Wheel Adapter 8 Lug 170 To 8 Lug 6.5" (Pair) 14x1.5 Stud

This type of adapter is used for 8 lug 170mm bolt pattern Ford trucks to fit 8 lug 6.5" (165mm) bolt pattern wheels. Adapter stud size 14mmx1.5. CNC machined 6061 T6 billet aluminum. New wheel studs and lug nuts are included.

These adapters can be used on the following trucks, among others:

• Ford: F250/F350 (03-on), Excursion (03-on)

Our premium quality adapters ensures durability and strength. Price is for a pair (2 adapters).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" and 1.5" thick adapters.

Fitment and specs

• Hub side bolt pattern: 8x170mm
• Wheel side bolt pattern: 8x6.5" (8x165.1mm)
• Stud thread: 14x1.5
• Bolts to your 8x170mm hub so you can run 8x6.5" wheels
• Sold as a pair, with free US shipping

Place each adapter flush against a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification with the torque reference chart as your guide. Trim any factory studs that stick past the adapter face so the wheel seats flat. Re-torque after 50 to 100 miles.

Common questions

Are wheel adapters safe?
Yes, when they rest flat on the hub with full stud and thread engagement and are torqued to spec, then re-torqued after a short drive. Seating and torque do the work.

What is the difference between 8x170mm and 8x6.5"?
They are two different 8 lug patterns. This adapter mounts on an 8x170mm hub and gives you an 8x6.5" (8x165.1mm) face, letting you fit wheels drilled for that pattern.