Toyota Wheel Spacers

Tacoma 1995–2023 (not the 1995–2015 2WD), 4Runner 1984–2024, FJ Cruiser 2007–2014 and Tundra 2000–2006 wheel spacers: 6x139.7 (6x5.5"), 12x1.5 thread, 106.1mm hub

These Toyotas use 6x139.7 with a 12x1.5 thread and a 106.1mm hub: Tacoma 1995–2023 (not the 1995–2015 2WD), 4Runner 1984–2024, FJ Cruiser 2007–2014, Tundra 2000–2006, Sequoia 2001–2007, T100 1993–1998, Pickup 4WD 1979–1995 and the Land Cruiser FJ60 and FJ62 1981–1990 and 80-series 1991–1997. Two pairs fit them: the 6x5.5" hub centric Toyota pair (106mm bore, 12x1.5 studs, 1" to 2"), which centers on the hub, and the 6x5.5" bolt-on pair with 12x1.5 studs (108mm center bore, 0.75" to 3"), which clears the hub and centers on the studs.

Tacoma 2024–2026, 4Runner 2025–2026, Sequoia 2023–2026 and Tundra 2022–2023 wheel spacers: 6x139.7, 14x1.5 thread, 95mm hub

Toyota moved these trucks to a 14x1.5 thread and a 95mm hub: Tacoma 2024–2026, 4Runner 2025–2026, Sequoia 2023–2026 and Tundra 2022–2023 (later Tundras are not yet confirmed by an outside source). The 12x1.5 pairs above do not fit them. Choose the 6x5.5" hub centric Tundra 2023 pair (95mm bore, 14x1.5 studs, 1.25" or 1.5"), or the 6x5.5" bolt-on pair with 14x1.5 studs and a 108mm center bore (1" or 1.5"). The Land Cruiser 2024–2026 uses the same 6x139.7 pattern, but its stud thread and hub are not yet confirmed by an outside source, so check both before choosing a pair.

Tundra 2007–2021 and Land Cruiser 1998–2021 wheel spacers: 5x150, 14x1.5 thread, 110mm hub

The Tundra 2007–2021 and Land Cruiser 1998–2021 use 5x150 with a 14x1.5 thread and a 110mm hub. Fit the 5x150 hub centric Tundra pair (110mm bore, 14x1.5 studs, 1.5" or 2") or the 5x150 bolt-on pair (110.1mm center bore, 14x1.5 studs, 1" to 2"). The Sequoia 2008–2022 shares the 5x150 pattern and 14x1.5 thread, but outside sources put its hub at 110mm or 110.5mm and neither pair's bore clears a 110.5mm hub, so measure the front and rear hub pilots first and ask us before ordering.

Camry 1996–2023, RAV4 1996–2026, Highlander 2001–2026, Sienna 1998–2026 and Tacoma 2WD 2005–2015 wheel spacers: 5x114.3 (5x4.5"), 12x1.5 thread, 60.1mm hub

These use 5x114.3 with a 12x1.5 thread and a 60.1mm hub, so the 5x4.5" hub centric Lexus and Toyota pair (60.1mm bore, 12x1.5 studs, 1") and the 5x4.5" bolt-on pair with 12x1.5 studs (73mm center bore, 0.75" to 2") both fit:

• Camry 1996–2023, Avalon 1995–2022, Solara 1999–2008, Cressida 1989–1992, Supra 1987–1998, MR2 1991–1995 and US Mirai 2016–2020
• RAV4 1996–2026, Highlander 2001–2026, Venza 2009–2015 and 2021–2022, C-HR 2018–2022, Corolla Cross 2022–2026, Corolla iM 2017–2018, Prius v 2012–2017 and the 2.4L Matrix 2009–2013
• Sienna 1998–2026, Previa 1991–1997 and Tacoma 2WD 2005–2015 (on a 1995–2004 Tacoma 2WD, outside sources disagree between a 60.1mm and a 67.1mm hub, so measure the front hub and rear axle flange before choosing the 60.1mm hub centric pair; the 73mm-bore pair clears either)

The Pickup 2WD 1979–1995 is 5x114.3 with a 12x1.5 thread (1-ton and cab-chassis versions are not covered); its hub is not confirmed by an outside source and no pair here is listed for it, so measure the hub and ask us before ordering. The Prius 2023–2026 and GR Corolla 2023–2026 use the 5x114.3 pattern; their stud thread and hub are not yet confirmed by an outside source, so check them against the 12x1.5 pair before ordering. A 1992–1995 Camry is 5x114.3, but its thread and hub are not confirmed either.

Corolla sedan 2003–2026 (not the Corolla Cross, iM, GR Corolla or hatchback), Prius 2004–2022 (not the Prius v or Prius c) and Celica 2000–2005 wheel spacers: 5x100, 12x1.5 thread, 54.1mm hub

The Corolla sedan 2003–2026 (the GR Corolla is 5x114.3 and the hatchback is not confirmed by an outside source), Matrix 1.8L 2003–2013, Prius 2004–2022 (not the Prius v or Prius c), Celica 2000–2005 and Camry 1983–1991 use 5x100 with a 12x1.5 thread and a 54.1mm hub. Fit the 5x100 hub centric Toyota and Scion pair (54.1mm bore, 12x1.5 studs, 1") or the 5x100 bolt-on pair (57.1mm center bore, 12x1.5 studs, 1" to 2"). The 86 2017–2020 and GR86 2022–2023 are also 5x100 but with a 12x1.25 thread and a 56.1mm hub: their match is the 5x100 hub centric Subaru pair (56.1mm bore, 12x1.25 studs, 1"), not the 12x1.5 pairs.

