Wheel Adapter Studs 10x1.25

Wheel adapter studs 10x1.25 thread size with 1.8" overall length (L1). Knurl diameter (D1) is 0.5". Compatible with some of our 4 lug ATV wheel adapters that come in 10x1.25 thread size stud.

Fitment and specs

• Thread size: 10x1.25
• Overall length (L1): 1.8"
• Knurl diameter (D1): 0.5"
• Fits select 4 lug ATV wheel adapters that use 10x1.25 studs

Match all three measurements to the stud you are replacing before ordering, since not every 4 lug ATV adapter uses this size. Once the studs are installed and the wheels are back on, torque the lug nuts to the value in our torque reference chart and re-torque after 50 to 100 miles of riding.

Common questions

Will these work with my ATV wheel adapter?
They are compatible with some of our 4 lug ATV wheel adapters, specifically the ones built with 10x1.25 thread studs. Check your adapter's listing or measure the stud you are removing to confirm before ordering.

Why does the knurl diameter matter?
The knurl is the ridged section that grips the stud hole. It needs to match the hole diameter, 0.5" here, so the stud seats tight and does not spin when you torque the nut down.