5 x 100-120mm Spacer 5/16" Thick (Pair)
| Thickness | 5/16" |
|---|---|
| Sold as | Pair (2 pieces) |
Light aluminum build. They are 5/16" thick. Fit 5 lug with standard 100 - 4.75" bolt pattern. Please check the thickness of spacers and make sure your lugs and studs are long enough. Use the thread engagement required by the vehicle, wheel and fastener manufacturers. Re-torque after the first 50 to 100 miles and check torque periodically after that. Our application guide page will answer most of your application fitment questions but ask us about unanswered questions. Sold in pair. (Please note these spacers do not work on 14x1.5 thread size studs if the bolt pattern is 5x100).
Fitment and specs
- Fits 5 lug bolt patterns from 100mm through 120mm (4.75 inch)
- Thickness: 5/16 inch
- Lightweight aluminum build
- Not compatible with 14x1.5 thread studs on the 5x100 pattern
- Sold in pairs
The spacer slips over your existing studs and sits between the hub and the wheel, so both mating faces need to be clean and flat. Torque the lug nuts to your vehicle's spec from our torque reference chart and check that you have the thread engagement required by the vehicle, wheel and fastener manufacturers; do not rely on a single turn count for every thread size. Fit suitable longer studs (or longer lug bolts on cars that use them) if needed, confirm the wheel and spacer seat flush, and check that closed-end lug nuts do not bottom out. Re-torque after the first 50 to 100 miles of driving.
Common questions
Will these fit a 5x100 car with 14x1.5 studs?
No. That specific combination does not work with these spacers, so check your stud thread size before ordering if your vehicle runs the 5x100 pattern.
How do I know my studs are long enough?
A 5/16 inch spacer moves the wheel out by that amount, which costs you the same amount of thread. Check that the studs still give the thread engagement required by the vehicle, wheel and fastener manufacturers; if they do not, install suitable longer studs first.