Wheel Adapter 5 Lug 4.5 To 5 Lug 120 (Pair)

This type of adapter is used for 5 lug 4.5" (114.3mm) bolt pattern cars to fit 5 lug 120mm bolt pattern wheels. CNC machined billet aluminum. New wheel studs are included. These adapters can be used on the following cars, among others:

• Ford: Mustang (94-on), Cobra (97-on), Explorer (90-on), Ranger (81-on), Bronco II (82-90), Full size (Galaxie, T-Bird, etc) (57-72), Probe (88-97)
• Jeep: Cherokee (80-on), Wrangler (80-on), Grand Cherokee (93-98), Liberty (02-on)
• Acura: 3.2 CL V-6 (98-on), Legend (91-on), RSX (01-on), NSX (91-on), TL 3.2 (96-on), MDX (01-on)
• Chrysler: 300C (05-on), 300M (98-on), Sebring LXI (95-on), Town & County Van/Voyager (88-on), Full size (Cordoba, Mirada, etc) (68-87)
• Dodge: Grand Caravan, Caravan LE (87-on), Dakota (87-90), Stratus (02-on), Stealth (91-96), Magnum (05-on), Intrepid (93-on)
• Honda: Accord (03-on), Accord V-6 (98-on), S2000 (99-on), Pilot (03-on), Element (03-on), CR-V (97-on), Odyssey (95-on)
• Hyundai: Tiburon (00-on), XG 300/350 (01-on), Santa Fe (01-on)
• Infiniti: G35 (03-on), I30 (95-97), J30 (92-97), M45 (03-on), Q45 (90-on)
• Lexus: All except ES250 (not including SUV), RX300 (98-03), RX330 (04-on)
• Mazda: 626 (88-on), 929 (88-on), MPV (89-on), Tribute (01-on)
• Mitsubishi: Eclipse (89-on), Galant (97-on), 3000, GT, SL (91-97), Starion, Turbo (86-89), Outlander (03-on)
• Nissan: Altima (02-on), Maxima (89-on), 240SX (95-96), 300ZX, Turbo (84-96), 350Z (03-on), Murano (03-on), Quest (93-on)
• Toyota: Avalon (95-on), Camry (92-on), Solara (99-on), MR-2 (90-95), Highlander (01-on), Rav4 (96-on), Sienna (97-on)

Our premium quality adapters ensures durability and strength. Price is for a pair (2 pieces).

**If the hub studs protrude outside the adapter and prevent the wheels to sit flush on the adapter plates, it is required to shorten the factory studs. It happens most often on 1" thick adapters.

Fitment and specs

• Mounts to a 5x4.5" (114.3mm) hub
• Accepts 5x120mm wheels
• Adapts between two 5-lug patterns
• Sold as a pair

These let a 5x4.5" hub run 5x120mm wheels. Seat each adapter flush on a clean hub with full stud and thread engagement, then torque to your vehicle's factory specification, checking the torque reference chart for the right value. If your factory studs protrude past the adapter face, shorten them so the wheel seats flat, and re-torque after 50 to 100 miles.

Common questions

Are wheel adapters safe?
They are when seated flat, fully engaged on both thread sets, torqued to spec, and re-torqued after the first short drive. Confirm your hub is 5x4.5" before mounting.

Will my current wheels still fit?
Only if they are 5x120mm. The wheel side is drilled to 5x120mm, so your wheels need that pattern to bolt on.