Wheel Adapter Studs 14mm 1.50
Wheel adapter studs 14x1.5 thread size with 2.2" overall length (L1). Knurl diameter (D1) is 0.6". They are not compatible with our 2-piece conversion adapter studs.
Fitment and specs
- Thread size: 14x1.5
- Overall length (L1): 2.2 inches
- Knurl diameter (D1): 0.6 inch
- Press-in knurled stud for wheel adapters that use 14x1.5 studs
- Not compatible with our 2-piece conversion adapter studs
Match both the thread and the knurl diameter to the stud you are replacing, since the knurl is what holds the stud tight in the adapter plate. Press it in straight until the head seats flush against the back of the plate. Then torque your lug nuts to spec using our torque reference chart and re-torque after 50 to 100 miles.
Common questions
Can I use these in an adapter that came with 12x1.5 studs?
No. The 14x1.5 thread will not work with lug nuts or adapter holes sized for 12x1.5, and the knurl diameter has to match the adapter exactly. Replace studs only with the same size your adapter was built with.
Will these fit my 2-piece conversion adapter?
No, these are not compatible with our 2-piece conversion adapter studs. They fit adapters built with 14x1.5 studs, measuring 2.2 inches overall with a 0.6 inch knurl.