4 Lug 5/16" Thick 4x100-114.3 or 4 x 4"-4.5" Wheel Spacer (Pair)
| Bolt pattern(s) | 4x100mm |
|---|---|
| Thickness | 5/16" |
| Sold as | Pair (2 pieces) |
Light aluminum build. 5/16" thick. Fit 4 lug with metrics 100mm - 114.3mm or standard 4" - 4 1/2" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers. Re-torque after the first 50 to 100 miles and check torque periodically after that. Our application guide page will answer most of your application fitment questions but ask us about unanswered questions. Sold in pair.
Size:
Fitment and specs
- 5/16" thick with a lightweight aluminum build
- Fits 4 lug metric bolt patterns from 100mm to 114.3mm
- Fits 4 lug standard bolt patterns from 4" to 4 1/2"
- Covers common fitments like 4x100 and 4x114.3 (4x4.5)
- Sold as a pair
Set each spacer flat against a clean hub face before hanging the wheel. With the wheel mounted, check that you still have the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs (or longer lug bolts on cars that use them) if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Torque to spec with our torque reference chart and re-torque after the first 50 to 100 miles.
Common questions
Will the same spacer fit both 4x100 and 4x114.3 wheels?
Yes. The design accommodates any 4 lug pattern from 100mm through 114.3mm, so both of those patterns are covered without modification.
How do I check that my studs are long enough?
Install the spacer and wheel, then check the thread engagement against what the vehicle, wheel and fastener manufacturers require. If it falls short, fit suitable longer studs first.