hand first; with lug bolts the wheel hangs on the hardware as you install it, so keep the wheel supported until several bolts are snug. Work in a star pattern, torque to your vehicle's spec using our torque reference chart as a guide, and re-torque after 50 to 100 miles of driving.

Common questions

What does the 24mm shank measurement refer to?
The shank is the smooth section between the head and the threads, 0.93 inches (24mm) on this bolt. It should match what your wheel was designed around, so compare it against one of the bolts you are replacing before you order.

Do I need to match the seat type on my wheels?
Yes. Conical, mag, and ball seats are cut differently and are not interchangeable. Hardware with the wrong seat will not center or clamp the wheel correctly, so verify which seat your wheels use before switching bolts.