14x1.5 Red Spline Spike Lug Nuts 4.4" Long Bulge Acorn with Key

SPECS - M14x1.5 Thread Size | Overall Length 4.4” (112mm) | 60 Degree Cone/Conical Seat | Closed End | 1 Machined Socket Key

FITMENT - Wheels with a M14x1.5 thread size and 60 degree conical seat

SET - 24 OR 32 Piece Set Red Spline Spike Lug Nuts + Socket Key

SAFETY - Through hardened steel construction with a heat treated finish creates a heat-resistant, durable, anti-corrosion, and high-strength product. Strip-resistant machined threads for a secure fit on your wheel studs

AFTERMARKET - These lug nuts are designed for aftermarket wheels. This part might match the thread pitch of your vehicle but in many cases the lug seat is not large enough to create enough clamping force to safely secure the factory wheel to your vehicle.

Fitment and specs

• Thread size: M14x1.5
• Overall length: 4.4" (112mm)
• 60 degree cone (conical) seat, closed end
• Spline drive with one machined socket key included
• Through hardened steel with a heat treated red finish
• Sold as a 24 or 32 piece set

Thread each nut on by hand to protect the machined threads, then drive it with the included socket key and tighten in a star pattern to your vehicle's spec. Our torque reference chart covers common values by thread size. Re-torque after 50 to 100 miles of driving.

Common questions

Will these fit my factory wheels?
They are designed for aftermarket wheels with a 60 degree conical seat. Even when the thread pitch matches your vehicle, a factory wheel's lug seat is often not large enough for these to create the clamping force needed to hold the wheel safely.

Do I need a special tool to install them?
Yes. The spline drive only works with the included machined socket key, which then pairs with a standard wrench or torque wrench. Keep the key in your vehicle so a wheel can come off on the road.