Corolla 1988–2002, Yaris 2007–2020, Echo 2000–2005, Tercel 1983–1998, MR2 1985–1989 and MR2 Spyder 2000–2005 wheel spacers: 4x100, 12x1.5 thread, 54.1mm hub

The Corolla 1988–2002 and front-wheel-drive Corolla 1987 (not that year's rear-drive SR5 and GT-S coupes), Corolla FX and FX16 1987–1988, Echo 2000–2005, Yaris 2007–2020, Yaris iA 2017–2018, Tercel 1983–1998, Paseo 1992–1997, MR2 1985–1989, MR2 Spyder 2000–2005, Prius 2001–2003 and Prius c 2012–2019 use 4x100 with a 12x1.5 thread and a 54.1mm hub. Fit the 4x100 hub centric pair (54.1mm bore, 12x1.5 studs, 1") or the 4x100 bolt-on pair (64mm center bore, 12x1.5 studs, 1" to 2"). The Celica 1971–1977 is 4x114.3 with a 12x1.5 thread and takes the 4x4.5" bolt-on pair (73mm center bore, 1" to 2"). The Grand Highlander 2024–2026 uses the 5x120 pattern; its stud thread and hub are not yet confirmed by an outside source, and this page carries no 5x120 pair.

Choosing a Toyota spacer: thread, hub bore and thickness

Bolt-on spacers bolt directly to factory studs using separate hardware and feature their own integrated studs to mount the wheel, ideal for wider setups. Every pair on this page is bolt-on.

• Thread: 12x1.5 on most Toyotas through 2023; 14x1.5 on the 5x150 trucks and on the Tacoma 2024–2026, 4Runner 2025–2026, Sequoia 2023–2026 and Tundra 2022–2023; 12x1.25 on the 86 2017–2020 and GR86 2022–2023. A bolt-on pair's studs must carry your vehicle's thread. On a hub with wheel studs, your own lug nuts clamp the pair to the hub; on a hub with lug bolts, the hub-side bolts are bought separately in your car's thread and seat, because bolt-on spacers do not include lug bolts. The wheel then mounts on the pair's studs with the lug nuts named in that pair's listing, or with lug nuts that match its stud thread if the listing names none.
• Hub bore: a hub centric pair's bore matches the hub (106mm, 95mm, 110mm, 60.1mm, 54.1mm or 56.1mm here); a lug centric pair's center bore only has to clear the hub (108mm, 110.1mm, 73mm, 57.1mm or 64mm); a bore smaller than the hub does not seat. If your Toyota is not named above, measure the hub, or measure your bolt pattern if you are unsure of it.
• Thickness available: 6x5.5" hub centric 106mm pair 1" to 2", 108mm 12x1.5 pair 0.75" to 3", Tundra 2023 pair 1.25" or 1.5", 108mm 14x1.5 pair 1" or 1.5"; 5x150 pairs 1" to 2"; 5x4.5" pairs 0.75" to 2" (hub centric 1"); 5x100 and 4x100 pairs 1" to 2" (hub centric 1"). Choose the thinnest pair that clears; on a thin pair the factory studs can stand proud of the face and need shortening, most often at 1".
• Torque: torque the nuts to Toyota's specification for your model and check them again after the first 50 to 100 miles.

Common questions

Which spacers fit a Toyota Tacoma? Tacoma 1995–2023 (not the 1995–2015 2WD): 6x139.7 with 12x1.5 studs and a 106.1mm hub, so the 106mm hub centric pair or the 108mm 12x1.5 pair. Tacoma 2024–2026: 14x1.5 studs and a 95mm hub, so the Tundra 2023 hub centric pair (95mm bore) or the 108mm 14x1.5 pair. Tacoma 2WD 2005–2015 is 5x114.3 with a 60.1mm hub and takes the 60.1mm hub centric pair or the 5x4.5" 12x1.5 pair; on a 1995–2004 2WD, measure the hub first (sources disagree between 60.1mm and 67.1mm).

Which spacers fit a Toyota Tundra? Tundra 2000–2006: 6x139.7, 12x1.5, 106.1mm hub. Tundra 2007–2021: 5x150, 14x1.5, 110mm hub. Tundra 2022–2023: 6x139.7, 14x1.5, 95mm hub. Each generation has its own pair above, and none of them interchange.

Which spacers fit a 4Runner? 4Runner 1984–2024: 6x139.7 with 12x1.5 studs and a 106.1mm hub. 4Runner 2025–2026: 14x1.5 studs and a 95mm hub, the same as the 2024–2026 Tacoma.

Do the six-lug Tacoma spacers fit a RAV4 or Camry? No. The RAV4 1996–2026 and Camry 1996–2023 are 5x114.3 with a 60.1mm hub; use the 60.1mm hub centric pair or the 5x4.5" 12x1.5 pair, the same two pairs the Tacoma 2WD 2005–2015 takes.

Do bolt-on Toyota spacers include lug nuts? Each listing says what it includes. The pair fastens to the hub with your own lug nuts on a studded hub, or with hub-side lug bolts in your car's thread and seat, bought separately, on a lug-bolt hub, since bolt-on spacers never include lug bolts. The wheel mounts on the pair's studs with the lug nuts named in that listing, or with lug nuts matching its stud thread if none are named.

Can a spacer change my Toyota's bolt pattern? No. A spacer keeps the hub's pattern. For wheels drilled to a different pattern, see wheel adapters for Toyota Tacoma, wheel adapters for Toyota Tundra or wheel adapters for Toyota 4Runner.

More wheel spacers

Browse all wheel spacers, bolt-on wheel spacers and hub centric wheel spacers, or shop by lug count: 6 lug wheel spacers, 5 lug wheel spacers and 4 lug wheel spacers. The same 73mm-bore 5x4.5" 12x1.5 pair, 64mm-bore 4x100 pair and 4x4.5" pair are on our Honda wheel spacers page.