Wheel Adapter 5 Lug 5.5 To 5 Lug 4.5 (Pair) 87mm Bore

This type of adapter is used for 5 lug 5.5" (139.7mm) bolt pattern cars to fit 5 lug 4.5" (114.3mm) wheels. CNC machined 6061 T6 billet aluminum. Adapter bore diameter is 87mm. Check your hub bore before you purchase. New wheel studs are included. These adapters can be used on the following cars, among others:

• Ford: Bronco (66-on), F 1/2 ton F-100, 150 (54-96), 1/2 Ton E-100, 150 Van (70-96)
• Dodge: Dakota (05-2011), Durango (04-2010), Ramcharger (79-83), Ram 1/2 Ton 2&4 WD (94-2011), 1/2 & 3/4 Ton Truck (79-93), Ram Van (85-96)

Our premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.

Fitment and specs

• Hub side: 5x5.5" (5x139.7mm) bolt pattern
• Wheel side: 5x4.5" (5x114.3mm) bolt pattern
• 87mm center bore
• Sold as a pair

These adapters bolt onto your 5x5.5" hub so you can run 5x4.5" wheels. Mount each one flat against a clean hub surface, torque the hardware to your vehicle's factory specification, and re-torque after 50 to 100 miles. Our torque reference chart covers the correct tightening pattern.

Common questions

Are wheel adapters safe?
Yes, as long as they seat flat on a clean hub, are torqued to spec with full stud and thread engagement, and get re-torqued after a short drive. Factory studs that protrude past the adapter face should be shortened so the wheel seats flush.

What does the 87mm bore do?
It is the opening at the center of the adapter. Your wheels need to clear or center on this bore for a proper fit, so check it against your setup before ordering. Free US shipping is included.